Видео

Welcome!

Prefer to drain the old coolant first. But either way shouldn't hurt, just make sure you get it all out before adding new coolant.

Not sure about that, are you talking about Bobber or some other trim. My knowledge is that there is no chance in the models until the latest 2024/2025 version.

I have heard of it before, take a look at the glass cover, some of the stock glass has a small dot/indentation on the bottom to identify the orientation. You can file or cut the grill in that area so that raised indentation on the glass cover sits on it completely. That little cut in the edge of the grill won't be visible after installation, but it will allow the light to go back into the housing. I hope you will get what I am trying to say.. do let me know if that works out.

Thankfully not! It was actually a nice relaxed ride with some friends!

You too!

It will. Just be mindful of the polarity of the connector.

Thanks brother!

Thanks for the comment! Great idea! I didn't need it but good to know! :)

Well if it ever stops working, you probably popped the fuse. Theres a little fuse box behind the (iirc) right fairing. If it happens, just replace it with a 5 amp one :)

Yes, that can also be done.. it just agitates the sediments and build up, just make sure you flush it out and then move to adding the new coolant

You are right, I get about 20 additional miles with it.

I think 4 is plenty enough. I did see some foaming on mine too, but that's normal. I saw that on my Sonata as well, I didn't use the cleanser on sonata, and still had some foams when the fluid was drained/flushed

@drifter-indian1448 Haha my paranoia made me do it 7 times. Over kill but it has very little foam at the end . Thanks for the video . Super helpful.

Thank you! Good luck to you too! Ride safe!

I did, but later ended up changing the whole look to Eagle lights! I think this was the bulb that worked for DRL iBrightstar Newest 9-30V Super Bright Low Power 3157 4157 3057 3156 LED Bulbs with Projector Replacement for Back Up Reverse Lights and Tail Brake Parking Lights, Xenon White a.co/d/dlmyUdS

You are welcome!

You are welcome!

You are welcome!

You are welcome!

Not sure what language this is!

@@drifter-indian1448 il cinese!!!!!

Sure, look up Alchemy parts on google here is the link to their website and product us-alchemyparts.glopalstore.com/5-75-inch-black-prison-grill-metal-headlight-cover-for-scrambler-brat-motorbike/

@drifter-indian1448 Thank you so much

Ofcourse!

Thank you! Good luck with the mods!

Thank you very much!! Happy to hear you found it helpful! Good luck and ride safe!

Thank you!!

Makes sense! In my opinion Idian is doing it to make the Rogue more appealing. The Rogue comes with all black header and pipes, I think they wanna prioritize on that vs keeping on the regular bobber. Also, they likely know 90% of the Bobber riders end-up replacing the pipes with something else, seat and pipes are the first things to go..

It's a generic Fog lights/spot light from Amazon, mounted on the radiator housing using a bracket which is bolted on to the hole where Crash bars/engine guards go. For windshield I have the generic National Cycle smoke black windshield. This is removable and very effective. Check my channel for detailed vid on the windshield.

Thank you very much

Hehehehehe, sounds good 👍🏻

Thanks! Yes, the long bolt made it a breeze and ensured everything stayed in place as it should. I had exact worry but it worked out well. Taks was intimidating at first but it was actually quite straight forward and easy after I started working on it.

Not yet, but did buy one, planning to install it in the next couple weeks. Waiting for a good weekend to spend some time working on it.

Thanks. It is a great bike indeed!

I didn't find any, but i am.sure there are other manufacturers who may have a chrome one. Just FYI- this thing stopped working after about a year of use. No sound.

You are welcome!

Thanks for stopping by my channel! And yes, you are right the cigarette lighter to usb chargers will work just fine, i preferred it this way to save that port for other things like heated jackets n all. Also, the vibration causes the charger to slide out and lose contact..

@@drifter-indian1448 Thanks for replying so quick. Will think about it twice, thank you for the advice

@StefanSandberg-wg2bu happy to help! Do give it some consideration. If you find a good piece it might be okay, but most that i tried (usually a few bucks from Amazon) don't fit tight enough to stay connected due to vibration, and I had to keep pushing it in after every 10 mins or so.. find it annoying.

Yeah, chrome doesn't go well wit black bike. Ride safe!!

Thanks! I didn't have the service manuals, so had to rely on other sources. Was cautious not to strip them. Worked out well for me.

Thanks! Yes, you can use the second connector to add the crash bar LED light, however, the stock fuse on these connectors are rated for 2AMP, you will have to change that fuse to 5amp or find a light which is rated for 2amp power draw.

It's certainly intimidating at first, but a fairly easy process, just need some patience and time.

I don't think that's the case anymore. It was mostly during the early to mid 2022. When the pandemic hit they had a shortage of black exhausts and they started accumulating backlog, after a couple of months delaying the shipments they started delivering the bike with chrome exhaust, when the customers complained they just gave them a coupon to buy a new black exhaust at a later date, that coupon was valid for buying anything from Indian stores.

Thanks ✌️

Tnx

I did record it but haven't loaded. Will look for the vid and try to edit and load it up soon. Thanks for stopping by and subscribing to the channel. Appreciate it!

Perfect! 👍🏻

Thanks!

Totally agree with you. Bike in itself is awesome for its original purpose! Good decision on getting the Dark horse, love that bike, it looks good too 👍🏻 Hope you still have your Bobber! Thanks for sharing your opinion.

@@drifter-indian1448 will be buying another Bobber this year, gathering the necessary parts first, seat, saddle bag(indian) rear suspension. all parts are sourced from Facebook market place so used parts, to make it to my specs. i learned from my 2019 bobber what I need for this bike. mine was black matte looks great but hard to keep it that way so I'm going with black metallic easy color to match if the rock chips get to be too much.

LOL... I agree, 5k is a good time to get it changed. My rule is once a year and I usually have about 5-6k mile of riding in a year, so it works out well for me.

Thanks Brother!!! Love your bike too ;)

That is what Indian recommends. Forst one at 500 miles as part of break-in service and then subsequent ones at every 10k. However, my practice is to do it every year. i usually get about 5-6k miles in a year. In my experience the oil at 6k miles looked bad, and as time goes it loses it's viscosity as well.. i will suggest you change at least around 7-8k miles, if can't do every year.

@@drifter-indian1448​​⁠got you, so it really depends how much mileage you ride. Thanks bro!!