Видео

What was the mag I had in it last looks nice also does it work?

I'd see the incorrect 45 degree gas block with a straighter 5.45 or 5.56 magazine and laugh at your poor, dumb ass. Fucking poors. It's like you can't teach or talk to these retards.

Are there any metal mags that work?

I've had no failures with my AO carbine so far. I started by working the action a few hundred times and made sure it was oiled.

I have one. Seems pretty decent to me.

The surplus Polish fodder that I am familiar with uses a steel cored (mild steel instead of lead core), bullet. This might , of necessity, give them a higher speed, especially when fired through a PPSH, PPS or other machine rifles, due to the longer barrels.

Great video. Thanks for your hard work. a lot of time and money in this video

really? This was so dumb!

Can you safely carry with one in the chamber and the hammer not cocked?

I bought one of these, absolutely love mine, it runs great and have yet to have a jam. But charging the thing is just so ungodly stiff. Like you’re putting your full weight into that charging handle to bring it back and then on the original 35 rounders it seats the first round every time.

Well, that’s two minutes of my life. I’ll never get back.

i just got one from PSA. Mine came in what I'd call "very good" condition. the slide, barrel, bore, guide rod & recoil spring all are in excellent shape. The lower frame & grip were in very good; some finish flaking on front & back of grips & the rear of the beavertail was worn bright & slightly roughed up. FIxed that with some Birchwood Casey Aluminum Black touch up pen. Do NOT use Birchwood Casey Super Black - it doesn't adhere to the aluminum frame lower. Will work on anything on the steel slide though if you needed touch up on that. I ordered more brand new Beretta 13 round mags. Shot it once; feeds Hornady American Gunner JHP and ball FMJ ammo fine but on multiple times the slide would lock back with still one round in the mag; looks like the mag spring isn't lifting the final round up fast enough. Trigger is better than my Beretta 92FS. Sights are hard to see but doable. I got a Azula leather OWB holster (LH) for it. I'm happy with what it is.

Will any of the mags that work on this work on the hellpup ak pistol

I prefer my Russian Capture k98k to these things.

The grip just feels fat for being a 380. The cz82 grip is slimmer. The newer 80x is tiny in comparison.

nice condition, but the side panel does not appear to be original, it is missing the Hungarian communist socialist coat of arms

Nice pick up. May have to add one of these to my collection.

Ummm......maybe do a side by side with the Spanish FR7 (turned down bolt) or even the Indian Ishapore Jungle #7 in .308? 🙂 Then again, maybe I should as I have ALL FOUR. Oh, the good '0 days of collecting & having a FFL 03! Weeeeee

Bruh

Slant brake is useless.

لدي ذخيرة تشيكية صنعت عام 1953 لدي كميات هائلة انا من اليمن واريد نصيحتك.

So you think it will work for a hakim or a converted m1 garand

Worked good for 8mm Mauser man and readiness reviews

There is supposed to be a 1 mm gap between the stock and receiver , especially on woolen stocked rifles.

Heard that stuff runs hot haha

Almost got one of these recently but I was out bided 😅😢😂; such a cool pistol.

I have a few USGI Carbines , one being an M1A1 Paratrooper . I then bought an Auto Ordnance AOM150 Paratrooper . All shoot accurate and no malfunctions with 10,15 & 30 round mags . They are just light , accurate fun rifles to carry and shoot . I do prefer the mags with the good open follower’s but I have a duke mixture of GI and what ever I picked up along the way and all seem to work . Gun Mag Warehouse has a bunch and you can buy singles or they have the Korean KCI in 10 packs . Currently the 15 rnd. are $ 87.99 and the 30 rounders are 109.99 per ten pack . If you want a chest rig for your M1 Carbine check out Olongapo Outfitters as the have them for 15 round and 30 round mags as well as the. Butt stock pouch and some for your belt . If your like me , they also make them for Garand’s and AR’s and Ak’s and 7.62x51MM as well as pistols . Now if we can only petition PSA to add M1 Carbine ammo to their AAC ANMO line at a reasonable price ( like their 300 Blk) !!!!!

It’s the civilian sporting rifle in SA.

Once you go FULL Rhodesian there's no going back Mate.

Geez, it's just chucking those casings so far.

Nice little guns I've had a few

I got two that would not fit at all. Returned them. The 82 is a great carry pistol. Very accurate. Good feel in a small hand. A variety of ammo from Russian to U.S.

I bought one earlier this year and it was a nightmare. First inspection it was in very good condition, took the grips off, had a broken tab. Disappointing, but not too bad. But little did I know, the lanyard loop was loose which was odd. I compared it to images, and it was bent, turns out it was dropped and broke the weld for the loop, to the extent it could be pulled out. Luckily I managed to send it back, but the ulcer it caused was not refundable. A shame considering I've wanted a 34 for a long time. If it was not for that loop being broken, I would have been happy with it. Not the first bad experience with Rguns, my Type 54 had a loose rear sight to the point of being able to pushed out by hand, luckily loctite was sufficient. Bad luck seems like a habit for me. The arrow looked like a modification, but it turns out later 1934's (these were early 70's) have that from the factory. These unfortunately were rare guns before modification, they were guardia di finanza contract guns, they had 1/2" ish longer barrels than the standard 1934.

AKs just aren't made for that round.

3 WW2 models (1 paratrooper) and an Auto Ordnance. All have been great to shoot The only M1 carbine reproduction to avoid is Universal. Great in fully jam o matic. 😅😊

That pistol grip looks like a Bulgarian 74 grip.

Based on what I saw, they seem to feed fine, but don't eject well? I have a mix of mags like this- and I have one of my cz's at the gunsmith for feed problems. __________________ Your Shanghai Shivers joke! BLAHAHBLAH. Nothing like subtle hidden racism on youtube. Jesus man. You are actually doing some useful work here. Grow the fuck up and save it for, i dunno, stormfront. ___ So my question is: did you actually machine or work on the mags? get the ejection to work better? '

I didn't chrono it, but years ago, I had a couple of boxes of czech 7.62x25. This stuff was steel cased and came packed on stripper clips. The rounds felt really hot and they were steel core. The sparking against the range backstop was noticeable and set off a residual powder fire for about 30 seconds. about 25% of the cases had a split at the case mouth. I believe this ammo was made for their sub guns.

JRA's reviews are brutal. I have an older JRA under folder Norinco AK. They worked om it twice, never fixed the problem. My brother-in-law actually fixed it. I'm not that far from Burgaw so i just went in person. Second time some inbred redneck came out from back and said it was within tolerances? It works fine now but will be my only JRA.

Waste of time and life I’ll never get back

when WBPs are only a couple hundred dollars more, the choice is obvious

Have this same M 1 and it works great....even runs on my reloads...have installed special magazine follower plates with hold open bolt features.

el cesme hu chopo digo😂

ese es mi nino❤

Check out DF Gun Store (D&F Brothers) in New York. Almost a clone of RanierSEC. Suspiciously low prices, $100 minimum, and this huge red flag: “You will be required to send payment via Chime Pay to the address that will be provided to you.”