Видео

@@Architec7 thanks for watching As to your question verify on the TrueNAS to see if there is no errors logs that might pinpoint your issue The other thing I would check is if host network is check ✅ on the Tailscale setup in TrueNAS Hope this resolved your issue 😁

@@JeffComputerService Thank you for advice, maybe I am on it... I didnt think, that you need to have install on your pc Tailscale app as sort off VPN service. Am I right?

@@Architec7 yes exactly the computer or device that you want to use they need to be connected to tailscale app installed on your PC

@@aronpalfi7386 the Devices that you connected to the tailnet (Tailscale) are they able to log in And also did you check the service is running on TrueNAS sometimes there might be a error log indicating what wrong You can also try to Ping the IP if you get a reply then you should be able to connect to it Hope this helps your issue

​@@JeffComputerService When I tried to ping it, I got this result: 3 packets transmitted, 0 received, 100% packet loss, time 2048ms The server shows that the service works without any problems. But thank you for your quick reply.

Yeah I can do an updated video of this topic it's gonna take me time but once I make a new I'll reply to this comment again for everyone to see

@@hometownmedic7355 thanks you for that info I will keep that in mind for future videos Thanks for Watching 😁

@@guilmm I checked ✅ it because if you have it off you will not be able to access your server via remote

@@PepeakaGamer hello again was you successful in opening the plex server via Local IP not (tailscale) to set it up? I don't have Plex pass but I think that is just for more features depending on everyone's needs

Did you added the port number of your server to see if you can access it locally?

I have the same problem. On my phone in the browser i can access Plex over Tailscale ip. When i try it in app with manual ip, i says it can’t find a server

@@bjornj606 HI! thanks for watching On the app double check to see if you have enabled in the app go to settings> then Advanced make your you have enabled to (Always) on Allow insecure connections having this turned on will allow the server to be available on the app using Tailscale I hope this helps your issue 😁

Thanks for watching due to your issue First off Was you successful in adding the devices to the tailscale (tailnet) Was you able to log in locally on the Plex server ?

Is there a way when the computer boots up, it wion't require me log in in the ProxMox terminal? Thanks

Thanks for watching!! To your question i am not really sure about that but i do know after some time passes your log in timeout due to security so don't recommend that

Thanks for watching and Subbing! as to your question if you have your plex server on your mac mini and you are traveling the best way i would do this is by just installing tailscale on your mac mini and on your phone that way both devices will be connected to the same network using tailnet (tailscale) and all you need to do to access is, is by putting the tailscale ip given to your Mac Mini with the plex server Port Number I Hope this helps your issue tailscale.com/download/mac www.plex.tv/media-server-downloads/?cat=computer&plat=macos#plex-media-server

Hi there ! about those speeds i am not sure if tailscale has some download speed limits you can check on there website i myself i am not sure

Hello there, i am not sure if this will resolve your issue but i had a similar issue that i could not log in using the ip provided via tailscale what helped me resolve this was first doing a backup of my TrueNAS Scale and install it again from 0% once that is done and adding the tailscale app again and making a new Auth Key i was able log in with no issues with the tailscale ip i Hope this helps :)

Zerotier is very similar to tailscale I personally prefer tailscale due to how simple it is to configure it

@@JeffComputerService I was just about to start with tailscale thanks for the help 😇

Was you successful in adding the devices to the tailnet of tailscale?

@@JeffComputerService yea I’m able to now but not able to access plex which is hosted in true nas , could you please help here ?

Hi! Thanks for watching!!! I'll try to make a video about this later on I'll reply to you again with a link once I make it

@@JeffComputerService thanks a ton!

I have been using tailscale for a very long time and so far it has work very well and I have never had a security issues with it

Hi there, were you successful in adding the devices to the tailnet (tailscale)?

@@JeffComputerService Some devices are incapable of being added, so it wouldn't be a very good solution for tvs or any device that can't use the tailscale app natively which is a good majority of how a lot of people use jellyfin.

Go for it 😁

@@esimms999 Hi Thanks for watching 😁 No it shouldn't and Yes that's true it does say to leave it off recommended but if you leave it uncheck you will not be able to access your server via VPN using tailscale Only local Access i don't think it should cause any trouble unless you have a specific reason

@@musichubch this happened to me once I put the Access control to public I changed it to private and it didn't happen again but the address would stay there what I would do is delete the IP it got I think it's a bug from the program I am not sure Hope this helps

You need to persist /var/lib/zerotier-something (Check inside the container the correct path)

Hi! I would verify first and check to see if both devices are connected to the tailnet (tailscale) if you try to connect a device not in the tailscale network it won't find it If anything check the PC or virtual machine you connected in the tailscale and in the (Machine Tab find the Machine then scroll down to the bottom until you find (Service (Alpha)) Tab if the process was successful you should see the IP of (tailscale) with a Port number of the Plex Server in your case I hope this information helps 😁

@@bnika33 that's great thanks for watching 😁 I can't quite remember 😅😂

@@JeffComputerService Hey there :D Really, thank you for this superduper video! Also I am working with ZeroTier so your videos are really helpful, glad I found your channel you have my sub :)))

Hi! Well I do have a Raspberry Pi 4 running jellyfin and Plex media server not in (TrueNAS) at the same time to watch or do testing in my home lab not all my movies are 4k mostly 1080p but it handles it pretty good no issues so far in terms of streaming or running it

Thanks for watching! As to your question did you make the jellyfin Server on another computer or a virtual machine so that the resources for that server are not used and just mainly focus on the server that will improve quality Because having the server in your main computer that you us might cause problem but having it on a virtual machine might make it more stable at least that what I would recommend for stability and since you are gonna setup remote access that will also help with performance at least for me it works I do get sometimes buffering issues on my mobile network but I think that's due to where I am sometimes the connection is good or the opposite I hope this helps clarify your question 😁

Hi! thanks for watching as to your question is the device that you are trying to connect is it already added to the (tailnet) of your tailscale ? in the plex app go to Settings> Advanced and in there verify if you have enable (Allow insecure connections change that to (Always)) for your Media Server to appears via Tailscale another thing is the app sometimes gives me issues i Prefer to use a Browser to open the Server by just putting the ip provided by tailscale and port number Hope this helps resolved your issue :)

@@JeffComputerService Hi, thx for the answer. The app is working now for me. I had to turn of private dns in android. Seems like a common problem.

thanks for watching i dont have a cloudflare video on this topic but i do have this video on Tailscale ruclips.net/video/Tbdfc9cP-y4/видео.html

@@fouad_alshamyThanks for Watching 😁I am using Hyper-V Manager

Thanks for Watching !! As to your question do verify in your case you mention the Transmission app, in the Network Configuration part of the app make sure you have Checked ✔ (Host Network) having this enable allows the app to be accessible via the ip provide by tailscale for your TrueNAS and also put the port number the default port number is 30096 for Transmission i Hope this helps your issue P.S Not all app will work with just enabling (Host Network) at least for me it causes me issues i would recommend going into Tailscale select the (machine) you have for remote access and there is a part down below called (Services) in that Area you will see the IP address of the machine you selected and different port numbers this section is telling what port are already connected to that IP Address. P.S.S The issue that i have confronted is that the port number that uses a specific app does not appear in (Services) of tailscale in my case trying to connect would give you ERR_CONNECTION_REFUSED i am not sure how to fix this

@@JeffComputerService I really appreciate all that information! Thank you so much. I will give this a shot.

Thanks for watching 😁 And Sure once I do testing to see if it works on my side, I will reply again to your comment with the RUclips link

Here you go ruclips.net/video/5BRN1sfDS50/видео.html

Thanks for watching glad it worked out for you 😁

​​@@JeffComputerServiceI do have a quick question. I use the jellyfin client on my PC which connects to my NAS server for videos ( I do have a music library that is stored locally on the computer) upon connecting remotely I am only able to access the music library not tv or movies. Does this method only work if all media stored on the PC since my Nas is on a network of its own?

I actually don't know much on how to install it I might make another video on it more advanced with more details once I finish the guide Still thanks for watching 😁

Hi there thanks for watching as to your question at least for me remote access for nextcloud installed on TrueNAS scale didnt worked for me using the ZeroTier IP instead only worked with the LAN IP if anything ill try to make a video related to this for remote access in a different way not using truenas scale if i am able to see if it works ill need to do some testing if it works on my side once i do that i will put up a video and i will reply to your comment again thanks for watching

Thanks for watching 😁

Thanks for watching As to your question you can try and see if you can ping the IP address for a response(reply) If that does not work you can Create the Network again and add the devices again or restart your NAS and check to see if the Zerotier Service is running I hoped this Resolved your issue 😁

@@JeffComputerService Hello, I saw the whole video, it works fine. But when I restart the system thunder the service runs again and I can no longer connect, this since we need a persistent variable. Do you know anything about this?

@@luisnano1008 hello I am not sure about that I haven't had that issue before whenever I do that a issue the best thing that works for me is to disconnect the device from Zerotier add it again or delete the network create it again If I do get the same issue I will reply again with a solution beside what I have provided Hope this helps 🙂

@@JeffComputerService I'm having that problem right now, it works for me to configure it again but it's already a bit tedious. The idea is to configure only 1 time and that's it. I'll keep an eye out if you upload a solution with persistent variables. Greetings !!

@@luisnano1008 I would recommend you tailscale I do have a video on how to set it up it's very similar to Zerotier

...and what's the problem with that? for those who want a fast install of arch, archinstall is a good way of installing it, and the dude really wants to show us how to setup vbox with it, not installing arch linux .

​@@parsagpIt's a real shame that beginners don't appreciate the Arch Linux manual at first. The installation guide is basically a free and full-fledged course on Arch Linux. It teaches so many fundamental things about Linux and computers and is a big help if you encounter problems in the future.

​@@parsagp+efi is really a thing you want to enable in virtual box.

Thanks for watching sometimes for me the jellyfin login gets stuck and the user does not want to log in I would clear the cache or try a different browser seams to work

Thanks for watching 😁

@@JeffComputerService You got a subscriber! I was skeptical at first due to the lack of viewers, but your guide has been working flawlessly! You deserve more viewers!

@@micahdotjohnson thanks I appreciate that 😁

@@Jaero14. Thanks for watching 😁

Thanks for the visit

@@pollyvanderpoll7846 you are welcome Thanks for watching 😁

Thanks for watching! in your case to access the server remotely of jellyfin just put the ip address that Zerotier assigned to your Truenas follow by the Port Number if i am not mistaken the default port number is 8096 and be sure to verify on the jellyfin you installed on your truenas that you have checked Host Network to access the server

Thanks for watching! was you able to make a user on truenas scale and give it access to the SMB share you made with the username and password you created on the truenas scale ?

@@JeffComputerService Hi Jeff...yeah i've had truenas for about 5 months and can access the share locally from another PC as i've network mapped the location, using your method I am able to access the truenas log in page from a remote location with no difficulty and can navigate around the truenas server i.e apps, dashboard, and even install new apps...i'm not not able to access the share folder

Hello there, thank you for coming to my attention with this problem I'll need to verify on my side if I have this issue if not then I'll try to recreate the problem and provide you with a solution I will reply to you again as soon as possible with a solution for this and thank you for watching 😁

Hello again i made a few testing with the SMB shares and was able to access it on my side i made a few testing with a phone and a computer used a hotspot to connect to a difference network connected the different computer and phone to the tailnet both of then successfully was able to access the Truenas Scale Server for the Tailscale Configuration everything is the same the only thing i need to enable is the Bind Network to access the server after that i decided to make a new folder for my user in the truenas scale and made it accessible for that specific user i also restared the SMB Share Service to see if any issues was given sadly i did not get the issue that failed to connect to the SMB Share but stopping the service and restarted work again like normal i also made a new datasheet for it to see if it causes me any issues so far i have been able to connect with no issues to the SMB Share over the provided ip via tailscale nothing else in my part has been change for the SMB Share Creation i did ADD choose the folder then Create Datasheet in the Purpose area stayed the same Default Share parameters nothing else was modified everything else remained default i Hope this helped in any way possible