Видео

Yeah you can hear it a bit for sure. However my wireless mic was attached to me and was sitting inches away from the rifle which is why it was so loud on the speakers. Keep in mind I’m only shooting my SSG10 from a minimum engagement distance of like 40 meters and upwards of 80 meters which is absolutely impossible to hear this SSG10. I’ve done some sound tests with people and they couldn’t hear anything from even 20 meters. Also keep in mind that I’ve recently swapped my long outer barrel to a short outer barrel and place a novritsch suppressor over top which has helped suppress the noise even more. Either way, the tac41 I’ve heard is an amazing piece of machinery!

Yeah not so much spiders but ticks, 1000% haha. Up here in the prairies during summers, Forrest areas are covered in ticks

Attach a kill flash. I use a Novritsch sniper scope and they also offer kill flashes that screw onto the front of the scope. Direct bolt on which is nice. However, I felt that it blurred the scope vision slightly so I stopped using it. I've never been spotted because of scope reflection, though. Mostly due to me being so far out from enemies when I'm shooting. Another method is if you don't want a killflash, what I do now is put Jack Pyke tape on the entire scope to camo it out and then I take shoo-goo and glue dyed green leafs onto the end of the scope and have the leafs extend past the scope, if that make sense. Just helps get rid of the natural shape of the scope to help it stay hidden

@@airsoftstini, thank you very much for the feedback. I'll go with outfitting my scope with the tape and leaf trick. Your gonna think this is nuts, but I am a deer hunter and hunt with my suit. I'm just worried ying about the small crap lol. It was either the suit or a blind, to me deer deserve better than a blind. Not to mention I LOVE the challenge.

I think it’s all very situational. My tips were more so a more realistic look at how I hide in a ghillie during airsoft gameplay. Marine Corps Scout Snipers probably do things differently because they’re set up In hide positions 100x as far as an airsoft sniper can shoot opposed to real steel. Always gotta take that into consideration that in airsoft, most of us snipers are looking for targets only 70-100 meters out

Hey man, fully upgraded VSR or SSG, they shoot basically the same at the end of the day haha. VSR’s are great though. I just love that my SSG10 now has the A3 stock so it’s extremely light weight

​@@airsoftstini they shoot the same, because its a vsr10, and thus comes with all the avandatages/incovenient of the vsr. The only thing i would change to your rifle is adding 2/3 barrel spacers (im retarded, so all my builds have like 6)

The taps to their head just indicates a player melee.

Nope, don’t waste your money. I made this mistake when I was new to ghillies and it was the biggest waste of money ever. Being that they cost around $80-100, you may as well save another $200-300 and get a KMCS suit or a novritsch ghillie top at the VERY least. Whatever you do, save the cash and don’t buy an Amazon suit. It will not blend well and you’ll get EXTREMELY hot wearing it all day as they don’t breathe well at all

@@airsoftstini ok thanks

I believe you’re supposed to oil the wasp piston o-rings and rubber seal upon instructions from their site. Just to make sure it has more longevity. I wouldn’t say that, greasing the spring or cleaning the barrel will do anything in regards to increasing fps. You should clean your barrel out with rubbing alcohol the night or day before a game day, every time. I shoot at around 1.7J / 340fps. I don’t mind this because I do run a tridos TDC and with the flamingo bucking, I can still hop 0.43g bb’s like crazy. Because I sit at such a low Joule, I have much less minimum engagement distance in my field. If you want to get closer to 3J, I highly recommend a heavier spring. Keep everything as is, just get a much heavier spring. Something along the lines of a 2.7 or 3J spring from empire airsoft

Yup! From the research I’ve done, I don’t think a new barrel makes much of a difference. Just make sure it’s always cleaned out before you hop on the field for the day. 60 degree flamingo bucking paired with tridos pro TDC and a wasp piston makes it an entirely new experience to play with

@@airsoftstini nice, might hold off on a new inner barrel then, I tried my mates crazy jet in mine for a day and i got lots of inconsistencies, stock was noticeably better, I run a MR hop 60 but its already warn so going to try a 70, tridos pro and the stalker piston and a rapax 3j spring

@@gameswithprawno7007 yup that will be an amazing set up!

Hey! I actually still use the M150 spring. When I chrono'd last, which was a while back, The joules and fps dropped significantly. I remember it being around 1.6J / 330fps or something. However, it shoots 100x better than a completely stock SSG10 at 2.2J/460fps

For sure! Selfie cam: Novritsch barrel gopro mount Head cam: GoPro elastic head band mount. Then I ghillie craft both the selfie cam mount along with crafting onto the gopro head mount

Thank you! I see alot of people attaching the gopro through mount on the boonie. Makes the boonie quite unstable though and the novritsch vented boonie doesnt have a chinstrap. Will try with just using the headband and a hole for the attachment point to go through👍

@@aureliusairsoft I actually pre craft the gopro strap and place it on top of my balaclava rather creating a cut out. I know guys like airsoft cam man who use boonies place the gopro strap on top of the boonie rather than underneath

It’s extremely quiet because of the sniper mechanics WASP piston. A must have upgrade

UK/Europe - Empire Airsoft USA - Amped Airsoft Canada - Niagra Quartermaster OR Ghillie'd Up

@@airsoftstini appreciate it, amped says out of stock sadly 😭

@@hendriks9072 shoot ‘em an email and inquire about lead time!

From what I remember when mine was stock, it did have a bit of a noise from the spring area similar to what you’ve mentioned. As long as it’s shooting straight and performs as intended, you’re good in my eyes! I would seriously look into purchasing in this order: - Tridos 2.0 SSG10 Pro TDC & 60 degree Flamingo bucking - SSG10 WASP piston - Shortened SSG10 outer barrel + Novritsch SSG10 suppressor - SSG10 spare mag holder - optional: SSG10 A3 body / skeleton (makes your SSG10 suuuuper light weight! You’ll have an absolute monster of a sniper that out performs a stock SSG10 by miles!

@@airsoftstini thanks so much I’m literally buying all that now! Thanks for the great advice

@@airsoftstini just wondering, but because my field requires me to put 0.2g BBs through the chrono should I be using the heaviest or lightest setting for the wasp piston (im shooting 0.4g BBs)

@@phantomforce8242 I highly recommend purchasing a chrono of your own or borrow somebody’s when you have time to tech. Try different weight/air break setups and go from there. I think I’m using the heaviest weight and the medium air brake and I know with 0.40’s, I was running something like 340fps. Sounds super low but, this is where if you want, you can add a heavier spring to bump up to something a little closer to 400fps. Even tho I shoot at 330fps, the SSG10 upgraded shoots miles better than a 2.2J, 460fps stock SSG10

@@airsoftstini thanks so much! and glad to find a creator who communicates to his fans im definitely going to stick around for more vids like this. and once again thanks so much for all the help

You can ship to USA and Canada

Hey man, I've actually used 0.46's a ton in my SSG10 when it was completely stock and didn't have issues. I def don't think you made a mistake but, I feel like 0.43's is the sweet spot, at least for me. I run 0.43's right now as I feel it's just the most consistent and I don't have to adjust my Tridos TDC as aggressively on 0.43's

Hey man, it's been a minute since I chrono'd my SSG10 with the WASP piston as my season was cut short last year and barely played with all the upgrades. However, I wanna say that the FPS dropped actually substantially. But, because I'm running a 60 deg flamingo bucking and Tridos TDC, I have much more accuracy and range than my SSG10 did with the stock internals at 2.2J. I will update this for you in the coming weeks when I'm back out on the field

@@airsoftstini thanks so much!

M150 spring, 2.2J

Yup, big time. I only ever use cable ties. Where I play, our outdoor environments are heavily brushed and the pins wouldn't ever stand a chance

@@airsoftstini so you buy the 50 leaves and attach them with cable ties? Isn't it better then to just buy the leaves somewhere else? I've got a guy that makes his own leaves and look/feel the same as the Novritsch ones. If you're interested ofc!

I believe mustang is sending me a pack to post a review!

@@airsoftstini nice

Anything from Novritsch!

Yeah man and it’s no disrespect to Novritsch whatsoever. I mean, I use a TON of their gear and love it! But, when you have hundreds of different products, there’s just bound to be a handful that don’t hit. And that’s just business, and I get it! I just don’t understand how they came up with that mesh, tested it and said ‘yup, this is the one’. The colours are so off, there’s maybe one green in the entire pack? Ditch the dark grey & tan colours, make 2-3 solid green meshes in the kit that actually react to sunlight or shadows then offer a wack load of cottons and cable ties. If they could keep it in stock, they would make a killing off the ghillie crafting community. What blows my mind is that Nov is a heavy hitter compared to smaller guys in the business like Le Covert and KMCS. Nov, if they did a ghillie crafting kit properly, could absolutely dominate the market. My unsolicited 2 cents, haha.