Видео

AWESOME!! 👍🏽👍🏽

Did you end up building or selling this? I've had my eye on it but it has some serious scale flaws that are bugging me. Interested to see how yours came out.

Nice Video! Why is the rpm already at 1.600 rpm while the engine is "off"? Do you know, if the sensor can wotk with Graupner Hott receivers?

Good flying and helpful commentary.

Left engine not tuned right, should have straightened out that before ever trying to takeoff. Was it fixable?

I would put the missiles on

Did the landing gear set come with the kit?? Thanks!

Great smoke

Does the wings fold

Still making these ?

Thank you very much for sharing your knowledge with us ❤

Beautiful workmanship ❤

47K. You’re shitting me.

Hi - thanks for the video. I have the exact same setup. Before I put it in the air, was trying to test the SAFE feature that auto corrects the plane controls. It finds the satellites, can set the home point and zone, have the green light. When I pick up and put the plane in different angles/attacks, even upside down, the controls do not move. Thinking they should? I even took out the GPS module and tried - still no movement. I can control all the surfaces manually with the transmitter so know its binded ok. Any thoughts? Just getting back into the hobby after 40yrs.

Thank You so much for sharing all those stuff with us.

Thanks - I just started building a Seagull Decathlon 120 and want to do the same thing with the smoke. Will be a bit tighter install, but this really helped me - so thank you! Using a 26mm motor.

Oh my..I forgot to ask you. Would you happen to have a pair of those fancy ass crimps hanging around for disabled Vietnam veteran Would you? If not, please point me to a "decent " pair? Hoping it's made in the USA 🇺🇸

Nice video, Sir. I've been in the hobby for 15 years. One thing that I figured out was that you need a special tool to perform (or make your own stuff). At 71 ,I figured these days would be simpler. 😅😅. Now I need to buy a pair of "crimps". The name of the game in this hobby....gotta love it😅😂

Any update on this build?

Very nice thank you😊

Thank you for this video.I've got 2 70mm Vipers, a 70mm F-16 and the 80mm Warthog. And now I can't shake the Turbine bug! So I'm watching videos and educating myself. Hadn't really considered this jet but now I'll look harder at it. I have a friend who has the MB-339 and he loves it. Bad experience with the Turbine tho. Smoked the bearings after 6 flights. So I'll be researching turbines as well. Thanks again.

Dude that phrase is for air brakes not wheel brakes... You should take that off of there because it doesn't make any sense on wheel brakes

😎

I used a clothes iron and misted the foam and et voila, healed a dent I had in EPP.

Finally got me a Sullivan Megatron starter. Man, does that work good!

Hey Brenden. What length servo arms did you use with your pro modelers? 25mm or 45mm?

Cool Bud, I did'nt know about this model until just now, Ive dabbled into these paramotors some, I will say stay away from the HK model, its very hard to launch and you will crash and break more than fly it, also no spare parts available. I did however pick one up from Hackermotors its a very similar design to this model and its easy to launch. Launching is key and very little wind. The Hacker model has lights on it which is a plus but you can instal some led lights on yours. I will also check out yours on there sight to pick one up also. Once you get it down its very relaxing and enjoy. Thanks Brendon for the great demo👍👍👍👍👍

So... you got over 5 minutes of flight time with SMC 5300 40c pack, but you were very conservative and not hot dogging it too much, I have a couple of HRB 6s 6000 50c packs. I'm seriously considering getting one of these bad boys, so abouts how much flight time would I get on these batteries I have already? I would probably be hot dogging it about 70 percent of the flight time. Love your videos.

brendan i have question. im trying to sync some d645mw servos for my legend hobby t28 build. i just got the hfp-30 programmer. on your video your servos show 54 in each direction. when i connect my servo the number is in the 100s and i cqnt get left and right to match like you did because i have to reverse 1 but i want the travel the same each direction. any ideas?

you look like your constipated!!

Just ordered toprc p51 Blondie woohoo

I am going to be doing this myself soon on a couple smaller scale fly Baby's, only i have to make the cowls. Have the plug made, ready to fiberglass.

I love this vid. Great instructional project.simple too!!

Great looking cub

I'm curious, I'm just now setting up one with a StinGR 85. Yours appears to be set up with the ESC on top of the motor box, (from looking at the motor mounted on the left), little or no airflow if so, and there aren't any vents opened up on the bottom for air exits. There's a knock out at the bottom in the firewall for a pipe that should be removed, and a vent cut in the covering just behind the gear, how are you providing for cooling?

Gorilla glue for hinges

Dude you have to take a longer take off just let it fly on wheels then GENTLY rotate geeeze

Where did you find your steamer, all I can find is big wide one.

Best regards, I finally finished assembling the same model as your Decathlon. I would like to ask you to tell me how you weighed yours to determine the CG and if it is really what the instructions say, 170mm from the wing edge. I would like to know the details of how you did it so that I don't break it on the first flight. I would be very grateful if you could explain it to me.

Do you think the asp 400 5 cyl radial would fit that ? It's 65cc...

Cool! It looks like it launches a lot easier than others I have seen. I am wondering if you could add a bit of extra weight to stabilize it? It seems like it jerks back and forth a bit.

Awesome T-28

What are those explosions?

How you doing thrust tube with aluminum?

Hunting Bambi in the background 😂

It looked like it flies real easy. I will say, the Hobby King paramotor is nearly twice the size (2.4m), has lights and landing gear and the canopy is really quality material, and is the same price. Paramotors are fun, and a total change from planes. A great way to end a day at the field if it has lights too. Your place looks and sounds like mine this time of year. Valley floor, leafless cottonwood tree borders, and hunters.

Brendan I have a question for you alot of guys at my Binghamton Aeros want me to buy another AL37 and have you paint it for me in the Trump Force 1 are you game to do it?

Can the main gear be installed on the wrong wing panel which would cause the doors to be reversed? Or did they get the doors reversed at the factory?

This looks an attractive plane and the dimensions appeal to me.

Awesome bird!