Видео

Thanks for sharing. What was your eyes' error (in diopters) before surgery? And did you have a choice between Lasik and ICL, or was ICL the only option?

Did you have perfect vision right away? Or did it take sometime, more than a couple of hours?

A year old video,May I please get an update on the tanner plate?? Thank you kindly.🙏 Merry Christmas 🎅🏼

For competition that looks like a great sight. For concealed carry that looks very difficult to conceal!

I just had one eye done 3 days ago, the lens keeps unfocusing when looking at the screen, hope that goes away.

The 83 version in 380 is pretty sweet! Cheers!

For those having a hard time w the safety. Push that gold metal piece inwards (towards front of gun) slightly and it will help w the tension. Dont overdo it. You can use a small screw driver to push it. Now i can engage/disengage with my right thumb no problem.

LCP max is a poor product. sent mine back for shooting 4 inches low and came back the same way.

The original BRNO model 2 from the original BRNO factory are superior in accuracy and quality to all later CZ rifles. But the CZ 457 trigger is better

That follower challenge is real. Once it starts happening, the follower can become damaged and may need to be trimmed. Once I did that, it worked without issue. Lockback was not affected.

With the unloaded gun work the safety repeatedly and vigorously with the 2 finger grip you demonstrated. It just needs a good break in.

Literally has this same issue. But with an aftermarket c3r slide and upper. I basically oiled the gun and racked the slide about 300 times in like 4 days. Seemed to work after. Shot fine too

Literally has this same issue. But with an aftermarket c3r slide and upper. I basically oiled the gun and racked the slide about 300 times in like 4 days. Seemed to work after. Shot fine too

Is it a gen 4 oem slide? That’s probably ur issue if it is

It looks gideon is better？

Simple fix when the mag follower gets stuck: depress the FRONT half of the bullet. That tilt is all it takes.

Thank you for the upload very informative.

I bought a PSA frame and put a 43x slide on it. I have cycling issues. Every mag I run through it there's at least 2 jams. I was hoping it would "break in" but I put probably 150-200 rounds through it, but no difference yet. I'm ready to just pick up an oem frame

I just received mine today. It’s also going on a mk4 . I plan on zeroing it at the range later today

Just bought a brand new LCP Max 75th anniversary.. very disappointed with the performance low about a foot and a half and left 6 in at 15:FT !!!! . Completely unacceptable.. the thing is if I just put the front sight on the target without using the rear I get pretty well centered Palm size groups.. I'm going to be contacting Ruger as I heard that they will change the barrel hence the point of aim

Yes it’s definitely worth the hype, in fact it’s such a fantastic little gun I think I’m gonna buy another no joke

I have a weak grip from neuropathy so the Uplula is the only way to load mags. It takes some pressure to get the 12th round in and to insert the fully loaded mag into the gun. I have found that grasping the front slide serrations gives me a better better grip when racking the action. The safety will work better after compressing the spring a bit, putting a small amount of grease on the friction area and moving it repeatedly. Mine shot left and needed the sights moved, might be an individual thing as the Glock 42 that I previously owned shot to the left with me also. I'm not a big handgun shooter. The tab on the trigger bar exposed in the little cutout on the right rear of the receiver is a safety mechanism that keeps the striker from being released until the action is closed. While the slide is any further back that tab pushes the trigger bar down so that it cannot release the striker, the tab can only let the trigger bar rise when the slide is fully forward and the tab reaches the slide notch. The one thing that I don't really care for is the rear sight, I wish that it was a two dot tritium like shown by the video's maker. That would be perfect with the oem tritium front sight. Overall I love the little pistol though. No trading this one away!

Love mine, but the safety took some lube and break in. Also the 12 round mag refuses to allow the 12th to enter.

Thanks for the review

Hi! I got EVO ICL last week. Quick question - how do you know that yours rotated a little? Did your doctor notice it? Also, I notice I see a ring of light as well especially when I look towards the sun. Did you have that symptom as well in the sunlight and does it get better? Would really appreciate a response when you get a chance thank you!

Hi! I got EVO ICL last week. Quick question - how do you know that yours rotated a little? Did your doctor notice it? Also, I notice I see a ring of light as well especially when I look towards the sun. Did you have that symptom as well in the sunlight and does it get better? Would really appreciate a response when you get a chance thank you!

Excellent content

Its about dam time!!!!

Got my micro frame today ran 200 rounds no issue . The sct frame flexes near the rear causing issues I have seen personally . You just got a bad one call them up

hi, i had my icl surgery done last week..What is the possibility of the icl rotation? i have astigmatism and i am bit concerned about it

I ran that votatu for 2 years now on my PCC and had no issues so far. Seems decent enough for that. The only drawback I find is that it’s heavy. I would buy this again! Surefire is an unbelievable ripoff in my opinion

Im getting icl nov. 20th

It’s the barrel lugs sticking in locking block. Would think some rounds through would wear barrel lugs to wear into locking block. Try swapping barrels and can see what issue is. Can even slide barrel only into frame locking block and angle front upwards and can see it pinch barrel from releasing

I mean, I'm into DIY but I'm still not convinced not to get the Volquartsen kit.

I took mine out for the first time yesterday. My LCP max definitely shoots very low and left. With a laser training bullet it is dead on. Obviously with live ammunition, something is shifting at detonation.

My 75th Anniversary LCP Max is on its way and I should be able to pick it up from my FFL on Tuesday. I'm planning a mouse gun range trip but now will wait until the LCP Max arrives. Thanks for the video ☺️.

Definitely interesting

Hm, yes... bloop, bloop boop, indeed.

Pretty sure those are hollywood blanks. I do know, for automatics - they shave down the locking lugs / mechanisms and replace the recoil springs with weaker springs so they weapons function. Essentially making all of them weak, direct blowback pistols / rifles.

Excellent video. Straight to the point and good demonstrations.

Little bit interesting ...

Now dark rooms vision ghosting blury glare?

That is still way to high Do I have to spend the money on an LTT to get it right?

I put a Timney trigger on my 452 American, the best 120 bucks I ever spent on a 22 rim fire. I put Warn mounts made supposedly for 3/8 or 11mm rails and they worked great. They’re a little hard to work with but; very good quality.

Subscribed just for the name of the channel...got a kick out of it. Good video.

I would say as someone that’s not sure if the firearm can handle a load of I would at least recommend warring safety glasses at least

My 75th anniversary LCP Max shoots almost dead center about first size. I am the limiting factor and need more range time. For the price point $279. Stainless micro, there is nothing equal for the price, that I could find. Thank you for sharing your experience. I have researched many forums. Some say they sent theirs in for service and it came back shooting correctly.

Your new sights won't work on bodyguard 2.0

Great video .. thanks

heytt brother great review gonna run it on my 8 inch 308 the votatu is the winner for me !