Видео

This was by far the best video I have seen to explain to his process. I have a basket case I have rebuilt from the ground up . The biffest problem is it cranks but won't start. Btw this is my first time ever being that far in an engine. And now I have something to give me hope again

From a retired mechanic nice clean and simple video 5 Stars>😎👍✌️

It's always a super great learn !! Thanks, Kevin 🍁 :)

Thanks Kevin , You made that look easy Sir !! Enjoyed & learned at the same time. Belt Drive , thats where i found the master cylinder rebuild kit for my gma forward controls out in Cally . Ol Boy name Scott i think it was , very helpful & knowledgable .

I'm on a Sportster ironhead, ive got some pics on my channel, but I'll stick around for a clutch replacement on a 5 speed, why not! Love Butlers. Im a fan for life!

Great job as always

Thanks for the great video. Very thorough. Would you please go into a little detail for me on the speeds sensor sensor? What does it do it do? How is it related to the other components you replaced… rotor, stator rectifier/ regulator? Many thanks! BA ‘06 Road King

Great video. Very thorough. Would you please tell me more about the speeds sensor? What does it do? How is related to the components you changed out like the rotor, stator, Rectifier/ regulator. Many thanks. BA 06 road king

Had a friend wrecked on a trike one rear wheel hit the curb goin around a curve and flipped it

Merry Christmas and Happy New Year !!!!

Hello Mr. Kevin !! Looks like You aint gonna run out a something to do for awhile !! Just watch this video , & wanted to say Hello !!

Make sure the drain back holes are drilled all the way through> Had that happen once on a set of S&S heads and oil builds up in the top.

Merry Merry Christmas

Merry Christmas to you all.

Amazing assortment of bikes !! Great knowledge. Very best in the New Year to the Butler Family. :) 🍁

Merry Christmas and Happy New Year to you and your beautiful family! Love your channel and wishing you much growth and success. God bless!

Marry Christmas and Happy New Year

Hope you and yours had a fine christmas

Merry Christmas Mr. Butler. My mum says Merry Christmas, too.

Merry Christmas Butler Fam! 🌲🍀🎄

Aww man I wish you had done the cam bearing also I’m going to do this job soon on my evo thank so much for your post , I have a 1998 fatboy carb evo .

Merry Christmas brother to you and the family!

Do you use the OEM mount or aftermarket..........? Great video"

Just found you and boy am I glad I've got a V65 but am in the UK mine has completely been stripped now having a replacement engine and frame as well so it's all in bits and I need to see how these things go together so getting a lot of info just from looking at the one your working on I've had it for a few years this is all gold dust to me many thanks for sharing on this one have to ask what manual have you used ? because I have found the Haynes one of limited use to be honest .👍

Were those adjustable push rods? Sure looked like it.

I have a 2011 Road King. It only has 28k. How long do the tensioners usually last on the “newer” vtwins?

Merry Christmas I'm looking forward to the New Year and visiting Tennessee again! Very best 🍁

Hey man, I don’t have a twin cam, but I learned a lot. When you pulled that rear valve cover off just so easy I bout cried. Took me forever to pull the rear covers off my Evo when I changed the cam and shot lifters. I still don’t know how I did it

Hey Kevin, I changed my tensioner shoes out on my 02 Duece last year. My engine had 22k on it and the shoes were shot. I used the Cyco pads. I also changed the two cam bearings out in the engine case. It was recommended due to the fact that HD cage bearings were prone to falling apart, so I decided to use caution and replace them. I did all work myself in my garage except for the inner shoe & bearings. I didn’t have a press nor a bearing puller. BTW, I love your videos.

Hey Kevin, I changed my tensioner shoes out on my 02 Duece last year. My engine had 22k on it and the shoes were shot. I used the Cyco pads. I also changed the two cam bearings out in the engine case. It was recommended due to the fact that HD cage bearings were prone to falling apart, so I decided to use caution and replace them. I did all work myself in my garage except for the inner shoe & bearings. I didn’t have a press nor a bearing puller.

Is there any way to see the inner cam shoe tensioner by just pulling the outer cover on a '07 Softail I think I'd said his was an '06 but we couldn't see the inner cam shoe is there an easy way to look at it or do you have to pull the support plate. Thank you

👍🏼👍🏼👍🏼🌲. I'm helping a friend put a 103 top end jugs Pistons used on his 06 Softail.. several years ago I put a carburetor on it for him because he took it to several Harley dealers and it never it would only like limp home mode something to that effect. I mean it wouldn't take any throttle. Backstory on it it was a bike that was in a fire a very very bad fire. Most of the wiring harness I was able to repair in the end I bought another used wiring harness just to maybe that was the problem it always had problems with its throttle position sensor map sensor all those kind of codes and two Harley dealers said just buy a new bike from us and we'll work on it this winter. That's what prompted me to say hey let's put a carburetor on it which we did and I'm used to carburetors is that pretty much all I have. Cuz I have a couple of shovelheads. And we put a standalone ignition module that judged were the motor was at through the crank position sensor and around fine. But he's already put a 103 on there and bought some used Pistons and jugs. So this ought to be interesting I enjoy your videos thank you very very much you also wanted to put a woods 555 or a 222 cam in it I told him let's put the jugs on first and then if he wants to do the other later we can.

👍🇺🇸

Really liked this one. FYI, the bike runs GREAT!!! Merry Christmas to you and the family.

Great video and love your style. Literally step by step how to. Just what I needed to see. You have a new subscriber my friend! Keep up the great videos.

had this set up it stopped working so I converted to carb, Your channel has been very good info

I have a twinky not charging lets do this

I definitely feel like this is what I need for my bike 2000 roadking it has the worst time starting , I’m just on tht starter button for a good minute and back fires… previous owed says sat for while when he had surgery so I’m sure its all kinds of gummed up. I’m going to try to do this over the winter appreciate the info

Vic in Wyoming im doing my 89 tour glide doing 25 over an cams jetting full exhaust an chain conversion love watching your videos im, 71years old an love to ride now 51 years on 2 wheels

Always a joy and more important a real down to earth no frills tutorial. Thank you from the other side of the big pond

Why is most people say to replace their head bolts/nuts cause their stretched ? But you reused them isnt that bad just curious learned more from cars and we always replaced them?

Perfect timing this is on my list of winter projects thank you for posting!! Your how to videos are the best out there!

Thank you, sir ,for making another great video. You are the best !

I had an 84' V65 Sabre. Having a 121 hp was awesome!!

Mink oil might work as well

Not everyone can teach or instruct, it’s a gift and you definitely have it my friend!!