Видео

Excellent video and information. Thank you for sharing. 👍👍👍👍

When using a rocker switch in conjunction with a fuse panel, the 12v supply to the switch will be from the fuse panel then the output of the switch will be to the accessory?

How about putting a small U shape channel on the bottom of the door, on the inside, and slope it back to the hinge, plus a bit further so when you open the door the water runs down into the channel and drains back into the cabinet. The black rubber membrane could still be used, sandwiched between the channel and inside of door - just a thought ? Have seen other plastic bins used as cabinets, even angled at 45 deg's to get the viewing slope right but this looks great - looking forward to all the details, I NEED to make one of these ☺

Great job Chris. I was inspired by, and 'borrowed' heavily from your first version when I built mine and I have been extremely happy with it.

Glad I found this. I have a 21 RMAX2 and have the same windshield. It seems that the wiper motor assumes that it gets grounded when installed. Did you have to run a ground wire to the switch?

Great video!! I was about to buy a $200 screen replacement. Change my mind, and I'll try to fix it now.

Thank You!!!! Very well explained.

That will fog out the Bugs!

Only one, one way valve? You didn't use one on the driver's side as well? Great video!

Thanks for the video Chris - however I have some questions: I have a 6 gang niLight switch gang - I m not positive on how to hook it up along with the relays?? Do I need 6 relays ? Thanks Mouse

awesome homemade forge to heat up metal pieces

bro, that is the best way to make a homemade smoke bomb! i wish i knew about this 10 years ago

How/where did you mount the cans? Your locations seem better than inside (battery, fan shroud..).

99677 is the Blue HF Glove part number

Just got back from World Famous MOAB DOMINATED THE TRAILS PERIOD !!!!!!!!!!! . Went as soft as possible on all Shock Adjustments. The Secret is throttle Control, in order not to ROMP the RIG, Picking the best line, Trust the Yamaha Engineers work. Went about as close to Vertical UP And Down over 30 feet as can Imagine. No Tire Slip at all. Stock Tires reduced pressure by 4 LBs per tire. Went up all obstacles like VELCROW Both Wet and Dry Rock What a Machine!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

geez almost no one says what amp Fuse to TOGGLE relay ... 5, 10, or 15 amp ??? to safely trigger relay with out burning up relay coil.

I have 2 CCA main power wires in my vehicles and they're working just fine. I think it's more as you said, this was a side by side, so open to the weather. Also, I liquid electrical taped every exposed bit on both ends and then brushed on dielectric grease after tightening the connections. I also actually maintain my vehicles and keep my battery posts clean, so that doesn't hurt either, lol. As a mechanic for over 20 years, I've seen hundreds of 100% copper OEM battery cables turn to dust around the terminals, sometimes for 6 inches up the insulation, just like that. Under hood installation, especially on a battery terminal, is basically worst case scenario for an electrical connection, regardless of composition.

So are the actual pos/neg from the accessories going to the fuse box or it it just for the rocker switch? Or is it both. I just had 2 relays crap out on me and idk why.

I like that you built a shooting bench that has wheels. I need one with wheels myself as well. Hope you don't mind if I use some of your ideas hwen I finally make mine. Have a great weekend. Enjoyed a full-watch. 👍🏽🤠 05/19/24

Please what's the wattage of the blower?

Look forward to your progress! Your old Venom Blaster is working great!

Where can I learn everything you have learned ????

Great video. Thanks for raking the time!

A little Mt St Helens style smoke

HE DIED

No wonder earth is how it is.

can this set up work on my 2014 ford f150 3.7 ? [not ecoboost]

Sounds like a tornado. I bet your neighbors will be glad when this gets old. It's really impressive, I have to ask what's the purpose of it all.

Bad news, I spent $1000 on barrels this month, good news I have this sweet new katana I made! ‘MERICA!’ I guess… lol

Not familiar with that exact product “Cab-o-sil” but quite often the fillers used for epoxy and fiberglass work are microscopic hollow glass spheres. They are very lightweight and chemically inert to any of the solvent in whatever material you put them in. They are particularly used for epoxy glue ups because they help maintain a minimum gap so that when you clamp the parts together you don’t squeeze *all* of the epoxy out. They are also used to lighten the overall density of resins in composite work

Hey Chris... I built and added the door scupper w/drain that you suggested. Works great! Jeff

This was so freaking cool, I i had to share it

60 percent energy flow CCA. Copper is about 99 percent energy flow. Do the math.

Pay good attention to what Chris has learned and thankfully shared with the RUclips crowd. Why? Because Chris offered this unit up for sale (In order to build his next version), and I purchased this unit. Everything Chris learned he has shared. This unit is exactly what he has shown you. I took his unit, did a couple fiddly things to it, and started vapor-blasting the crap out of stuff. The unit is.... Well.... Pretty damned good! I don't have time to do a three-year development phase. I also don't have the budget to buy a pro unit. But I am lazy/smart enough to use what Chris learned to my advantage. This is a great tutorial.

Thank you for your excellent review/install of this bumper. I purchased the same bumper and did exactly as you explained.

Do know where is the location of the fuel filter on this trucks

Had everything hooked up, fuse box to 200a relay, worked good for 3 rides and then something quit on me, for some reason my main rzr fuse panel the accy fuse was blown replaced it and still nothing

Fantastic explanation. Very well done, sir!

habemus papam

Where did you get wiper motor from?

ALL households need one of these!!!

Now that's an incinerator. No messing around!

You should improve on the design with some mechanism that constricts the exhaust flow like on a jet fighter.

This video saved me so much headache you don’t even know thank you lol

So i was wondering why no copper clad wire?

Awesome video, thank you! Very educational

Very good explained, \how relays work now it is more clear for me. Thank you

I got confuse on the relays 32:20 ok then if the fuses only activate the relays and then from the relay goes to the switch, how does the switch is getting the positive and negative from the fuse if the wire from the fuse is already going to the relay? I hope I explain myself good I’m confused @venomchris5818

Can I ask you why you used the shower drain? Do you actually drain material out of it or did u use it just bc it worked as a platform for the pump

I don't know why you would try to start it up with wet fuel. But if it was me I would get a fire going before starting the turbo burn .