Видео

Is it possible to record stereo to a mobile device for videos or live streams?

All your precise instructions/advices would be made in a hour video of typical RUclipsrs. There are few guys like you who know how to present stuff. Thank you!!

Which is better in live band quick setting or complete setting?

Have you found any solution to export the tracks on Logic? Is my only DAW right now

Terrible tutorial it's just too slow

I just got this mixer. Man you guys sound good. Keep up the good work! 🎉

Wow great work Sir. I am using same mixer and shure mic sm58 to preach. Can you show me how to add presence to my preaching mic. I am using vocal preset but it doesn’t sound full Sir. Your help is appreciated 🙏

Okay the music is soo good and editing 😍 ❤

❤

Your voices go so well together 😍ive been blessed

I have one more question, if you used it to record into daw with usb-b, to hear what you had recorded you cannot set only channels like 19,20 as usb and all the channels to be routed there and for mixing to use the mixer inside the daw ?

“I’ll beeEEEeee fine” 7:15

First, Gimme dat pinned comment😆

thanks for the tutorial! I run into some issues while recording though. I tried recording a few vocals and guitar on an SD Card. The recording sounds good when I play it back on the mixer. But once I load it up in Logic the tracks are super quiet in volume and without FX (I've set the recording to Post AMM). Any idea how to fix this?

Is it possible to use this mixer as a standalone DAW? I recorded a track on my 18t, and can play them back fine. When I arm it to record on another track, I cannot hear the previously recorded track.

Ordered mine yesterday !

Hello dear. I am about to buy one for my band, for our live performances. If i want to playback multitrack (around 8 stereo files) without using DAW, is it doable with this mixer? like i put them on an sd card or a usb card, and can i play multitrack? assign each track to faders and mix live on the fly? for example if u have 1-kick 2- rest of drums 3- bass 4- keys 5- vocals etc.... all prerecorded and on the top i want to add live instruments, and i want to mix the prerecorded tracks, for example the kick in track 1 is low, i wana use a fader to raise it, the vocal on track is is high, i wanna decrease its volume etc..... are such sorts of routings doable?

Great video! Is there any way to create custom banks so you can put certain channels next to each other in the processor without having to rearrange your input setup?

Does it have direct monitoring for tracking?

4:20 what kind of mics can phantom power damage? Dynamic? Because from what I’ve been told that won’t hurt dynamic mics.

Amazing video!! Really excited for the EP 🤩

I keep failing in love with Allen & Heath digital mixer Sir. You doing a great job please keep it up

Thank you for your helpful video, on SD card recording mode when you had armed all the tracks, do you had used class 10 sd card ?

I would love to know how to play files that were not recorded in the mixer into the mixer

Sehr schön erklärt. Danke!

This is extremely helpful man, thanks for taking the time to create this resource for people 🙏🏼🙏🏼 blessings man

Amazing 🎉

Do I need to save scenes before updating the firmware buddy ?

Thanks for the update, there is an option to play an external mp3 through the mixer to insert from the computer, thanks

Great video, thank you! When I change settings in an output via CQ4you, do I need to save those in the "big app" before turning the mixer off or does it save them automatically in the scene currently used?

Good afternoon 🌅

Allen & Heath CQ18T how many OHM headphones can you connect?

Excellent video! So much great information in a short amount of time. Well produced also. Kudos!

Really helpful. Only advice on this I could find on the internet!

You saved me a lot of time. Thank you.

Great video, you might want to mention that when setting up the connection between Logic and the CQ make sure the I/O Assignments in the audio setting in Logic is set for Output 1-2.

Oh yeah, forgot what about more options on the pickoff points for the aux mixes besides just pre and post fader? Unless the pre fader option is already pre channel dynamics/compression pickup point, adding option for that seems like an essential option to have. I don't want any channel compression applies to channels (that may be helpful for the FOH mix) coming through monitor mixes like wedges or iems as will mess with singers sense of their own dynamics, risk leading to straining or developing bad vocal habits and in wedges reduce gain before feedback available. Only compression ever use for monitor mixes we be at output level on such auxes in form of peak limiter set where it would should almost never engage unless was drastic unexpected jump in level where that limiter would provide protection for hearing and or the speakers. Of course for auxes used for other things for example, front fill mix, separate live stream mix i can see where may want to be able to have post dynamics pickup point and depending on application pre or post fader may be what would be used.

Mute groups, subgroups, and dca's would be my top one of the feature requests by far but the others i can see value in as well. A few other features, i wish the CQ series had 1) Low Pass Filters on channels without losing a band of parametric eq. 2) Option to change the slope of the hipass and low pass filters 3) Blend knob on the compressors 4) Key Filter for the gates to have better control on what will open the gates. * Even better but related, adding option to set gate to a mode that would be similar to the famous 5054 primary source enhancer or waves primary source expander. Could be so useful tool to have onboard for better reducing unwanted bleed in some channels. 5) Dynamic EQ: Even if it was just a few bands that could be inserted on some channels, on subgroups, and outputs(at least main LR mix). While at it, include blend knob on it as well. Option to side chain to another input channel wouldn't be bad idea either but even just simple few bands of dynamic eq available would be such helpful tool to have available for some things in certain situations.

Just fired up my CQ-18 for the first time, and trying to follow your video, but your tip on "saving the Factory Settings in multiple places" isn't working, because my new CQ-18 doesn't have any pre-set Scenes when I go to the "Scene" tab. Any idea why? I'm using the latest firmware v1.1.1 if that helps.

Hey Lucas, do you know if we can make mute grops with the CQ18T. I'd like to mute all my monitors and main out LR with one button. Greetings!

Thanks for the video but could you slow down, it was really hard to see what you were doing. Thanks

If I want to use the mixer as an USB Audio Interface, How many input can it capture via USB and how many outputs can it give ? Also, are the 6 1/4" mono outputs assignable or they have to be the master output ?

Hey Lucas! Have a question about the monitor boxes. Where can I adjust how loud each channel is on the mix of my monitors? Like I can adjust on the smarthone app. cant find it at the mixer. Secondly I wanted to ask if i can configurate a button to mute everything (main lr + all monitors) or 1 button for all monitors grettings!

Auto Feedback Correction is the worst thing ever created for live sound.

Hey Lucas, Could you help me with the answers to these questions? 1) Can I use hardware compressors or other outboard gears in anyway with this. 2) Can I play a minus one track via bluetooth or USB and record the band as well at the same time with all the tracks using multi track recording feature? 3) What are the other limitations to look out for in this mixer.. and is there any other gear that replaces this at this price point

Just realised the audio doesn't work for most of the stream... :( I forgot to turn up inputs 3&4 on the mixer, so that's why you can't hear what I was hearing...

Crossly - very interesting! What about going the other way - sending say 3 channels of audio from Logic to the CQ18-T for playback. Can those be set to mono channels above channel 18? And then, are those channels available to be routed to the different aux outs like any other channel of audio would be?

THANKS, simple and short done! So recording needs first to set all to "digital" and playing out to set all to analog again!!!?

SLOW DOWN

Hi thank you for sharing this really helpful. Can you share what cord/ wire called the one from your cq18 to your phone. I tried to find but I can’t. Thanks again