Видео

Hmmm make one maybe?

Good information mate ...

Great advice Dug mate

Hilti are now basically a hire company. They make it so it has to go to them for repair. Breakers for example they electronically go into "service mode" and won't work. There's no other way to service them than to send it to Hilti. AVOID HILTI!

I had this video pop up. Wow that guy was lucky! A loose bolt caused this. ruclips.net/user/shorts550LqYWrRSU

had a customer bring me a mower hit a man hole cover lets just say that was the end of that done its last stripe 🤣🤣blade was like a banana and the shaft was too

luvly little tip liked and subbed 👍😃

Excellent, my neighbour took his Stiga engined mount field to a service guy who said the engine was “knackered” and he doesn’t work on “cheap Chinese motors” (thought they were a Polish/Italian brand but never mind). This was the issue, did the paper test. Now working great again! On my neighbours one it appears the main issue was the plastic mount for the cable at the top of the handle had come loose, causing some slack in the cable meaning it’s only actuated the latch 25% of the way, not disconnecting from the kill switch tab.

Nice to see you working on a variety of machines

Yeah, I’ve tried that and it stripped the threads!. If it just pulls out I’ll have a mess about. Wasn’t sure if there was a special way to get it out, didn’t want to damage casing. Thanks for the video it has helped.

Hi, how do you remove the metal nut that holds the long bolt that goes through the housing and bearing that is held in place by a small torx screw. Mine Won’t grad the bolt it’s worn. Looks like it should push out but mine won’t.

Excellent video.

I've gone thru so many of those heads from having problems with the gears which has lead me to switch from stihl long reach to other brands.. helpful vid tho 👍

Spot on. Thanks 👍

There no fun when they come off 😮😮

Great idea Dug mate

Good one dug mate

Is that one of them now hidro mowers lol

You fish it out lake 🤷 don't see how that engine could fill with that much water unless in was submerged in water 🤔🤔🤷🤷🤷

Looks like 0W-0 coming out of that valve cover! That mower has been scuba diving! Call it a Honda Fizzy!

Ta for my light mate . Its well handy

Good video Doug mate

Hi, im trying to take the 2 pinions out of my 145 stihl kombi hedge trimmer head. As the bearings have gone. Ive taken out long bolt and got the 2 circlips out the bottom pinion bu bearings wont come out. Any help would be appreciated. Cheers

Do you have a video of how to take the head apart to replace the pinion gear? Thanks

OMG you bloody legend i would come and give you an good old bottle of whiskey for this! For days and weeks I’ve tried everything. Changed oil, filters and spark plug nothing worked. Started today to dissassemble the carbonator but couldn’t get the last screw of so i screwed all screws back… THEN i stumbled upon your video and boy did it start! Never worked better than now actually. A massive THANKS for this!🎉 /best regards from Sweden

If you could mention cost of parts that would be helpful. Cheers

Great vid, thanks

Thank you. I almost disassembled the carburetor, but this saved my day.

Hi, this is a great video and I’ve tried following your instructions but I’m pulling my hair out. Might you offer a service to do this exact task please? Or do you know a company that can? Cheers

That's a cute thing! They make commercial walk behind blowers and debris loaders for lawncare companies now

Omg absolute legend iv had a mare with it tried everything thank you!!

Could have been good but the light is awful and should have been close up

The tine bar on my scariffier is nothing like this is there other videos available

Worked for me after trying to start the mower most of the day. Thanks

To be fair, that's probably the best use for that machine. 🤣

Wtf Dug 😂😂😂

🎸😂

There are some that are intentionally made with an offset.

Good one dug That’s what our mechanic does fixes things not just replace

Congratulations on your fixture well done

You got it

Hi where to buy the spare tines that fits it this model ?

Thank you for help 😊

Thank you mate, after weeks of agro from the wife it was a 1 second fix😂

Thanks for the vid, mine was a Stihl brushcutter, used a spring from my spare Stihl chainsaw carb and it seems to work. Had a bit of a faff with the butterfly had to slacken and re-tighten the screw to get the flap to seat nicely. I reckon I'll buy another carb for a quid from China to keep a spare spring in the workshop!

👌 would be nice to see what camera you use 👍

Great tip Dug

RAPESEED OIL. I have one electric chainsaw (14" or so) with overenthusiastic oil pump, so whenever I'm using this one (occasionally only, when cutting things "within the range of extension cord") I always pour rapeseed oil into the thank. Cheap (three times as cheap as regular "bio" chain oil), 100% biodegradable, and does its job. Also, I learned this trick from folks who use chainsaws much often than myself, and if they don't see any detrimental side effects then it's probably OK. (I do not see any either, but as I said, I use this saw only occasionally.) The only downside is that since vegetable oils harden when exposed to air for prolonged period of time the system has to be flushed with "proper" chain oil whenever the saw goes into storage - which again is pretty simple task. Pour out whatever rapeseed oil remains in the tank, pour some of the proper oil into it, run the chain for couple of seconds until you see that new, darker oil splashing from the tip of the bar, and you're done.

Europoor here. In soviet times, forest workers used old tractor transmission oil, which was boiled in a barrel on fire and skimmed off the top to free it of metal particles. If I'm not mistaken, the oil was tep15 and was very viscos, but since boss Karl Schwab doesn't allow it, and you can get a hefty fine for it, people now buy biodegradable chaisaw bar oil.

your customer ran that chainsaw without any bar oil in it. thats why the bar is blue. not because of using used engine oil