Видео

How's your has the mapper panned out?

Hey thanks a lot! 58 year old female changing oil on a 2009 Prado for first time and you make it so easy to follow. Cheers!

Can you do the coolant bypass with out the blanking plate and have no issues

How is this going todate? We are almost a decade on!

Let's learning

Good engine

The only video I've seen on the 'Tube' so far, that talks about, even 'shows' the obstruction (or lack of it) with regards to the rear view mirror. Also the comment with whacking your noggin is great stuff to hear too, and what holds the radio in etc, well done.

Don’t suppose you remember the size of board you need for base ?

Any tips for not makin a mess when removing oil filter? Terrible design

Where on a toyota vitz 2011 you find the egr valve?

I'm looking into getting the mapper, have you had any issue with the mapper after using the unit for this long?

Thanks for the vid, especially where you mentioned the lights not being able to turn off individually with the doors open. Got one second hand and noticed that issue and thought I had wired it up wrong

EGR, must, but must be taken off engine, with cooler and all pipes. Inlet manifold should be welded.

Mr. Winniliss .. not sure if you are still monitoring this post .. but if you are would you mind clarifying what you said at 4:23 .. "This vehicle ..??? is ??? to lift " and then at 4:29 ... "If you don't ??? ..." . I've tried playing back and listening many times but still can't make sense of what you are saying.. even the subtitles don't help. Thanks in advance.

Thats the bomb Love free horses

Nice work. 👍

which is the best coolant for corolla d4d 2004 ? what is the best way to replace the coolant to ensure no airlocks ?

You're about as exciting as monotone bum farts to a deaf child. Your level of excitement surely made your kids no longer want to go camping, like mine now. I hope you thrill your wife more so than you did your audience....

Hey mate, how did you get the back nut off the turbo dump pipe? I’ve got the top nut and the one closest to the wheel arch off, but can’t seem to get to the back nut with any combination of extenders etc

So I have the kit for my 150, 3 inch exhaust, snorkel, K&N intake filter and slightly bigger intercooler, running 285/60-18 and a 55mm lift. I am averaging 12.5L/100KM. I also have a bit of lag down low that I'm hoping this will relieve. I have the EGR safety kit and read out due to the high tunes available (Chip tuning stage 3 Dominator). What amount of loss of fuel economy did you get on setting 5? I have ~30 levels available. Was 5 the "off road only" setting? Anything above 15 is rated as "off road only", on mine. I am trying to get baseline from a true user prior to installing mine. Thx

Thanks for the video. Just 1 question tho..if you didnt use the mapper and got error codes would that be a big deal or does it actually interfere with the operation somehow? If its just a light bulb on the dash i can live with that

So it has been almost 2 and a half years running the EGR block, is it still running good?

Wow, amazing work! Looks fantastic!

yang berminat silahkan beli disini ...www.tokopedia.com/wandey/tutup-egr-innova-fortuner-hilux-diesel-2005-2015 -- Tutup EGR digunakan untuk memblok jalur gas buang yang dimasukan kembali ke ruang mesin lewat intake manifold. manfaat menutup EGR: - intake mesin tidak cepat kotor. - oli tidak cepat jenuh sehingga usia pakai lebih awet. - mencegah detonasi akibat penumpukan kerak karbon. - mengurangi asap buangan mengebul hitam di knalpot. - akselerasi awal meningkat. - sedikit menghemat konsumsi bahan bakar.

hey there mate! I have an arb fridge as well i just installed on the slide in the back of my jeep, I was wondering if you can give me any tips on how you did the cable carrier so the power cable to the fridge isnt all lose in the back. I ordered the cable tracks but i dont know how to get the cable in the tracks. any input would help. Awesome setup you have here! cheers!

What about changing the fuel filter between the tanks? Do you replace that more frequently?

Hi mate, what's the difference between the blanking plates with holes and the ones without?

Hey mate... Great desing.... I want to ask you where can I buy the flat plate u bought to pass the u bolt? And how it that call? Have you had to drill it to fit the u bolt?

Just about to do this mod to my 2014 Fortuner TRD Wagon, I will also do the PCV & DPF mod. Thanks for the info mate.

Im about to do this blanking. Intake manifold on my Toyota Hiace 3 litre turbo 2009 was really caked up. So is there any other way of getting past the error code with a full block? It looks pretty complicated what you've done there. If there was a7mm hole in the blank will this give it more power and economy still? I guess the slugs would still build up? cheers

hey mate,with the 3 wires that are already attached to new console,do they simply plug into the roof,or did you have to add some spades/connectors,so they connected back up?...Rod

thanks for this mate,very helpful.....is someone mowing the lawn?....

I have toyota d4d avesnis 2.0 (2002 year of production).. Which oil is best for that motor? I live in Hungary. Please answer.

how much did you pay for the console bro

i just used the light power for the uhf. lol

Is the EGR valve is use as a Turbo dump then?

Thanks for the quick reply...so I guess the EGR valve is use as a Turbo dump then?

Ok, can you please explain how the Turbo dump go as it dosent have a Turbo waste gate so I was thinking it goes through EGR manifold to release pressure.

Hi mate, is that another fuel filter next to the toyota one ?

How did the Turbo go after you blanked it off?

Hey mate this is something im looking at making myself for the rear of my 76 series, if i send you some photos and my ideas, could you provide me some imput mate, just subsribed....your help would be greatly appreciated.

do all the HIlux / Prado D4D's have the oil filter drain pipe? i cant seem to find mine (Hilux)

Good shit Winniliss!! Was going to get someone to do the install for me but now you've given me the confidence to give it a go myself and I agree with the comments below mate - you've done a great presentation, explanations are clear, concise and on the ball, your feedback about knockin ya noggin are really appreciated and your critiques are genuine and objective so I am happy to not only BUY the product but now to also do the install myself. Win Win!! Will jump over to your channel to see what else you've done that I might look at doing to our recently acquired 2012 200 series! Thanks mate. Paul

Just what I was looking for, thanks!!

Great video and very comprehensive indeed - thank you. Just a small thing though, I filtered my Castrol Magnetec (through a funnel) before the oil passed into the engine. Managed to catch a few stray bits of green container waste from the opening "cut" for the spout. Probably not a huge problem but worth a mention.

ARB Outback Roof Console For 2010+ Toyota FJ Cruiser

does it work in a nissan sentra interior 2012?

any solution for prado diesal nozzels knocking n pickup problem n give smoke when i press accellator for fast pick up slowly no sound no smoke solution n any treatment?

I used 5W40 full synthetics From Total is that a probleme i see you are using a 15W40 !

where did you purchase manual mapper?