Видео

Hello, the frame was cut at a metal laser cutting business found on-line in my area. Since then, I have understood that they no longer take outside orders. But, my solution is for the situation in which the glass is no longer present (i did not have mine), if you have your original glass I am afraid this system will not work, as the original glass is already larger in size than the actual opening and it cannot be drilled.

Thanks for your comment. It really made me feel better. Unfortunately I have gave up on RUclips as the platform is very unfair to small creators, especially those located in obscure countries. There are many things that contributed to that, but the main trigger that made take this decision is that almost an year ago I have received an e-mail from Google Adsense (the part of Google that you get money from, if your channel is monetized) claiming that my channel is depicting hacking, misleading information and content that induces people to do things against their will and terminated my Adsense account without any further right to appeal. This slap in the face (considering the fact that I wasn't even monetized) made abandon RUclips and wishing them nothing but good things :) In any case, thanks again for the king words, and good luck on your projects.

@@isographer You should not give up on something you love. I only have 79 subscribers on this channel. it's because it's just a hobby. I just started another channel where I am going to be fixing, building stuff. I have not created any videos for it yet. Buddy Please don't give up. Continue with it. By the way I LOVE Your country. I am also a European. I am from Portugal. Have a nice day.

@@lusitaniafilms Thanks for appreciation for my country. Unfortunately, when they cancelled my AdSense account they have basically turned off any possibility of receiving money from RUclips and/or other Google entities (this would also apply to let's say the situation where I would be making an Android mobile app and try to monetize it via adds). The only way to legally and risk-free circumvent that would be for me to create a different AdSense account in the name of a different entity such as a firm, with different address and bank accounts, and I am not ready to undertake such a step. Since then, i did not gave up entirely, I am currently rebuilding on TikTok, but in my native language, and the initial results are encouraging, even though I don't really like TikTok and I would have preferred to make content in English.

@@isographer Oh I didn't know that. I am sorry about that. I hate TikTok. I never go there. Wishing you luck on there. Have a Good Day Buddy :)

Well, this style of motorized bike had a very long production run. Yours being from 2005 is totally plausible, as well as mine being from the 1980's :) When I first got it years ago i did my research and concluded is from the 80's.

@ is have saxxonette luxus ik dutch btw

Please contact me on my e-mail. isographer@yahoo.com . Best wishes!

Hello, yes, if the wheel spins in one direction only AND the engine will not turn over, i would suspect the clutch, unfortunately.

@isographer Thanks, looks like it needs completely stripping down.

Hy, this is a valid question, however i think the length of additional line necessary to affect fuel pressure is far greater than what I have installed in that particular experiment. And yes, the engine feels much more lively and it would appear it would have better torque. Mind you, in small measures, but certainly something you can feel.

Unfortunately the model I had was without screws. The power cord just went into a block of plastic sealed with resin.

@@isographer i have Hitachi g12stx, and i needed to change a cord, and a screws was under like plastic cover or something. And yours looks like mine...

@@mantastumas5824 Than you are lucky. The whole reason I have made this video is because of the fact that the cord of my Hitachi went directly into a sealed resin-block, which appeared as a very poor design decision. Now, many times manufacturers produce *similar* items in different quality grades or batches for different markets. My grinder was bought new in in my country, Romania, so I suspect that had something to do with it...

Hy, i have considered using some sealant but in the end decided to go against it, for three reasons: 1. In case my experiment wasn't successful and I had to re-do it, i did not want to compromise the lip of the opening with hardened/sticky sealant. This way, if things go bad, i can just drill out the rivets and re-do it. 2. I was hoping that the canvas will become its own sealant, and luckily, it did. I sprayed the canvas top with a pressure washer many times, and I have no water ingress at the rear window ( i had to put a drop of gel Super Glue on each of the rivet's centers, because i had water seeping in through there, but not at the actual lip/rim of the window 3. I was afraid that applying sealant might result in ugly run-out dripping from under the metal frame, as I am not usually very good with glues/gooey stuff.

@@isographer "i had to put a drop of gel Super Glue on each of the rivet's centers, because i had water seeping in through there" - You have addressed my only concern. Basically I was worried that the hole in the canvas would move over time and become distorted, thus allowing water ingress. But you have it covered - nice job. If only all cars had the rear window pressed in, like my Saabs, instead of glued in, like my Volvo and your Audi, the world would be a better place...!

@@majstorovicaleksa9492 hy, i'm 194 cm so you should be ok.

All in good time, nobody was bon all-knowing.

Yep, the optics are of high quality and overall the kit is a nice thing to have on your collection. Since getting the kit depicted in this video, I got another separate Tair 300mm lens to actually "abuse" and shoot with it.

And miss out all the gore?

Hy, I have made this video with the purpose of showing what happens when you try to use heat to dislodge a stuck pipe nipple. The brake pipes and the bake hoses got replaced anyway on that car, so actually i could have used even more destructive methods than this one.

Well said.... thanks :)

Thanks! Didn't know what a Moscow Mule Mug is, but thanks to you i do now.

Appreciate it!

Hello, the tires are 195 SR 15 on stock rims. They are slightly bigger (wider) than the standard tires but they go well with the car and are easier to get.

@@isographer thanks so much for your response. I have an LJ80v and it had 16-6 rims with very thin bar treads. I am looking to get 215 on there with wider rims similar 👍

@@andrebaumbach9447 From what I understand the older style 16 inch rims equipped originally with bias ply ties are more common on LJs. In Europe in the later years of production there were 15 inch wheels offered (equipped with 165 SR 15 radial tires). To be frank a part of me would want to find a set of older wheels and try them on just for fun, but on the other hand i like the car as it is now :)

Hy, thank you for your sound advice. I have thought about doing so myself, and I believe it will work, however I wanted something a little quicker so in a subsequent video I have heated up the plaster mold in a kitchen gas oven, face down. The results were satisfactory, albeit the melted PLA smell was not (but the good part is that PLA is non-toxic) and overall the pour went well. Here is the video: ruclips.net/video/qcLMZMCr8N4/видео.html&ab_channel=isographer

Hello - Romania, Braila district.

@@isographer Thank you !

Hello, is in Romania, Braila district.

@@isographer thanks 😊

Salutare, merge cu orice spray de vopsea.

Salut, Twingo-ul l-am vandut unui amic, inca merge cu ea. As merge pe Fiat Seicento, ca sa fiu sincer, strict pt. oras. E mai mica si consumul e mai bun. Daca se asteapta si drumuri in afara orasului, atunci Twingo.

@@isographer multumesc

@@gicusv1 Cu placere, mai mentionez ceva legat de Twingo: primele versiuni (pana in '97) aveau un motor pe injectie similar celui de Dacia clasic. Era ok, dar consumul era maricel si performante asa-si-asa. Intre '97 si 2001 s-a folosit un motor cu injectie multipunct cu un raport f bun intre performante si consum. Practic in mintile lui acel motor poate sa consume sub 5 in afara (mers batranseste) si un 7 si ceva in oras. Dupa 2001 s-a introdus o versiune inbunatatita a acestui motor cu 16 Valve, mult mai potent (chiar se simte la demaraj) , dar cu un consum pe masura 7-8 L/100 in afara, si peste 10 in oras. Eu am avut motorul "de mijloc" , cod D7F si am fost f multumit. Motorul cu 16Valve e cod D4F, iar primul... e atat de rar in Romania, incat nici nu merita vorbit de el. Succes.

Thank you, the secret is to use sand. I have actually managed to cast a more complex shape in a later video, but in that situation I have kept the mold over night in the oven. I do believe that it is important to remove all the water content from it.

Hy, thanks for the kind words. To be frank it will not happen soon as the second vise is a locally produced one (Romania) in the 1990's and is not as valuable and is quite common around here. Furthermore, it is the vise I abuse the most and sees a lot of grinding, hammering and bashing not to forget all those times I've clamped something in it and heated up with a blowtorch... so unfortunately it won't get pretty any time soon.... I just oil the main screw and sliders from time to time.