Это видео недоступно.
Сожалеем об этом.
Delonghi Dinamica Coffee Machine, Not flushing and filling the drip tray
HTML-код
- Опубликовано: 21 авг 2024
- This is an attempt to repair a Delonghi Dinamica Coffee Machine, the device is not not flushing properly/fully when first powered on and is also filling the drip tray.
Lets take a look
I love you! Your the best! Struggle for a while but you have the solution. And it cost me nothing because I had a O ring. I'm so happy! Thank again!😅
Wow, this simple O-ring, makes the difference !
Thank you #PositiveFix you really did a great job.
I'm glad you found it interesting
I struggled for weeks trying to find a solution for this issue. Replaced various parts of the machine to no avail until I found this video. Replacing this tiny o-ring finally solved my problem. Thank you, you are a star!!
Glad I could help
Thank you so much. You saved me a minimum ~$300 service charge or even a new machine. $20 variety silicone O-Ring kit off Amazon worked just fine; I just eyeballed them for fit. Fantastic explanation - I would have never found that little screw cap thing that popped off if you hadn't mentioned what that was. Found the spring around 10 feet away on the floor.
So glad my video is saving people money and also keeping these machines out of landfill.
4:06, on the top of the slider, there is an hole with a spring, and little ball. These parts allow the slider to stay in position. But in reality, it's not absolutely necessary. The spring and ball are installed at 15;35
good video. Green attitude ! With 10mn more you can remove the complete infuser, and clean it deeply. This part is the same on an magnifica S. The most difficult in this repair is to find torx with center pin, and replug some pipe
It worked great!!!!!!!!! Thank you so much. That oring in my machine was not broken but it had weared out. A new one did the job
I'm glad my video helped fix the issue for you. Please subscribe for more useful repair videos and like this video if it helped you.
Finally fixed thank you, one o ring I missed after a week of changing the others 😊
Glad it helped
I've just done this, and while the machine now works (thanks very much!) I have 2 extra screws so I'm gonna have to go back in
If it’s working then I won’t worry about it 😂, I call those ‘pocket screws’ because when you’re done and realise you have screws left, just put them your pocket!
Thank You for help!
I hope you managed to fix yours 😊
Could you share a link to the 'O' ring kit please?
Does anyone know definitively the size of the O ring that you need to replace? I have seen multiple videos, but not a specific size. I have heard 6x1 and 6x1, 5. Not exactly sure where to find it. Any help would be appreciated.
Do you have a part number or link to the service kit?
It was purchased from eBay and came from Germany, quick deliver though:
www.ebay.co.uk/itm/304660115367?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=AQmADgC_SHO&sssrc=2349624&ssuid=teEjHMJcQkW&var=&widget_ver=artemis&media=COPY
Denn antrieb würde ich ein bisschen fetten mit Lagerfett
After stripping the coffee maker, I found my o ring set had none of the right sizes. It looks like you need 1.5mm o rings in the following sizes (od.id):
7x4, 8x5, 21x18, 9.5x6.5, 14.5x11.5. However this is from measuring with calipers, not a spec sheet so may be wrong.