Видео

This is only 1/2 of what should be done

Neither of your control panel operation videos show the control panel on my Navarro spa. After F1 and F2 it goes straight to EP, and then I can only select 0 or 1. I can't get to St, Ec, or Sl mode choices. Your directions in the manual AND on your videos are FUBAR and fail to cover my model. What gives?

I attempted to set up the mode and now keep getting a or6F code and the water does not heat above 85

Why aren’t you answering customers’ questions here? Bummer!

I had the tub installed on 203V. The crappy owner's manual says After powering up....press and hold the Jets button for 30 seconds to get to reconfigure the firmware from LL1 to LL2. This doesn't happen. WTF is wrong with people?

My coverlocks broke, they are cheap plastic. Purchased new ones but confused on how to install without cutting the straps. Please advise.

This is not helpful especially when the instructions are so terrible

This doesn't tell you "How To" install the cover lifter at all!

0:28 - is it true that the jet pump will only turn off if the hot tub is at temperature? if it is heating, the jets will continue to run?

I just set up the ls100 and the jets are never fully on, they pulse...so they are off for ten seconds then theres a burst of jet then its idle again..then it bursts again. Im not sure if this is normal and if not i have no idea how to fix it. Its brand new!

What happens when it displays everything but still works?? New controller?

How do I set the clock time?

What does it mean if you hold down the light button to set filtration and F1 doesn't appear?

My outdoor temperature is about 55 degrees. What mode is the best mode to keep it at 98 degrees. ST, EC or night time?

What is meant by 4 8's below the 5 symbols

When we get to ST and push the light button EP0 then push the light button again F comes up push it again and the temperature appears. What is EP0 mean and are we doing something wrong?

Derp

WHERE HELL IS THE INSTRUCTION MANUAL?

WTF is this?? There is nothing in the manual about doing this. Please respond

Not enough details on "how to".

What is ep?

Wrong instructions. Righty-tighty for ON (at least on my Aquaterra Maderas)

All the Lifesmart hot tubs are extremely similar to Aquaterra, now I'm seeing it's the same guy doing videos for both. In the same clothes, probably the same videos with a different logo. Why do they need two brand names?

How do you replace a small jet if threads are broken in fitting (Part Number: 78419)

Which code represents STANDARD.....?????

Me Likey

Artic Spas don’t need any foundations, that’s why they are superior.

You forgot a one way valve and a Ozone diffuser

I held the heat button till or5 was displayed. If I hit the plus button it went to or6. What do these codes mean? I was trying to override the heat so it goes 1 to 2 degrees over 104.

How often do I need to sanitize?

*We bought one of these a little over a week ago and have used it daily🌼 **allabout.wiki/Essential** We love how easy it was to set up! Things to keep in mind is it takes a day or two to heat up to max temperature when using cold water to fill it. Also, if you use the bubble jets, it does cool the water down some, but the jets work really nice! The hot tub has been perfect on our patio. We also bought some anti fatigue mats to go under it so we did not feel the hard concrete on our patio. I would definitely recommend this product!*

Mine works too. I used the Woodglut plans and performed it without any problems.

This doesn't help folks who have an older model.

How long does it take to heat up? I’ve had it heating for like 4-5 hours and it’s still 76* degrees. 😩

When do you do this? Before you begin using?

why can't chemical floaters be used on this spa??

can i get a pdf version of this owner's manual?

! tell the truth stop misleading the public. 220 is much better especially in the north when its below freezing. if you want to keep the heat in the winter you need 220

Is it necessary to keep the excess ozone tubing or can you shorten the tubing to fit?

I bought this spa brand new from Costco. Do I need to do this or is it already hooked up ? Any thing else I need to hook up ? Besides the obvious like plugging it in

Oh great, so you dont get any heat with a 110v unit. You either get no heat or its takes a long time to heat up.

Hi there! I have a problem with my Benecia Spa but I am in Mexico and I have not found someone to repair it so I decided to do it. How can I contact you?

The 4 Button Control Panel on our Aquaterra Spas Adriana 21‐jet, 4‐person Spa isn’t working. It’s not displaying anything. How could I have that fixed? Is that something I can get and replace myself?

Hello, I'm looking for the specifications and owner's manual for AquaTerra Aviano. How much does this weigh?

En Mexico se vende este modelo?

like give me

Just got this cover lifter but this video doesn’t show you how to install.... just the benefits. Change the title.

We use it for sex games

How long is the GFI plug?

My wife and I were so disappointed after completing this alteration exactly as shown, the one jet that we always fought over to put our feet in front of now has no water pressure hardly at all coming out to even make it worth being called a jet