Видео

I got them from amazon Spain "Placas insonorizantes". They add weight to the hard top but it helps with wind noise

So glad you found the video useful. We couldn't believe how much water got into the car!! It's a very bad design fault.

Thanks! For a small tear it's an easy way to do the repair. I'm amazed how long it has lasted. It's still perfectly ok now.

Yes! lol but I love both of them. It's hard to describe but the wooden steering is more than just the look. The car takes on a whole new feel when driving with it.

@ i got an old Fiat 600 with a hard steering wheel and i know what you mean. But honestly the barchettas steering wheel really fits the car nicely

I think mine's the same. I'm going to at least start it up every few days!

Yes, I think most testers would spot it so don't want to risk. Will put it back on at some point aa it does feel great to drive the car when it's on

In 2027 I might try for historic status then it won't matter!

Normally yes, they are there for ages trying to get the right reading but this time it was quick. Maybe the fresh fuel and the hours drive before helped.

The test centre is in the middle of an industrial estate no houses nearby.

Thanks. Yes I remember. Last year was a nightmare so this year I filled it up with 98 then drove for an hour and it was fine. Very surprised!

I tried that aswell, going onto the AP7, ripping it down to Benidorm then back up to Calpe before going to the itv, but for me it didn't work !

Better than I expected. A bit chuggy going up some steep hills but I think that's just old fuel.

Thank you!!!

Thanks for you comment but it does not translate correctly and I don't speak French. Sorry

Fantastic. Remember you can also change the colour of the leather which might be another video at some point. Good luck

Yes, could be better. AI needs to try harder!

Hi glad you enjoyed the video. The oil is 10W40 Selenia 20K. The oil filter is the Bosch P3300. Hope that helps!

I think it's all in the prompt. I wasn't too specific about body shape. Might try a different creator and see if the results are any different.

Yes!

Thanks. Glad you found it useful. I'm no expert but maybe check the whole air intake system and make sure there are no splits or damage to any of the pipes

@@pauliecabs I went back to the car about 30 mins ago and the warning light was back. I’ve cleaned the sensor again and left it instead of driving it, and I’ll check again in the morning. But thanks, I will try that if it’s not fixed

@@WDKYBand did you change the air filter?

@@pauliecabs I did that first before seeing your video. Changing the filter changed the error code, which is why I started google-ing the MAF sensor and found your video

It's crazy that it floods the whole car. We're in the south of Spain so luckily with the high temperatures and the vacuuming it did dry out in the end.

Thanks, I'm glad you enjoy them! There's this on the fiat forum which might help www.fiatforum.com/threads/fan-relay.492472/

@@pauliecabs Cheers paul, have a good one étc 👍 Curt 👍😃

Thanks! I know it's not to everyone's taste but wanted to try and do something to break up the black plastic.

A bit fiddly at times but turned out ok!

Yes, good tip

Full 25 minute video on the channel ruclips.net/video/8z3inNQYkhM/видео.html

Still there! I made sure to use 3M. The difficult bit is around the heater controls . I didn't know at the time but you can get new stickers for the heater controls if you cover them.

Im Planing to do the trim pieces of my dash. Have a tan leather Interieur with Black dash and inbetween is a small trim in plain silver. The woodgrain will look more like "grandpa lexus" than the silver but i like the color. Found the 3m foil you used. Good product is necessary with all the different forms and shapes

Would love to see the results. Send me a pic on instagram

Im an "old 30 year old" person, i dont have instagram, tiktok ore social media. Just youtube and facebook for a few car groups​@@pauliecabs

Thank you. I'm glad you enjoyed the video and found it useful

Maguiars convertible top cleaner. Check out the longer video on the channel. It works really well.

Hi, the headliner was bought from amazon. It was a kit that included the glue. There was 2m of material included. The small buttons were called KIMISS 50. I couldn't find any grey ones so I painted these. All this is from amazon spain. I don't think the kit is available anymore but the buttons as still there. Hope that helps.

Brilliant advice. Yes, you never know!

So glad to hear you've found it useful. It's not hard to do and incredibly satisfying when you see the results. Give it a try!

Danke fürs Zuschauen! Ich freue mich, dass der Inhalt bei anderen Hobbybastlern ankommt. Als leidenschaftlicher Heimwerker teile ich gerne meine Projekte und lerne ständig dazu. Wenn du Tipps oder Vorschläge hast, freue ich mich darauf! Ich spreche leider kein Deutsch, daher habe ich einen Übersetzer benutzt.

Yes I did and it's original not fibreglass. Had it for ages and not done anything with it but will be featuring it in the next video

Hi, I've done one on cleaning the MAF sensor but not specifically on misfiring. I had a quick look on the Fiat forum and and someone said if it happens when you lift off the accelerator it could be the throttle body needs cleaning. Hope that helps

What kind of edges?

Thanks. I know, I don't know how else to get in if the cable stops working

I'm really glad you found it useful. Thanks!

Hi yes, still have it. Will be making more videos again very soon. They are still quite reasonably priced but it's getting harder to pass the emissions test each year. Can't apply for historic status on mine until it's 30 years old which would get around that.

@@pauliecabs Ah happy you still have it! It's a little easier here in Italy. Historic status is after 20 years. I have an Alfa Brera now but that is staying for sure. If I do get one be sure to drive down in yours. I'm in north Italy, 30 mins from Turin. Look forward to your new videos!

The rear brakes were an absolute nightmare! I wish I'd thought to do the pressure test at the start but that's experience for you. I still have the old one but I'm going to hang to it just in case. You could try barchettaparts.com

Ho aggiunto per te i collegamenti per i cavi nella descrizione del video.

Ciao. Che adattatore intendi? Dimmi a che punto del video si trova e controllerò. Oppure mandami una email.

Yes it's still ok. The difficult bit was around the heater controls. I've seen some rings on ebay which fit over the controls and might help with the finish

I know lol. Too much dull black plastic! Might try painting or a hydro dip next

Sorry not an expert on this. It was the first time I'd done it. You could go up to 3000 and polish again. What don't you want to use varnish?

@@pauliecabs not against the varnish but I was wondering I made mistakes during the polishing? And how is the durability of the varnish layers? Is it last if not exposed too much of sunlight?

@@szabohunor91 just make sure you are thorough with each grade of sanding. Use 2k varnish for a more durable finish

Have you tried multiecuscan.net for help?

Yes, that's true. Or an Abarth version.

That's a good idea. Might be something for a future episode!

Not sure which bit you mean that is broken. Email me a pic if you like. The part that holds the light bulbs is separate to the tail part that I replaced

Had the same. Was cheaper to get the whole thing. Now have a spare bit for the bulbs lol

Oh yes!

For sure! There's so much people can do themselves and save a bit of money.