Видео

its a shame that you dont film the fitting and alterations of the cup holder instead of filming when job done, noticed you did this with the steering wheel change as well, shame

Hi ya, having just watched your vlog on cruise control,,, I've just popped out to av a look.. Oh my days.. I've got the terminals for both cruise & heated mirrors, only had the van 11 years.. Lol 😂 thank you..

Did you use the old bolt or did you replace with a new one?

im in the process of buying a 2008 master how easy is it to change a single passenger seat to a double seat many thanks Rob

theres a sticker on mine saying do not fill from overflow,,,, there is a pipe under the hood to fill it but am scared of over filling it? confused,com

Could you do a video on reverse sensors please. Mines dont work and dont know how to go about fixing them. I have checked the fuse though and all ok

is it a 6080gearboxcode?

Is the......all you can eat breakfast?

I have a Renault Master and I want the headlights.

Same here 13 plate master , water under the felt inside roof. I had no idea there were rubber bungs on the roof !!! That perish obviously and allow water in. Who designed that ?? Hope it is cheap enough to fix .

How did you remove the bolt that secures it?

Where did you get the aftermarket black twin drink/ pen holder from. I’m desperate for one in mine. Great video, that’s nexts weekends job, oil change!

Hey , channel is essential. You can't grow a channel by offering videos. Branding your channel is essential🚀 Your content is amazing! But your videos are not reaching out to your targeted audience, not Impression. You are not getting your video views, Impression, Subscribe. No Rank video. You should definitely try to grow a personal brand on youtube. Below I found your channel issue. of your channel There are many improv ranked places. if you want Can I talk about this?

Hola amigo! Gracias a tu vídeo descubrí que colocaba el filtro con la goma central hacia abajo y no cerraba bien la tapa, generando entrada de aire y mucha dificultad para arrancar el motor. Gracias nuevamente, fue muy útil para mí.

A quick shock is definitely best. if you go to gently the glass bends alarmingly.

Hey mate i have 2020 Renault master van semi automatic 2.3 l torbo diesel and i couldn't find anywhere on the manual boook on transmission oil change, how often should i change the transmission oil for my Renault master?

Film crew were in shot in the mirror 😂Nicely explained, to the point video. 👍

You're not wrong; the lights really make the front lok good. I've been wanting to do front fog lights for a while as we get some pretty thick fog/sea-mist in Cornwall. Ypur bumper is looking nice too (colour). I've yet to install my relays and fuse boxes for the additional electrics that I want to run. Funnily enough I bought a replacement ligt stalk as mine is getting worn; it wasn't the one with the front feature though 😢

Hello, witch car your seats come from ?

my enginewas rebult befor i had van. since got a vibration when rev or drive it. any ideas

That was useful. Thanks for that. 👍

Whats the service interval for a gearbox oil change?

Hi, could you let me know how you attach the lamps to the bumper please And I guess they fit from the rear? Cheers

Have you got a underslung water tanks? If so how do you have them set up? Cheers

Hi. I have a 2006 Master Automatic Motorhome. The engine stop warning light is flashing continuously. I have had it looked at by three different businesses; two said a faulty ECU, the last said genuine faults, but couldn’t find the codes and he tested it for three hours. It’s only done just over 30,000 miles and runs well, apart from greyish smoke for the first 5 minutes after starting. I haven’t got a clue what to try next , so any suggestions would be greatly appreciated. Cheers Tony

can you do a "How to" video for us? I like your videos. If you want, i can do a "How to change tachograph km back to km in KI".

Is it not harder to turn now with a smalker steerig wheel?

Mine won’t prime… any ideas?

thanks. wondering about this

.....earth/negative

Do you know where the cabin/pollen filter is on this van? Thanks

I have a wider gap on top right of the door than the left meaning when you shut the door it hits the top of the passenger door. Any ideas how thats put right ? thanks, Tony

I have always thought these were a criminally stupid design. This happened to me today but the broken bit has blocked the hole halfway down somehow.

Another great video 👍 it's worth adding that the sockets the door locating pins go into will be worn if the door has dropped. You can adjust these upward very slightly to allow for drop. If replacing the middle rollers use a jack to hold the door at the right height if you've no one around to help.

The rail is very hard to get ahold of! I had to buy one ripoff merchant on ebay for £250. I managed to find a second from a local scrap yard for £20! My side door isn't locking normally so I will try cleaning the pins, inspecting the connection points. Didn't know about the button the alarm does seem to go off at random. One note a mechanic told me to never put oil based grease on these types of rails. As the rollers are rubber, you should use dry silicone based lubricant.

Thanks 👍

Thanks for that - very helpful. How did you put the spare wheel on the back doors?

Hello. I will be grateful for a video on how to dismantle the gear stick to replace the leather on Renault Master mk2

Hi fo you know what size the locking pin is for the crank i thought it was 8mm but cant seem to lock the crank

I also have a camper with a Renault Master 2005 2.5 dCi. Your videos are very helpful. Thank you very much

Wish I had found this video sooner. I have all issues you mentioned! Jack points front completely rusted. Could put a fist in it after poking it with a screwdriver. Left side under panel, water got in and also rusted Also had an issue with the leaf spring holders in the back, they were also completely rusted and 1 side had a big hole in it. When they took them off for replacement, also a piece of the frame was rusted and got a hole in it. Could only get them as original parts at 120 euros each! Rear door actuator stopped working. Haven't looked at it yet. Headlights faded/foggy -> polishing cleaned them up nicely. Rear calipers replaced, one binded, the other was also gone pretty quickly. Squeaky multi-band. The rollers are super expensive original at Renault, so they replace the bearings which makes it good enough for now. My airbag also gives an intermittent warning. Sometimes it goes away, but usually comes back in 10-15 minutes. Haven't looked at a solution yet. Also the combined light: glow plugs and that wavy pattern will be on after a cold start, but after getting up to temp and restarting it's gone. They measured the glow plugs but said they are fine. No engine error reading the OBD port. I also had some trouble having a spare key made. 2 guys couldn't figure it out, even though the key was read correctly, and only the 3rd guy fixed it by putting the key code directly into the EEPROM. Ventilation panel light bulb blown as you have shown. Heater resistor problem: setting 2 of the ventilation no longer working. There seems to be an issue also the the wheel levers: I had a problem on the light switch, the light would just go off sometimes. Also the indicator to the left didn't work all the time. The other one for the windshield wipers is particularly prone to have the interval setting to break. I've seen this on a couple of vans. Luckily replacing both levers is doable in 1 hour, and they are only about 30 euros each (if you buy fake brand) Gearbox bearings worn after 300k, still a bit notchy after revision but will work for another couple 100k I guess. If you hear a rattling at low revs: around 1500-1800 they are worn. Don't buy or expect a 1500 euros or more repair. Clutch was obviously also worn, you can recognize it's when you have to give a lot of gas for it to grab on and it will stutter. I also had an issue where the bearing on the right drive shaft was worn. There is a blocking plate the holds it in place (20 euros original), but one bolt came out, and the drive shaft was grinding down that plate and had a lot of flex. Obviously the seating on the drivers side will wear, if it's not leather, from getting in and out all the time. You can get a replacement cushion on amazon for about 50 euros. It seems also the rubber seals around the front doors are not so great, so replace them if you see them wear at the bottom. The plastic steps at the cabin are also common to wear down and get holes in them. You can only find them second hand as far as I know and usually 50-70 euros. Also don't forget to look under them. If the rubbers are worn water will pile up under them and it will also start rusting there. I believe the alternator is also only 75A, so be careful when fitting a DC-DC charger for your house battery. It might ask too much of it.

Had the same issue on the left side of the van. Sealed it on the inside along the whole length.

What is the light type called? can't really find much about it. Will goto the store with it on monday to ask around.

Is yours a 2.5 or 2.2?

Hi new subscriber. Love your videos. Just wondering how much did you pay for your hubcaps ?

Hi I don't have the plugs. Do some vans not come with the loom ? Thanks

What is the oil flow'er? Thought most gearbox just bathe their gears in the oil. Mines an ex ambulance with 300k on it. I bought it from the same company that owned it since new, point being when i changed my gearbox oil i checked the level first and it was flush with the fill plug, i just did the same and filled it back up to the fill plug. It probably took around 2.7-2.8l

Great information thank you 👍

Thanks.

Planning a gearbox oil change this summer. This weekend I'm replacing rear anti roll bar bushings as well as rear discs and pads, will do the same one the front following weekend.