Видео

Thanks brotha I’m rebuilding a 98 and this helped a lot I was stuck on the hose on top of the overflow tank who would have known it was just hanging off the side 😅

I have an S60 D5 from 2003 and I have no voltage on the wires going into the egr

Analysis by replacement is a poor tactic .

That’s a good looking car

Some fantastic advice and guidance. I’m currently getting my 98’ Firestorm back on the road after being sitting for 3 years. 👏🏼👏🏼💪🏼👍🏼

Thank you man ,this video saved me alot of time reattaching my hoses

Thank you

Those bikes have the exact wheelbase rake and trail as a 916 Ducati not as racy but a better more durable and powerful twin.I own a 98 and the brakes are weak and spongy and suspension is soft but ok , but they are stable and handle so easy and great.

Where is speed sensor located?

Great job, I'm just going through a very similar process myself 👍

The air box clips can be easily released by using an 8mm socket on a long extension. You fit the socket over the four prongs and push down while pulling up on that corner of the box. The box will pop right out.

Hey is there a key code on the back of that ignition? I have the same bike and need a new key and people said it’s on the back.

What in the heck you doing with this video cuts and turns I seen nothing you doing?

Hi. At 5:10 I’d love to know where the other end of hose number 11 goes please.

Not sure you’ll even see this but I have a 01 Volvo s60 2.5t and there is no cam sensor in that position yours is. Any idea about this car?

Bike ignition got vandalized by thieves . Are there any how to video's to unlock steering on vtr 1000

nice love it guys!!!

Is that Murfreesboro?

Very nicely done I love especially in blue on blue interior it's a blutiful fox4eye👍👍🏆

Four Eye! Love those. Great sounding Fox. They're so fun to drive. I've gotta 90 GT.

Sounds good what mufflers are you running??

Drive that thing like it’s meant to be driven 😂

More more more

I have an 86” love your sons ride.

Sounds good

Thanks bro your video has just saved me so much time...😊

Nice

Great video awesome car love the four eyed cars Ford power forever baby keep on pulling the knot out of them bow ties and the horns off them Mopars

Did 14 get connected to anything? (Long thin pipe from the front carb on the right side)

Change your fuel rail sensor

I got a 2004 xc70 my engine bay don't look like that you power wash it weekly

nice man! looking at getting the monster SP+

Good videos.

That Front Left Carb Breather Hose is a Total Bastard to get on, i'm looking now to see if there's a Trick to it, the Plastic Tray Stops you from using your fingers to push it on! I'm tempted to cut a hole like you did but on the Opposite side! -Cheers 👍

Thank you had hose 13 attached to the tank but could not find where it went on the bike. New it was a vacuum hose but could not find it for looking

the easy way to get the box out is to use a socket. Don't remember what size, maybe an 11 or 12 mm and a little wd40. Spray the plastic plug and jam the socket down over it. This will close the plug just enough to lift the box up and clear it. Repeat at the other two locations.

I can't get spark out of mine lmk if u had this problem

I kept hooking up #13 to the vent and it kept dying. One of the best videos I’ve seen. Very detailed. We really appreciate you!

Japanese Phillips head screws need a JIS (Japanese industrial standard screwdriver) to keep from camming out- US Phillips screwdrivers will not work. Actually, the Phillips head that comes in the Honda tool kit works quite well

Excuse me, the part you changed is also known as a speed sensor? or is it another part .... greetings

Great video from a fellow VTR1000 owner in the UK - thank you

You swaped the 2 sensors at the same time? Don't you know which sensor was the bad one? I have the exact same problem on my 2001 S60 T5, I already swaped the sensors, sometime the motor starts and runs just fine for a while and sudly it takes 10 ou 15s to start or even several attempts.

Hi I really happy to find your RUclips channel 🙂 I bought Vtr 1000 for winter project and your instructions are super helpful for me! I looking for manual pdf if you have maybe can you send on email or give me link ? Please Regards from Poland 🇵🇱

I know the clunk you mean. But hasn't affected the bike from running great.could be just a total misfire now and again

Nice! The same bike I have with the same colors, love it! I ride mine in Bangkok ruclips.net/video/35e4gKi3wdg/видео.html and its crazy hot lol

I put a set of delkavic mufflers and my bike is running very rich, can you tell me what kind of jets I need to buy, factory air box by the way!

Where in NC I'm in Raleigh 03 vtr1000

I mean the black wire on heat switch to the plug with the black and green.to bypass

Black wire to the negative on plug that got green and black to the black to bypass the heat switch fan will go if fan is good it be the heat switch more than likely

Hello!! My vtr 1000 is overflowing fuel into engine, and coming out from it exhaust