Видео

I had those on my lifted 97 crew cab (15" lift) I drove the truck about 15' then decided to remove and return. They looked like giant balloons to me :) I went back to Ground Hawgs. They look good on this truck, but a mud tire would look better imo.

im now in "total demo mode" . thank you

no head work ?!?

Also make sure you install a tapered lift block on the rear otherwise you may suffer driveshaft vibrations. This is required on all single driveshaft trucks, all Excursions have single driveshafts, so you can maintain correct pinion angle to transfer case/Trans.

On my 2000 Ex I did the factory X codes springs up front and 1" shackle lift and raised it 3.5" and a 5" Ready Lift factory style spring block on rear, threw out the factory spring block. Its always better to use one block , stacking is not a safe practice. Now it clears my 35's and sits level. Handling is awesome and with addition of the stiffer factory F350 rear springs I installed I don't need to add a rear sway bar.

pick up tour cords

DO NOT modify the side marker light or plug! Get yourself a set of these (less than $9)… A ABSOPRO License Plate Light Socket F37Z-13550-A Wiring Harness Plug Connectors Holder for Ford F150 90-01 for Ford F250 F350 F450 F550 Super Duty 99-15 for Ford Bronco 1990-1995 (Set of 2) a.co/d/08QkEuZ5

Awful is right. What a useless little pantywaist.

Thanks man this is the only video I could find

I got a 99 f350 with a 12in kit debating which shocks to put on the Rough Country are not good anymore on the truck. Fox or Bilsteen any suggestion ?

Im ngl the subtitles got me dead in this video. Youll watch regular traffic go by and no subtitles... but the ol 7.3 passes by and its like [Applause] [Applause] [Laughter] [Music] [Applause]

I have a 1984

Ever hop on a dyno with this truck? Know what the wheel HP is?

ZF6 = 6 forward gears. Just because it has an L doesnt make it not a forward gear

hey bro excellent job. is the boost fooler necessary if you have hydra tunes?

Be detailed, and show 👍✌️

What do you have done for front suspension?

Would be neat to leave it a long bed but put her low. Just my opinion

I own an f-250 single cab SHORT bed 2002 6speed manual... 2020 front end

Less work to replace entire bedside

should redo the rear

I ordered the same clutch master cylinder & slave from SBC. When I replaced my clutch. The master cylinder lock tabs and spring washer broke less than a year after installing. I don't know why. I'll be replacing the master cylinder soon. Great video.

Man I want this kit.

Very helpful video. Thanks.

Whst did u do with the bolt that got thru the middle of the leaf springs im tryna take out a leaf but the threads aren't long enough

Same exact setup here. Front axle shifted foward a couple inches and shocks are at a slight angle. Bump stops not centered either. Any clue? Front leafs could be flipped and gain an inch but the military shackle would then be in back

Brother you made this look too easy 😂 I find myself trying to separate the inner body folds/ rockers in between the front and rear doors… exploded a grinder cutting wheel and would rather not do that again. Any tips on how to separate would be greatly appreciated!! Great work and thanks for documenting!

I can dig it bad lil shorty 🤟🏾

Hell yeah, its about time the 7.3 gets the love it deserves. Everyone has modified the 6.0, but its the 7.3's time to shine...again😎👍

It’s nothing compared to my 2006 lbz duramax with 750 hp

Great video 👍🏼

Maybe they aren’t removing liner. That’s why they are making wrench. Going to need to do this today. One bolt broken and the other front side stripped head so yea that won’t be fun

Where did you get the clear headlights?

What is your suspension setup truck looks really nice!! And did you have to do any trimming so the wheels don't rub

What kind of tape did you use to cover parts you didn’t want paint on/in?

Thanks for the video. I am getting ready to try this on my 7.3 to replace my oil pan. I am nervous because I haven't done anythign like this before. Where are you located? You want to help a guy, I'll pay you! :)

In need a manual so fucking bad my trucks got irate Efuel 180/30 injectors kc300x, adrenaline Hpop just lag out at some points but it’s got balls when I stomp on it but a manual will fix it

What all tips do you have for pulling the motor off a zf6 without dropping it. Just bell housing and pull it off the shaft?

Nice video I just picked up my panels from Body Shop Price in Meriden and gonna be starting on my 2005. 👍🏼

This is a super cool build! I built a 2002 7.3 shorty, with a 4 inch lift, 2005 axles and 40 inch tires. Not as good of a rock crawler as i hoped, but it looks like a mini monster truck

I was a little concerned with just a few of the welds on the frame. The thick coat of black paint resolved everything though! Headers are really cool.

Ok this sounds like total dog shit but cool at the same time idk how that works but it did i guess im sure you know but i hope you dont run that tune all the time itll wreck them injectors and soak them cylinder walls causing fuel to get in the oil

Seat belt anchor plates

sat for 10 years and didnt even get a startup on video? SHAME

What wheels are those and specs they are beautiful and would like them on my ex

i think I'm gonna replace mine soon. i've been driving without a clutch pedal.

What’s the suspension setup, have a similar truck like the way it sits.

Did you use the RC body lift ??? Got my papa 1983 diesel for Ranger long bed wanting to do same thing ??? Thanks looks nice

Awesome find ! Would love to see some power added to this one It’s hard not to with it being a single cab

So I put the extreme tune on mine it’s a 140horse tune from power hungry and when I put it on that tune the truck just kills itself. I have 180-30% injectors but just curious what a good solution is for that. Thank you!