Видео

Get a "fresh air exchange ", extend your chimney. Add a real cold air intake to your hearth on the fire place. Get a dehumidifier on your furnace

Is teflon tape really needed on plastic fittings?

Seems like you didn’t spend the time understanding building science, like control layers, ventilation, etc. That sucks to figure out after the build, but all builders have been there I guess.

That's Alot of Dirt/Dust. Alternatively, you can install the Filter at the Intake Port. That way It Filters Everything at the Source and Nothing even Makes it in to the Unit. That's what I did, My Core is Super Protected and Clean.

Hi, are you Exhausting/Supplying to More than One Location in your House? If so, I'm using the Independent Install Setup. When Exhausting/Supplying from/to more than One Area/Room/Locations, How do you maintain Suction/Supply Air? I Have noticed a Significant drop in Air Suction from Exhaust and Decrease in Supply Air when I "Tee" in to more than One Area. The 6in Ducts drastically drops the air movement after I "Tee" Off into Any Location. How do You Overcome this?

So, with the Tee, you are sending DeHumidified air back into the HVAC (return) AND back into the house for recirculation?

Imagine if you had not diluted the weed killer to cover more area. 😳 great update, thanks. I'm patiently watching my yard

Some companies will charge more however they have office space they answer the phone right away. They have direct contact with warranties from the different manufacturer such as heaters filters pumps the pool company we used as a three-year warranty on everything and we can call them or email them and they get right back to us if we’ve had any problems especially with the darn LED lights that go out because they’re poorly manufactured. It’s not the fault, you might get a cheaper price but what kind of support do you get after your pools built?$

How dose it good in the humidity i want to put that in my Florida home

I have that project pending right now. Your video gave me another take on how to do it. Thanks for sharing.

Nice demo.

maybe you should have replaced the axle shaft seal and wheel hub bearing assembly as well? I have a 2011 GMC Terrain with almost 123,000 miles so I will be changing out both sides and maybe disc brake pads as well.

I have a SA 324 and had part of the lower hood replaced last year. The upper hood near fuel filler cracked. I love the tractor but hate this plastic hood. My dealer is about an hour away and will fix it at my place.

My daughter and 13 year old grandson built these for me. Thank you so much for the idea. Would love to send a picture.... We used retaining wall caps.

All concrete will crack with a liner pool. It has no rebar to prevent cracking and may have cold joints. It’s just a base for a liner, nothing more.

That is your secondary drain ,which the plastic is part of the pan to put the water level higher which makes it the secondary

Do not knock that out you will be in trouble

Pulling air from above at the humidifier.

I dont understand how you expect to NOT have whats IN your outside air to not come into an air intake. If you want to FILTER your incoming air...install a FILTER. And stop complaining that you missed a step...

Tips for people looking for Basic pools. Exotic pools in weird locations will always cost an arm and leg. Shop around figure out what kind of pool and specs you want for your pool. Call every pool company in your area once you’re sold on an exact spec and pool type go back around and ask for the price for that with a breakdown of electrical, plumbing, digging, permits etc. Once you have that information you’ve probably weaved out the terrible pool makers who are asking for an arm and a leg. Call your local inspectors office and ask what the permits for a pool are for the specific kind of pool you’re putting in. As this video says if it’s a GC hiring all the work I’d call excavator companies, electricians, concrete, crane lift (depends on your pool) and get prices for everything. This will show you how much of a “profit” the GC is taking. If the GC is making 30+ % profit begin doing the work yourself. Personally I’d have the GC do the plumbing and digging and edges of the pool no matter what. This will ensure your pool warranty is good. I’d hire hardscaping company to then come in and pave the patio you want (concrete always looks crappy and cost more and is messier)

Mine will not pull the fluid out of the container. Pos.

I call that a tuning fork

Thanks a lot for the info! I am looking to install one.

You need to make up airplane for your exhaust fan and your air conditioners are

When it comes to Sprayfoam you can’t be cheap on the HVAC system. Not enough fresh air. Sounds like your hvac guy didn’t know what he is doing.

THIS GUY'S PROBLEM is that he talks and talks and talks - but not about DIY sprayfoam insulation and application... nope ... about his problems with the house, the fireplace, etc. He is one of the many many people who just love to hear themselves talk and talk. Google should wipe all these idiots and block their RUclips access forever.

I have a newer SA425 and my mounting plate has 4 bolts above the piston compared to the 2 bolts I see on yours. Als my hood does not touch the dash when opened, so they must have shortened the piston to slightly limit how far it opens.

When releasing pressure (red button), do I need to release all water out? Thanks

dont you bother about chaning your filters on a car as well?? better to just get rid of that junk to save time.

Hey Brantley my sales rep is pushing 425 but I want extra pulling power of the smaller 325 tire any thoughts?

The filter didnt expand when the housing filled with water that was just an optical illusion. Thanks for this review, im looking to replace mine because the handle/valve sprung a leak when i changed it. Figured its time for an upgrade

BTW 78° isn't hot .. but, I'm sure it's hotter in the attic..

Yea, I saw this coming thankfully. I have Broan 150 AI I am installing on my place this week and I am adding a pre merv13 20"x20"x2" inline when the air enters the bldg before it gets to the ERV. I also have 10"x10" grills in all the rooms for the return lines that will have a low merv filter to catch most dust before it gets to the core. FYI, I have a ductless min split heat pump, so my system is a stand alone setup. with 4" return lines from 5 locations in the house and the single 6" supply. CFM on average day will probably be about 40-50CFM for the three of us.

This can be solved by using a fresh air in take added to the ac unit. But I don’t recommend spraying foam. A good cellulose insulation is good for a house and you have the house that breath properly so your air is not old air and the carbon build up can happen with spray foam.

Nicely done. Thx!

Great job !

Glad I watched this. I would probably put some sort of filter before it gets to the actual unit that way it stays clean

wow! I wish I had these skills.. looks great!

What other unit do I see at 5:44 make? I am looking into whole home systems as my house is way to humid for my family’s likings. Right now it’s 75 degrees with windows open and 45% RH vs when central air is on and 63% RH.

Wow you're lazy.

Ice cream melts, concrete cracks

The AC drain line SHOULD BE easy to Clean Out when Properly installed 👍😅. When NOT installed Correctly then it's a Mess 😕😔

BS. I have no problem with SPF in my house

hi i have had a similar problem, but i have no flow light on my aqua rite board. Did you have that as well ? i was told the pressure guages fail. so that may be my next purchase. i am out of options as well

Did the compressor stop running when you lifted up the float?????

Man I'm sorry to tell you ain't cheap out on a weed free yard

I did the same thing many hours of checking everything but the faulty pressure guage . Great video thank you

Yes sir spray foam is for conditioned houses so there is ventilation. Try turning your hvac fan on

Right behind where you are standing in the very begginning was iso heavy foam, bad pressure ratios caused this.

The Exact Reason Why I Went With Broan AI System that Auto-Balances