Видео

That knife edge with a snap and roll with no room to crash is sweet, that Lincoln rc flight club in Nor Cal got a treat that day👍

❤❤❤❤😂cool 😎

Machst du die Rates bei jedem Flugzeug ungefähr gleich?

Right into a harrier rolling circle, as planned! 😅

Fake

Incredabal wow

Got lucky

Good save

Really smart to put that Shop "button" right where the action happens so we can't actually see it. 👏

jet RC model

I think you leveled your wings too much and pulled on the elevator to much and going full throttle

Just amazing!

Damn Juan... wear your brown pants?

Great flying and awesome setup!!

That's cool just don't go to long up there an loose it ,, nice landing

Great interview!! I have three of Flex Innovation's planes and they all fly great. Several at my flying club have now gotten the Flex bug as well...

That's a remote controlled toy. Look at it's size compared to the runway. A real jet would make the runway look small compared to the plane

I've been looking for a guide like this for a long time and I found it. Perfect.Thanks.👍

Wow

Wow that wild

"Que animal!" 💪🏽😌👌🏽

Is this a pilot RC model?

I believe from my understanding that there is only one Russian pilot in the whole world that can do maneuvers like that. I don't know his name but i'm pretty sure i'm correct

😱

greetings friend! Is the procedure applied to the TD SR12 model?

What is the airplane on the shelf over your shoulder? I love the look and would like to get one.

❤

Where is this extra inch or two in the case as the X20S and R look very similar in size to me.

Hi Juan, what is the best option instead of MXS V2 in your opinion? I want to perform e.g. Crankshaft...

Going to have to send this video to some people 😂

Another awesome interview!

Do the MD5301H get warm? Are servos getting warm normal? I did a test for 15 min with a servo tester and the MD5301H got warm. Not hot just warm.

Awesome review! Did you use the APC 11x5.5E prop or some other version? Did you change the ESC or was the ESC overheating? I just got this plane and also the APC 11x5.5E thin electric prop and i don't want to burn the ESC. Thanks in advance!

I knew I recognized the Lincoln field. If I do get one, I will add a satellite receiver.

Another way to do that, more easier and same result, ruclips.net/video/Euwc7b0mDZM/видео.html

🙏THANK YOU!!!🙏 I started flying a 20”wing RTF two weeks ago! Then bought a 1220 ranger, 64mm Futura, and this transmitter/ receiver! My goal is the Viper!! But first… 😔the 20”🤷‍♂️

Thanks for the info. One other question when putting in the aileron control horns it looks like the inboard and out board are the same length, I know a some other manufacturers have different lengths for each since the thickness of the wing changes. Did you have any issues with setting them up with the same length control horns?

Season's Greetings all. Awesome video and content. What no one is saying or showing (as far as i can find) are ways of tweaking (I'm working on this) Auto Level response. If you're used to AS3 type stabilizers, in Auto Level any right stick movement off center causes the stabilization to "back off" and it's "your airplane". I find the FrSky stabilization system does not want to relinquish control, regardless of gain settings and fights you for the airplane. I belive under "SRX Stable" that can be tweaked, but i am yet to find proper info on that. On scale models with AS3 I sometimes like to use auto level on takeoff and/or landings to ease the workload especially on the scale Jets and windy days. Mind you, I am coming over to FrSky from JR 12X / Spektrum receivers and Hobby Eagle A3 Super 3 stabilization. Some of my jets are still Spektrum / A3S and im using a multi protocol module on the X20S and thats just fine. Nonetheless, I love my FrSky X20S and the SR series receivers, im just not using Auto Level feature, but certainly have it on an "Oh Sh*t" button.

Awsame video thanks

I worked out a variation of what Perez did at 3:13 years ago. It was based off of something I saw Shawn Tucker do when he flew a Pits in the early 1990's. I've never seen a monoplane pull it off and the only way I could make it work was by using parallax to make it look like as if the plane was doing the impossible. I'm glad to see someone taking advantage of that concept. It's easy to do with RC because you flying from the perspective of the spectator. Thankyou for the video.

Hey I saw a Juan Sanchez in a CAmodel video from 16 years ago, I think the plane was a CAmodel Galaxy. Was that you? Thanks for your videos, I really appreciate them.

Good list, but I'm giving myself a PT-19 and an X20pro AW (orange) this Christmas. Cause, I know I'm getting socks and underwear otherwise❤😂

I have been eyeing the FrSky X20S as my next radio for the past year and had some questions I needed good answers for before committing. This interview with Steve answered all of them. I have never watched a more candid, down to earth, informative and thoughtful interview with a customer rep. My hat is off to steve, Kudos. My next radio is definitely going to be the X20RS.

I have 2 Hota S6 chargers and they won't go to 24v on my DIY 24v PSU. The Hota D6 does. No idea. Thanks for the heads up on this charger 1000w and 4 ports. If this accepts the 24v properly then I can crank through batteries at 2C at the field.

Great list of gifts. I use a modified cheap 20-dollar charger to discharge batteries. I removed the circuit and the resister heat sink and connected a bunch of lightbulbs. It will discharge a 4x 6s 5200 lipos in 15 minutes.

Fun Interview! I feel the passion and enjoyment for the hobby within Ryu and Tony. Hilarious that building planes to stop buying them so their wives wouldn’t complain turned into a career in it! That’s what it’s all about. 😆

I liked the intro I’ll have you know 😆 You forgot to mention why you only drill half way through. I presume for less of a chance to chip the backside and to eliminate the possibility of the drill press being off a tiny bit resulting in more of a uniform hole. It’s been said compression is what helps keep the prop on and a lot of folks make their holes more of an hour glass shape. Seems silly, but it’s fair to say that perfection isn’t always needed. I always balance after drilling too!

2:29 I would recommend the Dremel HSES-01 it’s under 50 and although it doesn’t have a gyro like the dewalt - it has a clutch!

Nice interview! Absolute pleasure meeting you both at Joe Nall 2024! Thanks for spotting my flights from time to time! Hopefully see you guys next spring!

Would definitely like to hear about the new Aeroflot rc 10 simulator. I hadn’t realized there was a new one and I just bought realflight evolution