Видео

6😢

I know there are haters out there but I’m not one of them. Owner of the R26 and I love it. Owned it for several years now and to date it has not let me down.

Are these intended to be shot with mechanicals? Appears there may not be enough clearance for a 3-blade broadhead.

Looks like a sick bow. Recommendations I'd make are: 1) Common tool for removing the optic's cover and adjusting the ret 2) Build the tool into the frame somewhere, so it is always with the system. 3) Provisions for a sling, if they aren't already on there.

I just sighted mine in, same setup. The hype is real. Can't lie I was literally sick to my stomach for about 15 minutes of not getting it to fire. $3,000 price tag kinda influenced me to baby it. When I finally saw a video that one of the Ravin guys did saying it requires substantial pressure to seat the nock, I figured if anything went wrong I would just blame that video. I upgraded from a Fatal X which is a good bow, the built in crank I would have rather saved money on, it sucks, I stopped using it about the tenth shot. I will be a fine backup bow.

I’m new to crossbow’s, I purchased the lighted nocks they are great. People that can’t figure out how to fix the issue should not be allowed to use a crossbow or chew bubblegum!!! Did you people ever hear of emery cloth??

So happy 2 get back my R500 after recall . Thx a lot !!!

Junk crossbow

Crossbows can barely shoot 3 moa? Indoors?

“Rifle like accuracy” yet ladies still claim they’re “no different than a bow” so they can use em during archery season. Thankfully i got 30 years of archery without the lazy minions invading the woods every fall. The best of times in the 80s, 90s, and early 00s. A real golden era of bowhunting gone forever glad i was there.

It’s a cool bow, but I’m hoping they put some development into it to make it better. As loud as it clicks, it may as well have a car alarm that goes off whenever you have to reload. Every animal in the woods is going to know you’re there. The price (and cost of ownership) are also way too high right now. I was on the fence over whether to buy one until I leaned you can only fire their specific bolts, which are expensive and often unavailable. That was the deal breaker for me.

Another poor over priced product by ravin.

Just mounted this scope to my R10 and I'm highly impressed- the sighting in was easier than I thought. The glass is just as clear if not clearer than my Leupold's and I'm not exaggerating one bit. Ravin hit this scope out of the ball park for sure!!

A lot of engineering in this unit .

Will not hold bolts tight enough

Can we assume that Ravin has addressed the gripper problem concerning arrows not staying in the quiver?…surely you folks have read your own product reviews on your own site. How this quiver ever made it through with this problem and into mass production is simply beyond me and many others.

Definitely NOT worth what it’s sold for.

Wow Mantap. Benar benar Mantap

You're slow in the head for adjusting the scope before putting it in stand.

Can't mount good optics......lack of options, huge downfall

It's a good video but it looks like u are holding on & depressing that release button the entire time u crank the line back!

I have r-10 from 2018 no problems at all one the best crossbows for sure

😂😂 guy couldn't hit a bullseye from 20 - 50 yards .

For what that scope costs it should have a lifetime forever warranty just like the Burris Oracle X. ONE YEAR???????HARD PASS

for anyone who has used this scope, what are your pros and cons? Sorry, I'm not too interested in the crossbow itself, as I bought he scope and I'm going to install it on my R5X

So this video is about crossbow maintenance but does not cover any maintenance other than cold weather lubrication of the string. Awesome!

So you shoot at 10yds to get close, move to 20yds and sight in with elevation and windage knobs....got it. Go to 50, sight in again using elevation and windage knobs (if needed)? If you change the elevation and windage at 50, you are now off at 20yds....correct?

Paint the scope,it sticks out like a sore thumb I paint all my stuff, especially stuff that’s shiny Best~Regards

On your initial first shot…..to make adjustments for windage and elevation you wouldn’t even have to leave the bench. Hold the scope where you were aiming keeping the bow rock solid then adjust your windage and elevation to move the reticle to cover the arrow you just shot. The pre-calibrated tapes are in 10 increments just as the multi reticle scopes are. That being said you aren’t gaining anything by having tapes that are only calibrated for 10 yard increments. Why aren’t those tapes calibrated per yard just like HHA does?

So the pre-printed speed tapes are only good for 10 yard increments? If that’s the case, what’s the difference between using that and a scope with 10 yard increment reticles already in the scope? Your speed tapes should be for every yard just like the HHA speed dial tapes. The HHA system is 10 times better.

I got the R26 p+ Comes with 500 grain bolts. Don’t see it on Ravins website though

Use Ravin press on your Centerpoint cp400 (Same as ravin)

I went to a crossbow dealer recently and he told me replaces a ton more Ravin strings then he does Mission.

Sounds like a 22 rifle! That's insane! 500fps. Thats why it's so loud.

Love the sniper scope on my R26 p+

My R10X package arrives today…looking forward to sighting this bad boy in.

Mission Sub 1 ... i.e. Sub 1 MOA at 100 Yards, or Sub 1 inch at 100 Yards. I think there is a substantial Rival.

How do I get it to shoot 100 yards when it says 80 is max when I ranged my target

Nice facility…just bought the R10X package today, be here mid-week. Was looking hard at TenPoint, actually had ordered a brand new ‘24 model Viper S415 and it showed up with the lower RH-side limb delaminated mid-ways down the limb. To say I was pissed is an understatement…back it went for a refund and no more TenPoint thoughts. How in the world this thing ever got boxed up without someone noticing is beyond me, it certainly didn’t happen or get beat up in transit, box was pretty much in perfect condition. I hope this R10X does the trick! Liked and subbed.

You sucked at sighting that thing in! Plus red dots absolutely suck for deer hunting! bolts are too expensive. 330 feet per second is weak for a cross bow!!!! There's plenty of 180$-350 crossbows out there that shoot over 400 fps! I wouldn't dare waste my money on that thing!

Wrong excalibur is the pinnacle

Make limbs that don’t delaminate and lighted nocks that actually turn off first! LISTEN TO YOUR CUSTOMERS!!!!

I have been on hold for 8 hrs yesterday and almost 4 today and I need to talk to a customer service rep right now! The que keeps jumping from 24 ahead to 36 ahead etc! I need to speak to someone now!

You talked it to death but you are all show and no go. I don't believe it does anything but sit on a pedestal apparently.

Maybe make your crossbow limbs so they don’t delaminate and then I’ll buy one. Also, the customer should NOT have to pay shipping for a warranty issue.

A director of sales that's a good guy ....lol ...yeah right .

My turrets are impossible to move with my hands. And I’m not weakling. WTF?

So the sniper package has the adjustable turret scope. From what I’ve seen, the speed tapes are in 10 yard increments. Is this true? Or are your speed tapes every yard like HHA?