Видео

One question it will work with ch341 programmer right ? I found its the easiest one without removing the bios chip

Hey. Thank you . The cable is what you say micro usb that is the name of that connector. Stay safe and happy.

Nice little fluid fix for you. Stay safe and happy.

Hi The issue you're experiencing with a delay or latency when recording voice-over in DaVinci Resolve can be caused by several factors, including your system's audio settings, the buffer size, or potential software conflicts. Here are some steps you can take to troubleshoot and fix the issue: 1. Check Your Audio Buffer Size Buffer Size: A larger buffer size can introduce latency, causing your voice to be delayed. Try reducing the buffer size in your audio interface settings. Adjust in Resolve: Go to DaVinci Resolve > Preferences > System > Video and Audio I/O and adjust the buffer size or latency settings. 2. Ensure You Are Using the Correct Audio Driver ASIO Drivers: If you're on Windows, ensure you are using ASIO drivers, which provide low-latency audio performance. If you're using a Mac, the system usually handles this well, but you can still check for any software-specific settings. Set the Correct Input/Output: In Preferences, check that the correct input and output devices are selected under the Video and Audio I/O tab. 3. Reduce CPU Load Close Background Applications: Other applications running in the background might be consuming CPU resources, leading to higher latency. Close unnecessary applications. Lower Project Settings: Temporarily reduce the resolution and quality settings in your DaVinci Resolve project while recording your voice-over to lessen the CPU load. 4. Use Direct Monitoring (If Available) Direct Monitoring: If you are using an external audio interface, check if it supports direct monitoring. This allows you to hear your voice in real-time without the delay caused by the software processing. 5. Check Audio Hardware Compatibility Ensure that your microphone and any connected audio interfaces are compatible with DaVinci Resolve and that they are properly configured. Updating the firmware or drivers might help. 6. Update DaVinci Resolve If you are using an older version of DaVinci Resolve, consider updating to the latest version, as this might fix any known bugs related to audio latency. 7. Record Voice-Over Separately If the issue persists, consider recording the voice-over separately in dedicated audio recording software like Audacity or Adobe Audition, then import the audio file into DaVinci Resolve for syncing. After applying these steps, your voice recording in DaVinci Resolve should have reduced latency, making the process smoother and more real-time. If the issue continues, you may need to further troubleshoot your system’s audio configuration or consult Blackmagic Design support. Hope it helps you out stay safe and happy

Glad I could help! Stay safe and happy.

Hi. I think so. Stay safe and happy.

Hi every laptop manufacturer and model is different. I never did your laptop. I doubt that there is a solution to it available. The only suggestion i have is to research it but I'm not your saviour. Stay safe and happy.

Nice work! Stay safe and happy.

Hey there - blue screen might not be connected to this at all - you need to find out what causes blue screen in the first place and then you will be able to fix it , like for example gen 13 and 14 intel have manufacturing errors and that is giving blue screens. There is way to many options to assume is integrity issue. Research and find out. Stay safe and happy.

Hey. I'm glad i could help you. Be happy. Be not afraid. God give us everything exactly when we need it. Now talking about a files like that - technically many files that we all have on our laptops and pc are vulnerable and given that one possess knowledge they can exploit it - that is called hacking. There is no solution for that as anything that human thought of another human can break in to. Now that they are gone you have that extra layer of security on giving you peaceful mind. Stay safe and happy.

No problem, stay safe and happy.

My pleasure. Stay safe and happy.

Just trying to help. Stay safe and happy.

hey. Never had never tried. Stay safe and happy.

Hi. This would mean that you have an hardware problem and not software issue. I would advise contacting them if on warranty or going to local repair centre. Stay safe and happy.

Glad I could help! stay safe and happy.

Happy to help. Stay safe and happy.

😉 Stay safe and happy.

thx.

Glad it helped!

Glad I could help by not helping lol. Stay safe and happy.

This would drive me crazy. Stay safe and happy.

Glad it helped stay safe and happy.

thank you for writing this. It helps. Stay safe and happy.

You're welcome! Glad i could help. Stay safe and happy.

I actually considered that, but decided to keep them and i had lots of bulbs to check recently, o boy, how glad i was i did not remove it. Thank you for writing to me as it is nice to be able to talk people that watch my video. Stay safe and happy.

Sleep tight, don't forget to wake up for final judgement. Stay safe and happy.

Hi. Thank you. As it is gen4 processor it should work but I'm not sure because i never tried on it so this is your call - back up original bios so you can revert to original state. stay safe and happy.

God blessed me with you and your comment. God blessed you with information you need at the right time, God do love us all no matter what despite us blindly accrediting miracles He dose for us to modern human and luck or coincident. God is the only way. Stay safe and happy.

Stay safe and happy.

Thank you for taking time to write that. It made my day. I'm 100% sure that there is many things i could learn from you too. You needed to see some things so God show you them exactly what you needed to see when you needed it. I can do this thanks to Him letting me and showing me how just like it happened to you and it is happening every day to people but they are to blind to see. I never was in Egypt and i know i will never be able to be there to see this beautiful place full of wonders. I wish you all that God have ready for you my distant friend -stay safe and happy. And remember there is nothing that a little soldering wont fix ;)

¡Muchas gracias por tu comentario! Me alegra mucho saber que te funcionó y no tengo ningún problema con que hagas un vídeo en español para apoyar mi canal. ¡Saludos desde [tu país]! Cuídate mucho y mantente feliz.

@@fluidfix ​ @fluidfix te dejo mi humilde aporte, a traves de estas instrucciones en español. 1° detecte el chip bios de su Lenovo. Luego proceda a desoldar y prepararlo para leerlo con el programador de EEPROM. 2° Abrimos el Software del programador y procedemos a Leer el chip (read) y luego guardar (save) [se sugiere guardar con el nombre del chip ; ej winbond 25q64jvsig] 3° Instalar phyton y sus librerias. 4° Arrastrar el Archivo de bios encima del Script "Autopach". Esto nos generar un Archivo con el nombre que del binario seguido de la palabra "PATCHED" Ej: primero guardamos el binario con el nombre de : (v1)Len_tp_e470_win_25q64jv y luego de arrastrar encima del script nos genera un archivo con el nombre de: "(v1)Len_tp_e470_win_25q64jv_PATCHED" 5°Volvemos a programar el bios con el archivo generado, terminado en PATCHED ej: "(v1)Len_tp_e470_win_25q64jv_PATCHED" y soldamos a la placa nuevamente. >Encendemos el equipo y presionamos "F2" para intentar ingresar al bios (o la tecla correspondiente para ingresar al bios, si no sabes cual es la tecla de setup/configuracion, presionar F1){Sugerencia trabajar con teclado del equipo} >Escribimos una contraseña Generica EJ: 1234. >Nos Aparecera un mensaje :"All service security DXE driver. Press any key" >presionamos Enter >volvemos a escribir la contraseña generica >Presionamos Tecla "Espacio" >Nuevamente presionamos tecla espacio. Si nos sale un cartel que dice "TPM certificate changed . Turn it off" quiere decir que salio todo bien. >Apagamos el equipo 6° Desoldamos el chip nuevamente y lo vamos a programar con el mismo binario el cual le hicimos backup en nuestro caso buscamos el binario (v1)Len_tp_e470_win_25q64jv. Terminada la reprogramacion volver a soldar en la placa. si todo sale bien, NO nos deberia volver aparecer el candado o icono de supervisor. Si presionamos F2 deberiamos poder modificar todos los parametros del BIOS ; EJ: cambiar la orden de arranque , modificar secure boot. Una vez dentro de la bios volver a valores predeterminados. ¡IMPORANTE! >realizar backup de archivo de bios >Trabajar con cuidado en la zona donde se encuentra el Chip BIOS, no vaya a desoldar otro componente. Si al realizar el trabajo no les aparece el disco aqui dejo una Solucion que me funciono a mi : ​Saquen el disco de la notebook. Realicen backup y formateen el disco. una vez hayan formateado el mismo conectarlo en la compu presionen f12 e instalen el sistema operativo. si van a instalar windows les recomiendo descargar los controladores de almacenamiento gofile.io/d/HUIHPw extraerlos con 7zip y copiarlos a otro dispositivo de almacenamiento. una vez inicien la instalacion de sistema operativo si no le aparece aun el disco buscar donde dice actualizar controlador e ingresan al medio donde guardaron el driver controlador de almacenamiento. al reprogramar la bios se pueden borrar firmas que reconocen el disco. Muchas gracias Nuevamente por tus conocimientos. Saludos desde Argentina

Thank you for letting me know. Stay safe and happy.

Humanity could work on lengthening their attention span from 60 seconds. Just like old good days were. Stay safe and happy.

I think you will never look back after you spent some time in it as it is in my opinion everything one need in one place. Glad i could be helpful. Stay safe and happy.

Thank you so much. Glad this helped you. Stay safe and happy.

Thank you for shearing that it worked on lenovo t560. Stay safe and happy.

Hey. No clue as i did not try this on that model.

I cant find anything with this error to be honest but give it a go try as it just might save a day. Hope it helps you. Stay safe

restart computer and try again

@@fluidfix Still didn´t show on the driver store explorer, what could the issue be?

Try using revo uninstaller free version and that might help you locate it other than that i don't really know.

Hi. Thank you for asking. It is 100% possible to do that just be extremely careful when you do it - both with or without cpu in the socket and you should be fine. Goes without saying i think do not overtighten it - pay attention to how much power you needed to unscrew original retention bracket and use same amount of force when installing the bracket. Stay safe and happy.

Thanks to god I'm here and if not for him i would never figured this out so not me but him deserves the praise here. Glad i conveyed information's efficiently enough you could follow along and get it resolved. Stay safe and happy.

Great to hear! Thank you for your nice comments. Stay safe and have fun.

I have no idea why. Stay safe.

That is extremely nice of you. Thank you. Have a lovely time doing what you do and bring a smile on your audience face. Stay safe.

Mine worked for longer than that. Stay safe.

it is not about hearing recording it is about echo of your voice when you do it. Stay safe.

@@fluidfix Gamings finest is correct. When in Fairlight, click the fairlight tab at the top, choose input monitoring style and set it to mute. This automatically turns off the output channel whilst you are recording and then turns it back on for playback, Much, Much easier than remembering to mute the chaneel all the time.

@@StrettysSeeSights Hey. I just tried that in fairlight input monitoring style set to mute - all that dose is not showing that i actually speak on the graph display but records as i can hear video but sadly it creates same echo effect when video is played back so i still think my way is the easiest way - i followed your suggestion step by step. It is just easier to do it my way i think less steps one quick click and it is done. I gave it a try as i want a simple solution to this - i might be doing something wrong I'm just a fool don't judge please lol.

Thank you. I'm happy i could be useful to someone for once. Stay safe, be happy and that happiness you felt when it worked please use that to make at least one more person happy when you can pay it forward my friend and God will look after you. Thank you.

did not know that is the case - glad i have a cable then.

Yes, I’ve tried it with battery and cable. If you have a plug-in go with the cable instead the cable works a lot better a lot more customizable opportunities and said the battery I have to get up on a ladder every six months to grab the battery. Thank you.

And plus you get motion warnings and a couple other features when you have it plugged in when it’s battery powered, you don’t get those features. Thank you so much for replying.