Видео

Yes, false alarms are a great experience. Many jurisdictions will send you a bill. If a door was open the contact sensor on the door should have triggered so that explanation made no sense. The motion sensors aren’t nearly as good as the doorbell cams so you need to contact sensor all of your entry doors. Motion sensors either don’t go off or they can detect your AC coming on and bllowing some paper around. And how do the police get in if you’re not home and all the doors are locked? Also note that in some cities “verification” is required before police will come, so you need cameras in the house to see someone in there before calling. So the “Pro Monitoring” isn’t very useful in such places unless your out of the country or can’t get alerts. Nobody ever mentions that the ring doorbells don’t integrate with the alarm. The doorbell CANNOT trigger an alarm. You can trigger the doorbell to start recording, but you can’t use the superior motion detection for outdoor security. Which is really stupid and makes no sense. And please dont say "Alexa Show Front Door" in a video because whoever is watching will have their front door show up on their TV as mine did.

You’re so nervous when you do this project. I just muted 🔇 and watched it

Why doesn't someone just invent a dryer vent that is hinged so you have access to the dryer to clean it out???

Thank you so much for this!

You are amazing…..most people would have quit after the cleaning kit broke!…….good for you….👍🇨🇦

are you still happy with this pressure washer? Have you been using it since this video? Thanks!

Great job! Looking for ideas to create a similar solution.

I have a different Makita, but mine works the same way. I lost the Manual years ago. Great video.

And after all that along comes a breeze and blows it all back

This might be crazy but I was scrolling youtube and saw my truck! I bought the truck in this video a year or two ago from someone in Tampa!!! So wild to see it just scrolling the internet at random. As for an update on the old girl, she had a name change. Her name is Mable. Im swipping in a bored out 7.2L 400m into it. Built to make around like 400-500hp. As well as putting in a C6 trans till i can swap it to a T5 or T6. I put new 15" American racing wheels on it with some 33x12.5 A/T tires on it.

This is the best pergola video I've seen on RUclips. Thank you so much! It looks gorgeous!

Want to raise one myself. So amazing to see the caterpillar changes into a butterfly 🐛🐛🦋🦋

We've got the same screen and I ended up adding grommets to the bottom and sides to secure it better when hanging between two trees so it doesn't blow around with wind. Worked perfectly and learned adding grommets isn't as hard as ide thought it would be. On the top I also cut little holes on either side in corners and pulled through a nylon rope with a saftey pin all the way through the top part where the grommets are and just scooted it around those to pull through all the way, that was the most brilliant idea I've had in a while cus it really helped this sorta cheaper type projector screen..oh wow that's funny yep our projector looks dang near identical...your speaker is though way better than what im using I just brought out my old wired pc speakers and connected those since there's two it sorta works like surround sound lol. Also what helps so you can play a video right at dusk, is setting the screen up inside a canopy with one side taken down to view through, it makes it so the screen is in almost total darkness and way more visible a more earlier movie kid time, lol, so us adults can still have our evenings to ourselves,lol...selfish Mom me I guess idk lol.

Love to see women doing man work👍

After I drained mine, the water won’t flow when I started my load, Any advice? Thanks

Super helpful review. Def getting one. Thank you.

You know what? Not alot of women would go up to roof like that. So I'm proof you for going up there. 2nd you tried and that's exactly what you need to do is try and do things your self and that's how you learn how to do things. You learn as you go. Thank you for the video I'll give it a 👍

Podría decirme cómo hago que aspire el cloro porque el mio no lo hace

I just clean mine from inside the house, and vacuum as lint falls down. I only went to the roof to make sure that the brush reached the top of the vent, and that the flap is clean.

Props to you for DIYing and learning from your mistakes! Thanks for sharing your struggles and successes.

My guy charges 100 bucks. Its maintenance like AC but probably like every 2 years. My appliance guy came out because my dryer would not heat. He took it apart and the heating coil bracket had gotten so hot it snapped in half. He came off the rook with something that looked like a birds nest. He called a guy to clean it for 100 bucks. So much more safe sister. I am older and I am soooo happy you pit this up. Mine is fine but I wanna clean it and save the 100 bucks. I say people saying to go from the inside. So, your video probably saved my life. I am also a woman. Good job with this thing. Sure helped me.

Did the roof leak after?

I am interested in buying an old truck, and im looking to save money by fixing anything I can myself. This really helped! Are you enjoying driving an older truck?

Your video is better than the Makita manual 😂

Impressive detailed review this is how you do a review thanks helps my decision to buy it.

It’s unfortunate the original installer didn’t use cement board or some wet-rated barrier because this is often why tiles crack due to the expansion/contraction of soft surfaces like drywall. My installer years ago did the same thing and an entire row of tiles cracked down the middle. When I removed them, the drywall behind was in pretty bad shape letting moisture behind the tiles, which inevitably froze in the Chicago winters putting pressure on the tiles.

Absolute star you are! Thanks so much. Very well explained😊

I tried cleaning my vent with the same tool. Got all I could from down below with no success of completing. Called a professional to complete the rest because I'm not getting on the roof.

Very helpful video. Best one I could find for my Makita. Thank you!

Great video. As others have pointed out, just make sure that when you put the new filter, the flow arrow is pointing in the right direction. I am not even sure if you installed yours correctly.

Awesome. It made the sidewalk look new again. Very nice!😎

Carbide blade would probably work better than saw blade for grout removal… and save the saw blade

Nice

I know this is an old video but thought I’d still ask. If I wanted the entire wall smooth (above your beautiful job) can I add the plywood every where on walls or would that look odd? You’re the only video I’ve seen where the entire room is done, just what I wanted to see. Thanks, great video! Oh and do you think how you did this, do you like it or do your eyes go to the textured areas? Thanks again

This is great... No videos which make any sense, but your's is pretty darned idiot proof. Thanks :)

Thank you

Should have taken vent apart in attic to get stuck brush . Not tear your roof apart.

Boring. Get to the point.

Gross! You need to clean your filter waaaaay more often! I'm sure your machines are needing a deep cleaning too. Do it before you have to shovel out another 5 g's😢

ruclips.net/video/9UbwACGo6-k/видео.html i have the same colr 77 super cab made me smile

Where did you get that A frame console table from? (to the right of the door)😍 I know this was years ago but if you can remember lol.🫶

intense ass music hahaha

Thank you so much! I've been struggling with a sticking chord line for a year since I replaced my spool and couldn't find a demo anywhere!

"It's not very loud" is incorrect. I've had 3 of these things, all sounded the same, all pretty loud when activated and you'll be yelling at anyone to talk while you spray.

Thank you, this helped so much. My Mom clogged up the filter with a rubber backed bath rug. What a mess! The instruction manuel led me to RUclips and a search for debris filter led me to your video. Simple and easy to follow.

Did you have any leaks? At least you were not afraid to get up on the roof and try DYI, kudos.

Drop a weight in it or put some kind of liquid in a bottle with a string around it

Did you put any type of cleaning solution in or just plain water?

Appreciate the video! Helped me 🙌

Thank you for demonstrating the perils of DIY for this type of project. I wanted to clean my roof vent from below, but I was worried that the brush might get stuck--so I checked RUclips. Wow!, I don't need more stress in my life. I'll just call around for a good price for a professional, and then "watch to see how HE/SHE does it" in order to determine if this something I can tackle myself the next time around. Everyone appreciates your fortitude and candor in documenting your experience. It's been very helpful to so many. Kudos!