Видео

This mkstake happens to me this week too and i didn't know about These issue, printing petg. Than of found your Video. Can you Tell me your First layer Speed on the carbon surface plate?

Hi, thanks for the video and nailing down the problem. I have completely same issue - broken 2 nozzles that came with the printer. Additionally second nozzle damaged printing surface and yes I printed only PETG. After a week of communication with Sovol and sending them photos of the damaged parts and photo of the serial number of the printer they finally send me replacement parts. Since the parts shipped from China it will take up to 3 weeks to deliver :( . While I waiting the replacement of the standard nozzle I decided to buy on Aliexpress in Sovol official store the nozzle made from the hardened steel and has thread so it will not have same problems as the original nozzle shipped with printer.

Do you have to put a piece of PTFE tube in it?

I looked into this order and got a quote of around $98 which i think isnt bad. But im curious of how it is printing with that nozzle. Would like to see a detailed video of how you installed and programmed the Printer.cfg and other settings.

I made the error of ordering it in printed alluminium. It required some postprocessing (the 4mm bore for the tube was too rough and I used a drill to "polish" it inside and the little bore at the top I also had to widhen a little). However, I paid 88€ for two heatsinks, so I think the extra work is worth it. Everything works well. Actually there is an alternative to custom made heatsinks. Some people already made adapters to insert Bambulabs X1C or P1S/P1P hotends into the SV08. You could use such an adapter and a Panda Revo for the X1C. While the Panda Revo normaly costs about 160€, sometimes on sales using coupons and points, you can get down to a hundred Euros on Aliexpress (I got one for 102€, but I use it in my Qidi X-Max 3). However, one downside of all solutions for Revo at the moment: It conflicts with solutions to use the Biqu microprobe II. I manually modified my coldend to make both fit, using a file. Maybe the best solution would be to design an adapter to use the Revo Voron coldend inside the SV08. In the new PZ-version, so the hotend automaticly becomes the ABL-Sensor. Do not forget to set the slicing direction to clockwise in Orca Slicer if using Revo. Standard is counter-clockwise. A counter-clockwise drawn circle actually creates a smal momentum unscrewing your Revo nozzle. Esp. using organic supports, this could cause problems.

I like the open source marketing of it. Its like the ender 3 in that it was good at first but fan be upgraded to be an absolute monster over time. 382 usd after tax on Amazon is great! I only print in petg.

I just looked and they did not allow my post of 3 stars to be put up online. What a rip off they do not want the truth to be out.. I am printing with petg and am thinking to stop. I love my printer just not sovol since they have to approve your post before it goes live. I am 70 years young and have been an electronics engineer for over 45 years but now retied. I own 6 creality printers and thought it was a good idea to get a cheap voron since money is now tight. anyway keep up the great work.

I might buy one if it was sub $300 like $299.00 or less. I have an enclosure coming for my solvo 8. I prefer printers with closed in units like my 2 K1 which are my work horse for abs and asa

I just got mine today and it came with a damaged cable on tower 4 and also on the base plastic for tower 4 was bent and I could not even get it in. I took my heat gun and plyers and straightened it out and got it installed repaired the cable and it is now printing. So they really need to up there QC.

I was in the market for a 3rd printer. Since I can't find any 100% indication of what's going on, I purchased a different printer yesterday. I literally had this in my card awaiting the paypal confirmation. I then read about the long wait times and decided to pay more on Amazon, pay a little more and get it early but I then couldn't find enough information about the Nozzle issue. I tried getting into the facebook group to ask but they took too long to approve my request to join so I just got another printer that doesn't have these issues.

what thermal paste or glue are you all using on these hot ends. I am swapping mine out as my current one keeps under extruding like there is somethin in the nozzle. I have cold pulled it and i can push filament through easy but when I run 100mm test I get only about 75-80 through. I have tried using it like it is by upping the flow but still no dice. They sent me a second one but pulling apart the original there is white thermal glue or paste that semi hardens I want to put the same stuff or similar on just want to hear what you all are using.

I'm going to give it a try. I just went with plain aluminum. I want to use Revo CHT nozzles.

Does everything fit? Or do we have to redrill something?

LMAO.. you where gunna powder coat a heat sink? Hilarious.

Let’s see some results with the upgrade. Personally I am waiting for the Micro Swiss offering. I think it’s a flowtech first and hopefully a NG conversion later.

PCBWay what's to charge me $280 plus for 4 3D prints

This printer is for me.

Can you please provide some details on the specific options you chose when ordering the Revo adapter? Specifically, what type of aluminum? Did you choose threaded holes? Tolerances? Surface roughness? For the finish did you do bead blasting and anodizing or just anodizing?

Paste and copy…Creality! Oh Display Not top left…..K1 C! SE…..

Idk why people talk shit about it, I think it's a great option for people like me who love corexy but never print with anything other than PLA & PETG.

WTF, my default profile for the sv08 has 21 mm3/s of max volumetric speed

Hey. Holding together the PTFE and the cable harness of the extruder, what are you using, zip-ties?

lol both my ender3 and N2s with CHC nozzles do 20mc flow with PLA, those hotends cost 4$ on Ali!

I have exactly 1 Creality printer and it is the only one I will ever buy. This company just rips everyone off and produces junk.

All these companies trying to reinvent the nozzle. Why not just use a set up that accepts volcano?

When i get my SV08 i will let ya know which hotend i get with printer. Thanx 4 sharing & keep up da Awesome work.

I don't plan on using PETG so hopefully my SV08 should be good to go But is good to know just incase i do end up using PETG. Thanx 4 sharing Bud.

Glad Sovol is sending you out new nozzle & plate. I see there is a Revo upgrade will be looking into that 4 sure. Thanx 4 da update Bud Keep them vids coming Cheerz.

Thanx for making this vid. I just bought a SV08 & hope i don't run into same issue. Purchased 31/07/24 getting shipped on the 20th not off to a good start. Maybe i should also order a nozzle from now lol. Is there anyway of upgrading the nozzle & hotend or even the whole extruder with hotend ?? Am from Melbourne Australia just thought i would let ya know. Also subbed & thumbs up Bud.

Any update yet?

I recently bought one of their Threaded Nozzle sets for my SV08, thinking it was probably Volcano compatible since it seems to be around the same size as a standard Volcano nozzle. However, upon further inspection, these "new" threaded nozzles seem to reuse the nozzles of the SV06+, which were not compatible with Volcano-style nozzles due to the tip on standard Volcano nozzles being much shorter. There might be some configuration magic to make it work, but I was hoping for a drop-in replacement. Please keep us posted on when you get your threaded nozzle, so I can decide whether to cancel my order and buy one off of PCBWay, as someone seems to have designed a proper adapter there.

sovol sv08 no power will not tern on

im hoping that putting in an E3D volcano with a smaller heatsink shouldnt be too difficult

Who the F pressfits anythign in a system that undergoes rapid heating and cooling cycles? Also M6 Nozzles are abundand, and even nozzles with integrated Tube are already a thing?

Not surprised the hot end is crap. If I were to buy this, i would plan on replacing the whole toolhead. But i will not buy this. Toodon just needs to come up with a Canbus version of troodon 2 and kick this to the curb.

I ordered a sv08 a few weeks ago, shipping at the end of the month they confirmed the petg issue is resolved, and I will let you know what hot ends I get with the printer :)

Have you tried the bambu Lab hotend mod?

Dosnt expected this ... Seems real ... In Storage : 27.09 ..

why tf theres a petg part on the hotend

I'm not buying sovol08 until this is settled...

I got my printer yesterday (ordered 24.07) and the stock nozzle is still the old silver one (no thread or bronze) but ordered the new hardened steel nozzle and hope it will arrive shortly. Does anybody know if I have to have a failure one the nozzle to get a replacement with the new one?

I swapped my SV08 over to the bambu knockoff hotends. It was a really simple swap. The peace of mind and hardened steel nozzle was well worth it.

Press fit nozzle? Such a bad idea. Every other printer is threaded or witha grub screw.

This doesn't make any sense, its not even close to the price point of the Flashforge 5m... I have had 3 K1 printers, returned every one of them... I have had my 5m, not one single issue, just prints (don't believe the crap about the build plate, just wash it with a quality dishwashing liquid and apply some elmer's purple school glue ( this protects the build plate from PETG and TPU and makes PLA just stick!)