- Видео 22
- Просмотров 186 576
Cambs shooting
Великобритания
Добавлен 8 апр 2006
Videos to share basic knowledge about maintenance of firearms in the UK. Mostly covering topics I've struggled to find a single resource for elsewhere and that would have been helpful for me when I started owning/maintaining firearms.
Also on Instagram @cambsshooting.
Also on Instagram @cambsshooting.
Crossman DPMS Co2 BB comparison to REAL AR15
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms.
This video is to take an in-depth look at the Crossman DPMS SBR, co2 BB rifle and compare where it matches a real AR15 - in this case the UK Schmeisser SP15.
Couple of quick clarifications that I missed, the pistol grip is standard and can be swapped and so is the dust cover. Removing the bolt catch is also the same process as a standard AR15 (but not the same p...
This video is to take an in-depth look at the Crossman DPMS SBR, co2 BB rifle and compare where it matches a real AR15 - in this case the UK Schmeisser SP15.
Couple of quick clarifications that I missed, the pistol grip is standard and can be swapped and so is the dust cover. Removing the bolt catch is also the same process as a standard AR15 (but not the same p...
Просмотров: 746
Видео
UK .22 AR15 Bolt Catches - catch22, Kriss Defiance, Mil spec, Lantac
Просмотров 2 тыс.Год назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. My argument for the best AR15 .22 bolt catch to give you reliab...
Lee Enfield SMLE safety assembly
Просмотров 1,8 тыс.Год назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. Lee Enfield SMLE safety disassembly and reassembly.
Kriss Defiance LVOA handguard change
Просмотров 1,1 тыс.Год назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. Kriss Defiance LVOA handguard change to Midwest Industries quad...
Lee Enfield SMLE MkIII* 1917 disassembly
Просмотров 23 тыс.Год назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. Lee Enfield SMLE MkIII* 1917 disassembly
Replace AR15 bolt catch LANTAC LA-SF15
Просмотров 214Год назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. Replace AR15 bolt catch.
Remove / install Mil-spec AR15 trigger LANTAC LA-SF15
Просмотров 901Год назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. Remove / install Mil-spec AR15 trigger LANTAC LA-SF15
Henry Big Boy Underlever .44 magnum reassembly
Просмотров 8 тыс.Год назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. How to reassemble your Henry Big Boy Underlever .44 magnum.
Henry Big Boy Underlever .44 magnum disassembly
Просмотров 17 тыс.Год назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. How to disassemble your Henry Big Boy Underlever .44 magnum.
Lee-Enfield SMLE III* D shaped cocking bolt strip
Просмотров 1,1 тыс.2 года назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. A brief description of how to disassemble the bolt of an SMLE w...
LANTAC LA-SF15 .22LR UK
Просмотров 4,3 тыс.2 года назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. Overview of the LANTAC LA-SF15 UK .22LR model.
Swedish Mauser M38 reassembly - short - ASMR (play 2x speed)
Просмотров 80 тыс.2 года назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. A short video on reassembling the Swedish Mauser M38. Model, 6....
Swedish Mauser M38 disassembly - short - ASMR (play 2x speed)
Просмотров 3,3 тыс.2 года назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. A field strip down of a Swedish Mauser M38 for cleaning. Model,...
Remington 1100 shotgun disassembly - short - ASMR (play 2x speed)
Просмотров 9 тыс.2 года назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. A short reference guide to stripping down the Remington 1100 sh...
Winchester Pattern 14 .303 "American Enfield" reassembly - short ASMR (play 2x speed)
Просмотров 8092 года назад
The purpose of my videos is to provide information to SGC and FAC shooters which is otherwise difficult to find in the UK market. The information I share is intended to inform and support members of our community to research certain products and encourage good maintenance practices to ensure safety and longevity for their firearms. Short video detailing the reassembly of a Pattern 14 rifle ("Am...
Winchester Pattern 14 .303 "American Enfield" disassembly - short - ASMR (play 2x speed)
Просмотров 1,9 тыс.2 года назад
Winchester Pattern 14 .303 "American Enfield" disassembly - short - ASMR (play 2x speed)
Remington 1100 shotgun reassembly - short - ASMR (play 2x speed)
Просмотров 2,9 тыс.2 года назад
Remington 1100 shotgun reassembly - short - ASMR (play 2x speed)
Swedish Mauser M38 Carl Gustafs full disassembly
Просмотров 20 тыс.2 года назад
Swedish Mauser M38 Carl Gustafs full disassembly
WW1 British Pattern 14 (P14) .303 rifle - full detail strip and reassembly
Просмотров 4,1 тыс.2 года назад
WW1 British Pattern 14 (P14) .303 rifle - full detail strip and reassembly
Kriss Defiance lower receiver detail strip UK
Просмотров 8762 года назад
Kriss Defiance lower receiver detail strip UK
Kriss Defiance upper receiver detail strip UK Inc. CMMG 22 dust cover
Просмотров 1,1 тыс.2 года назад
Kriss Defiance upper receiver detail strip UK Inc. CMMG 22 dust cover
Kriss Defiance .22LR AR15 what's Milspec?
Просмотров 3 тыс.2 года назад
Kriss Defiance .22LR AR15 what's Milspec?
Quick question. How can I remove the little pin thats in the original LVOA S handguard with the little block to let the gas tube through?
This was very helpful, thank you.
iv actually polished the stainless bolt slider on mine and noticed how much smoother it runs. From the factory its relatively rough and full of machining marks.
Awesome video. Glad you also mentioned potential issues that you personally faced, makes it alot more calming knowing issues that could happen
nice👍👍
Hi, I have a question is it possible to change the trigger group with an ar15 5.56 model ex..zev technologie ..Or other thank U
Most ar15 platforms will have interchangeable trigger groups. I'm not familiar with the one you've mentioned though. Best to check with the manufacturer. Sorry I can't give a more thorough response!
@@jabbott376 ok thankU for your response the weapon concerned is a kriss dmk22c arca I know that the barrel is replaceable by the Ruger 10/22 16" barrels but I have doubts about the trigger block....Thank you for your videos
Bottom stock does not remove, enter panic mode
Do you know if a Kriss Bolt is compatible with the Tippmann arms M4-22?
I assume not. The kriss bolt is self contained, whereas I believe the Tippmann runs on a buffer system. Based on those differences. I would assume that the barrel adaptor wouldn't be compatible. Also the Kriss has a bespoke adaptor that makes it compatible with 10-22 barrels, which I don't think the Tippmann does? Sorry, not the most informed answer.
Regarding the 21 inside the wooden parts, my guess is these parts were hand fitted and those were just assembly numbers used during the manufacture process.
What are the book names please, I can"t quite make them out. And ISBN #'s would be great. cheers
I can't quite remember what I said but I'm assuming it's for identifying marks etc, so there is "The Broad Arrow mk2" by Ian Skennerton and you can buy the old army armourer's booklet for the rifle too.
Thank You
I have two of them. One was a Swedish rifle team. Came from the armory with the front globe and the rear peep adjustable for windage and elevation. Curly beautiful wood. Riffing is like a mirror.
How do I get a real ar in UK
Is your SBR full auto
What real parts fit
Do the 1100 have a shap edge in the receiver
Yes there are a couple of straight edges in a few places
Thanks for showing. Love the Lee Enfields for their place as one of _the_ legendary rifles in small arms history. But, owning and having taken apart Mauser 98s and Mosin Nagants (with my eye currently on an Ishapore 2A1), I can't help but to think how utterly British the SMLE is, in a most charming way: An intricate amalgamation of supposedly thrown-together parts - a lot of which seem like an afterthought - giving the rifle a highly developed industrial appearance, but styled by the clinging to old traditions. It manages to make it look strong and elegant, while also nedlessy overcomplicating things. And the fact that this is the already simplified Mk. III* is nothing short of outrageous. In comparison to some other designs, it's so boderline ridiculous that there's no way around liking it. 😁
Bolt bounce
Excellent little video, was having a heck of a time with the orientation. Thanks for doing this! Is yours a Enfield produced rifle or BSA?
Great video . Having terrible trouble with mine, figure I'm going to have to strip the bolt down. When I load a mag and drop the bolt, the first round doesn't go all the way into the chamber , it hangs up halfway . So I have to pull the bolt back and help it ... when i fire the first round it then cycles fine ... any clues ? Be much appreciated . Thanks
What magazines are you using? Is everything in the gun factory spec?
Kriss mags .. I have 3 ... yes its all factory spec...
@@marklythgoe7031 I've found that 15-22 magazines always worked perfectly (until the feed lips wear out) whereas I've always had niggles with the Kriss magazines. Might be worth trying some 15-22 mags and see if you encounter the same issue?
Thanks Buddy I'll try some ... a mate has some I can borrow 👍
Thank you. You may in fact be a God
😂😂 just a man with a novice working knowledge of his firearms! But sharing that knowledge is a genuine pleasure.
Thanks for your guidance. It truly was a big relief to get it done.
Hi, I have from my late father, what seems to be a souvenir of his time in the South African army while stationed in German West Africa (now Namibia) during World War 1. I believe it is from a Lee Enfield rifle. I have 2 photographs which I am unable to attach.
I just recently purchased a 1917 BSA manufactured SMLE. It’s a beautiful piece of equipment and it shoots quite well. Thoroughly impressed with it.
Are you still looking for spare Original firing pins? I have some
Thanks for the heads up. Unfortunately I sold the rifle (with much regret now).
Wow... sorry to hear
Mine is a generation Older and YEARS since I have tore it down 100% Thanks forthe Tune Up! She is On the Bench Now! I was thinking about salts bluing her and re work her wood, But "I Think!" Just a Good OLD FASHIONED CLEANING on the gun parts with some good ole TLC on her Wood! I love History to much to change her.
who is the other rifle company you didnt like? ci ?
Can i take off the handguard without having to disassemble the rest of the gun?
Yes, you can. Remove the magazine tube (not the housing). Remove the barrel band, which you should be able to angle over the front sight with the magazine tube removed - are you can leave it hanging. Then push the handguard forward and it should slide off.
Well done tutorial, helped me out on a few spots where I got tripped up. Thank you for your time and effort
Upper Only สามารถใน AR-15 ได้หรือไม่? ความแข็งแรงเท่ากันไหม?
อัพเปอร์ รีซีฟเวอร์ สามารถใส่Ar15ได้หรือไม่? ความแข็งแรงเท่ากันไหม?
what's your forend
It's a Midwest industries t series quad rail.
You ever here of having to pull back on the firing pin assembly about .05 in order to get the safety to engage, it’s always stuck in the firing position. 1943 M38
Mine would go into safe, but if I wanted to throw it 180 to lock the bolt into position, I'd have to pull on the cocking piece just as you said. Seemingly the only poorly designed part on the whole gun! I did wonder whether it was down to the cocking piece being Husqvarna and the bolt body being Gustafs (I can't remember exactly which bit was which and no longer have this rifle to check).
I'm in the market for a SMLE n1 mk3. Where did you find yours? looks beautiful.
Kirk at byswordandmusket. His stock is always good quality!
@@jabbott376 I appreciate it, thank you
Thanks for the video man! Big help
Excellent video, thanks
Have you tried the ready mag adapter ?
Is that the same as the better mag adaptor? I've seen those in person. I've seen them work fine and I've seen them cause problems. It's another, unsecure, addition into your gun that can interfere with the bolt carrier. My inner fudd brain isn't a fan of that principle (but I bet the majority work just fine!).
@jabbott376 Yes, the better mag , thank you.
@jabbott376 been looking into my options to regain all functionality. Great video 👍
Thank you for a very clear and precise video. Nice job!
Thank you for a very clear and precise video. Nice job!
What a great descriptive video and very valuable information, thank you very much 👍
I work in a Fabrication Shop as a CNC Programmer/Operator. There is not much I can not make.
I have a 1912 version. Which is my go to Guy for putting food in the Freezer.
Absolutely Gorgeous!
A great video, but that is a M96/38. I own a M38, and they were made between 1938 and 1944 by Husqvarna and were made with a bent bolt handle. Carl Gustav rearsenaled the best M96 to the new M38 pattern
You are correct!
The rear sight protector is on backwards, the middle interior barrel band is missing a spring, its missing a tubular washer forward of the magazine in the lower.
There's always something you miss when trying to prep for a video. Daft thing is, i read up on rear sight orientation 😂.
Great video. I have the same rifle but in .357. After 12 months of fault free shooting it has started playing up. Looks like its trying to push the round into the chamber at an angle. The rear of the bullet isn't fully engaged with the front of the bolt. Have taken it back to the dealer with a view to selling but I kind of miss it so will be handy to now know how to dismantle and re assemble.
Can I ask whether the Kriss defiance catch is the standard catch with the rifle? I’m thinking about picking up a milspec .22 lr that replicates the rifle I use abroad. Is there an out the box rifle that achieves the last round bolt catch?
Only the Kriss. You can use their bolt catch in other milspec lowers with the 15-22 mag and you will get last round hold open. The catch-22 ones that come with lantac barely work. You can also install a better mag adaptor, but they're not cheap. If you want one in the UK, have a word with Xtremetactical, he might be able to get one shipped over (sadly Kriss don't ship to UK). Note, the 15-22 does have last round bolt hold open, but it's not milspec, so it depends what else you're hoping to add to the rifle.
@@jabbott376 interesting, cheers for the reply. Enjoyed the video!
@@jabbott376😊😊
Just bought one of these. will be saving this for strip and rebuild. thanks!
Did you take this rifle apart to this level to clean the cosmoline? I just bought one and was thinking of moving all metal pieces over to a tub of cosmoline but I didnt want the wood there with it.
How would it do against black Bear or Grizzle