NEO RC
NEO RC
  • Видео 177
  • Просмотров 128 220
Redcat Gen9 - Fusion SE, Bumpers, Lights and Fuzzy Dice 😁
Nothing real custom but a lot a fun to drive on the trails. The lights seem to only flash on camera, to the regular eye, they don’t flash. Not sure what’s up with that but the lights that flash are controlled by the redcat light controller. The lights that don’t flash are directly powered thru the receiver.
Thanks so much for watching! It’s greatly appreciated.🙏🤙
#redcat #redcatracing #redcatgen9 #rccar #rcoffroad #rctrailtruck #rc4x4 #rcrockcrawler #rccrawling #rccar
Просмотров: 51

Видео

Gen9 Troubles and improvements
Просмотров 6321 час назад
Due to the Castle Mamba X being a touch too big and the redcat receiver becoming unbound from the transmitter, I’ll be installing a Hobbywing Fusion SE along with a Flysky GT5 receiver and that should fix all my issues. If your interested in the rear bumper/tire carrier, I’ll leave a link for it in Amazon. Again I get nothing for anyone using the link or buying products. For information. Thanks...
Redcat Gen9 International Scout - Decals, bumpers and a trail run.
Просмотров 138Месяц назад
Added some decals, bumper on the front, moved the original front bumper to the rear. Haven’t swapped out the motor/esc yet, still stock. I really like this truck. It’s just an all around great RC trail and crawling truck. Thanks so much for watching, i greatly appreciate it. Please hit the like button if you enjoyed the video! #redcat #redcatgen9 #rcrockcrawler #rccrawler #rccrawling #rchobbygr...
Mail call & New Rig unboxing (ish)
Просмотров 143Месяц назад
Picked up the RedCat Gen9 International Scout along with the led light kit for it and out brass portal covers. Pro-Line was also having a sale so picked up a set of the scaler shocks, a set of BFG KM3 M/T tires and wanted to try a set of those Aztec tires, both 1.9 inch in the soft predator compound. Again, Thanks SO much for watching. It is very appreciated!🙏 #redcat #redcatgen9 #gen9 #rccrawl...
Axial Capra 1.9 - Part Deux - Fixed
Просмотров 146Месяц назад
One of the brand new Injora drive shafts ball joint seized up causing that loud chatter near the end of the last video. Got that replaced and running pretty good. Would like the motor and esc to run a little smoother but the other rig with the Holmes Hobby motor and esc acts the same way. Thanks so much again for watching! #axial #capra #axialcapra #rccrawler #rccrawling #rcrockcrawler #rcrockc...
Axial Capra, Upgrades and test run. Problems ensue… 🤦‍♂️
Просмотров 276Месяц назад
Finished getting the high clearance links and drive shafts installed. Time for a test run. Towards the end of the test run it developed a really bad chatter, somewhere in the drive line. Haven’t found it yet but working on it but if anyone has had this issue, please comment below. Thanks so much for watching!! #axial #capra #rccrawler #rccrawling #rockcrawler #rcrockcrawler #rchobbies #rccar #o...
SR Customs comp rig and Axial Capra upgrades.
Просмотров 166Месяц назад
Got some Vanquishe F10 portal axles on the SR Customs Drunken Redneck chassis, but I’m running links for AR45P axles. So I have the F10 link kit on order and that should help. In preparation for @hellorc7678 Trucks with Cups challenge, I wanted to try some desert lizards on the Capra in a 75% droop to lower the ride hight. Also added high clearance lower links from Injora and that stretched the...
Happy Labor Day! Vanquish VS4-10 Phoenix Falken Edition, Quick relaxing trail run.
Просмотров 872 месяца назад
Happy Labor Day everyone! Stay safe and have a great holiday weekend! Haven’t ran the vs4-10 in while so figured I’d give it a little trail run to make sure everything is working. Thanks so much for watching, I really do appreciate it. #rchobbies #rccrawling #rchobbygradecrawlers #rccar #rccrawler #rcrockcrawler #vanquish #vs410 #vs410phoenix #falkenendition
1st RC Crawler Comp with the new build. Many changes are needed 😂
Просмотров 1142 месяца назад
Really worked out some of the major problem areas on the build with it’s first crawler competition. Not that I know anything, but had a lot of good input from other competitors who’ve been doing this longer than I, about spots of improvement and incorrect installation in places. Good learning experience, a lot of fun, know where changes need to be made, just not sure when I can dig back into it...
1st RC paint job done, SR Customs Drunken Redneck comp chassis build is nearly complete!
Просмотров 1052 месяца назад
Quick video on how the paint job turned out. Nothing fancy. Thanks So Much for Watching!! #srcustoms #3brothersrc #holmeshobbies #rockcrawler #rccompcrawler #rccrawling #rcrockcrawling #rcrockcrawler #rchobbygradecrawlers #rchobbies #offroad #rc
SR Customs Drunken Redneck Chassis build, Test Run shake down
Просмотров 1402 месяца назад
SR Customs Drunken Redneck Chassis build, Test Run shake down
GrandO v1.3..4..5..6? Just Run the damng thing & Injora Winch Test 👍
Просмотров 9652 месяца назад
GrandO v1.3..4..5..6? Just Run the damng thing & Injora Winch Test 👍
Grando Plans, Tow Truck Boom, Bodies & 3Brothers RC Anti-Foam Inserts… Oh My
Просмотров 6522 месяца назад
Grando Plans, Tow Truck Boom, Bodies & 3Brothers RC Anti-Foam Inserts… Oh My
@mxacres RC Rock Crawler Competition. Sponsored by SR Customs RC Chassis, Kits & Accessories.
Просмотров 2513 месяца назад
@mxacres RC Rock Crawler Competition. Sponsored by SR Customs RC Chassis, Kits & Accessories.
Laegendary Grando ver 1.2
Просмотров 983 месяца назад
Laegendary Grando ver 1.2
What the He!! Is that!?! The Laegendary GRANDO! Cheap, Ugly, Amazon Prime Day buy.
Просмотров 2893 месяца назад
What the He!! Is that!?! The Laegendary GRANDO! Cheap, Ugly, Amazon Prime Day buy.
CAPRA 2.2 Tire Test! JConcepts Scorpio Vs Pro-Line Hyrax. Both w/ SL3D Squid’n’certs
Просмотров 4653 месяца назад
CAPRA 2.2 Tire Test! JConcepts Scorpio Vs Pro-Line Hyrax. Both w/ SL3D Squid’n’certs
Custom (comp?) Crawler Build! SR Customs carbon chassis, @DLUX_FAB_RC Dravtech shocks & Transmissi
Просмотров 2353 месяца назад
Custom (comp?) Crawler Build! SR Customs carbon chassis, @DLUX_FAB_RC Dravtech shocks & Transmissi
Axial Capra 1.9 4WS - First test run after upgrades!
Просмотров 2434 месяца назад
Axial Capra 1.9 4WS - First test run after upgrades!
Axial Capra 1.9 4WS - Holmes Hobby 2200Kv Revolver V3, Crawlmaster V3 ESC, AGFRC 55KG and more!
Просмотров 2614 месяца назад
Axial Capra 1.9 4WS - Holmes Hobby 2200Kv Revolver V3, Crawlmaster V3 ESC, AGFRC 55KG and more!
Capra 1.9 - Upgrades!!
Просмотров 964 месяца назад
Capra 1.9 - Upgrades!!
Redcat Ascent - Upgraded Servo and New Blue shocks!
Просмотров 2534 месяца назад
Redcat Ascent - Upgraded Servo and New Blue shocks!
What’s Been Going On? I’m up to stuff…
Просмотров 984 месяца назад
What’s Been Going On? I’m up to stuff…
Axial Capra quick run on all brass wheels in Pitbull Rock Beast tires.
Просмотров 1385 месяцев назад
Axial Capra quick run on all brass wheels in Pitbull Rock Beast tires.
NEW RIG! Finally got a CAPRA
Просмотров 2515 месяцев назад
NEW RIG! Finally got a CAPRA
Axial CJ7, some new scale parts and quick lake side trail run
Просмотров 1575 месяцев назад
Axial CJ7, some new scale parts and quick lake side trail run
Nice day for a run on the backyard course.
Просмотров 1406 месяцев назад
Nice day for a run on the backyard course.
JConcepts Megalithic 1.9 w/ Injora Green Inserts and Desert Lizard shocks on the Redcat Ascent
Просмотров 7716 месяцев назад
JConcepts Megalithic 1.9 w/ Injora Green Inserts and Desert Lizard shocks on the Redcat Ascent
Redcat Ascent18 w/ upgrades - Impressive!!
Просмотров 3187 месяцев назад
Redcat Ascent18 w/ upgrades - Impressive!!
@RedcatracingAZ came through! Upgrades overview, review and short run.
Просмотров 1867 месяцев назад
@RedcatracingAZ came through! Upgrades overview, review and short run.

Комментарии

  • @staysmallrc
    @staysmallrc 3 дня назад

    I like the dice! 🎲 🎲

    • @NEO-RC
      @NEO-RC 3 дня назад

      Thanks, I wish they were actually fuzzy but still look the part lol

  • @AdventureTimeRC
    @AdventureTimeRC 4 дня назад

    Good run Philip looking nice on the trail

    • @NEO-RC
      @NEO-RC 4 дня назад

      @@AdventureTimeRC thanks Brent, pretty happy with the Gen9. Good rig

  • @RcDungeon
    @RcDungeon 4 дня назад

    Scouts looking good Neo!!! That's my kinda trail rig!

    • @NEO-RC
      @NEO-RC 4 дня назад

      @@RcDungeon thanks Dungeon! Need to figure out the torture twist but overall, I really like Gen9. That fusion SE was definitely the way to go.

    • @RcDungeon
      @RcDungeon 4 дня назад

      @@NEO-RC DL will eliminate the torque twist

    • @NEO-RC
      @NEO-RC 3 дня назад

      @@RcDungeon I did pickup a transfer case with opposing rotation, just need to figure out how to integrate it lol

  • @SCRedneckRC-Tony
    @SCRedneckRC-Tony 4 дня назад

    The Scout is really shaping up, I traded mine and a TRX4 for the new printer…. Didn’t even get to drive it 🤙

    • @NEO-RC
      @NEO-RC 4 дня назад

      I really want to get a 3D printer, like bad lol can print so many parts. Do you have any CAD experience? I’ve only done 2D but I really wanna learn 3D. You must’ve gotten a good one for trx4 and a gen9. How are you liking it so far?

    • @SCRedneckRC-Tony
      @SCRedneckRC-Tony 4 дня назад

      @@NEO-RC I have some experience, I was a machinist in the Navy. Right now ANYCUBIC is running a sale, the KOBRA 2 NEO (ironically) is an excellent beginner machine 🤙

    • @NEO-RC
      @NEO-RC 4 дня назад

      @SCRedneckRC-Tony good info thank you. I was looking at one of bamboo labs machines but haven’t looked too much.

    • @SCRedneckRC-Tony
      @SCRedneckRC-Tony 4 дня назад

      @@NEO-RC bambu is top of the line, and I can’t discourage purchasing one… but as a beginner myself I have a extremely hard time using and understanding their slicer software. Best example I can give is Bambu is the Horizon Hobbies of printers their software is proprietary and only works with their products… so when you get a stl file it has to be compatible with their slicer or its of no use. Once you slice a file and say you purchased a second printer of a different brand, it’s not going to work on a new printer. So in essence my printer and a few others are open source software and can easily run just about anything🤙

    • @NEO-RC
      @NEO-RC 4 дня назад

      @ that is really good to know! I did not know they used proprietary software and that’s a bummer. I’m definitely not a fan but of anything being proprietary, especially with 3D printing. I get why but it’s much more appealing to a buyer when you can import and use multiple file types rather than relearning a whole new software suite. Thanks for that info

  • @SevenWelt
    @SevenWelt 4 дня назад

    Hello, Great crawl tour! 👍 Greetings from Seven🖖

    • @NEO-RC
      @NEO-RC 4 дня назад

      Greetings Seven 🖖 Thank you so much 👍

  • @MysticRiverRC
    @MysticRiverRC 4 дня назад

    That's a fantastic looking Scout!

    • @NEO-RC
      @NEO-RC 4 дня назад

      Thank you, appreciate that! Thanks so much for watching!

  • @gabeitch-5151
    @gabeitch-5151 4 дня назад

    Sick truck🤟🏻

    • @NEO-RC
      @NEO-RC 4 дня назад

      Thank you sir!

  • @matthiasgundlach8163
    @matthiasgundlach8163 6 дней назад

    Einen schönen guten Morgen wünsche ich Dir, habe eine Frage zu den tollen Figuren, sind die beiden Figuren 15 cm groß?! ,vielen lieben Dank für Deine Rückmeldung, Gruß Matze 😊

    • @NEO-RC
      @NEO-RC 5 дней назад

      Hello and good afternoon to you. The figures are 17.78cm tall or 7 inches. Thanks so much for watching!

    • @matthiasgundlach8163
      @matthiasgundlach8163 5 дней назад

      @@NEO-RC ooooh supi danke für Deine schnelle Rückmeldung, habe ich ja nicht ganz falsch gelegen, Gruß Matze 🙋🏻‍♂️

  • @ch-vs3fw
    @ch-vs3fw 7 дней назад

    Awesome bumper stickers! Where did you get those?

    • @NEO-RC
      @NEO-RC 7 дней назад

      Thanks. Got those on eBay

    • @ch-vs3fw
      @ch-vs3fw 6 дней назад

      @@NEO-RC thank you! Do you recall the name of the seller?

    • @NEO-RC
      @NEO-RC 6 дней назад

      @@ch-vs3fw sure 👍 www.ebay.com/itm/173146696318?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=BTwdI0HMRaO&sssrc=4429486&ssuid=Ia7gyhzYS_S&var=&widget_ver=artemis&media=COPY I don’t see the Reagan stickers anymore If you search eBay for: 1/10 RC stickers You’ll see about everything

    • @NEO-RC
      @NEO-RC 6 дней назад

      @@ch-vs3fw here’s the sticker sheet with Reagan… little harder to find www.ebay.com/itm/156339691703?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=AG84lzK_S46&sssrc=4429486&ssuid=Ia7gyhzYS_S&var=&widget_ver=artemis&media=COPY

    • @ch-vs3fw
      @ch-vs3fw 6 дней назад

      @@NEO-RC thanks, this was a big help! Ordered!

  • @NicholsRCGarage
    @NicholsRCGarage 8 дней назад

    This looks like it was a fun event and some really cool terrain!

    • @NEO-RC
      @NEO-RC 8 дней назад

      It’s a great place in central Ohio

  • @RcDungeon
    @RcDungeon 9 дней назад

    Exactly same issue I've been having and its rough Rc brother 😪. I had issues with my factory Ascent receiver when I bumped up to 7.4 volts. I only use my Gt3b or Gt5 just make sure you water proof the receiver board, the newer ones are definitely not Waterproof. Id recommend the SE1800kv for the Gen8 as well as the Gen9, now the Ascent id much better with the Se1200kv installed. Your Gen9 looks good Neo nice job on it.

    • @NEO-RC
      @NEO-RC 9 дней назад

      I’m sorry you have that back pain too, the nerve pain is the worst! Skyfly makes a waterproof 6 channel receiver for the gt5. It’s the FS-BS6 ipx4. The SE1800 should be perfect for the gen9. Never tried the SE1200 for some reason.🤷‍♂️ Thank you sir, nothing really custom, just a little better than stock.

    • @RcDungeon
      @RcDungeon 9 дней назад

      @@NEO-RC I'll keep that receiver info in mind I always take mine apart and conformal coat the boards no matter what, Ive had to many supposed waterproof units fail over the years unfortunately. Yes the 1800 works great I the 8 and 9 platforms. Something about the gearing in the Ascent I think I don't know the 1200 just really set it almost perfectly for my driving style. Glad to see ya able to get back to doing content Neo

  • @SevenWelt
    @SevenWelt 9 дней назад

    Hello, Interesting nice update, have a nice evening!🍀✨🍀 Greetings Seven🖖

    • @NEO-RC
      @NEO-RC 9 дней назад

      Greetings Seven, thank you sir 🖖🤙

  • @SCRedneckRC-Tony
    @SCRedneckRC-Tony 9 дней назад

    Hate to hear you hurt your back hope it gets better soon, also I think the Hobbywing will definitely be a better choice, you can always use the Holmes in a more capable rock crawler 🤙

    • @NEO-RC
      @NEO-RC 9 дней назад

      Thanks SC! Appreciate that! I can get the mamba to fit I’d just have to make longer motor wires and do more modifications but rather than do all that and like you said, I’ll drop it in a more crawler focused rig. A HW fusion SE will be perfect for this and a much less invasive option.

  • @zjohnson1989stl
    @zjohnson1989stl 12 дней назад

    Was there any modifications you had to do to fit the scx10.3 front bumper?

    • @NEO-RC
      @NEO-RC 12 дней назад

      None, it went right on with no issues.

  • @ch-vs3fw
    @ch-vs3fw 21 день назад

    Wow! That's a massive difference! Thank you for your time and energy on this one!

    • @NEO-RC
      @NEO-RC 20 дней назад

      Very welcome and glad it was helpful. Thanks for watching!!

  • @ch-vs3fw
    @ch-vs3fw 25 дней назад

    This was a lot of work for you! My least favorite thing to do in RC is dealing with beadlocks. Thank you, this was helpful to me

    • @NEO-RC
      @NEO-RC 24 дня назад

      You’re welcome and I’m glad it was of help for you. Some beadlock wheels are horrible and some are pretty easy, it depends on the brand.

  • @timmybikester2309
    @timmybikester2309 25 дней назад

    Great video and awesome rig !!

    • @NEO-RC
      @NEO-RC 24 дня назад

      Thanks so much, really appreciate it!

  • @pandacrawler6x6
    @pandacrawler6x6 26 дней назад

    Great Footage work

    • @NEO-RC
      @NEO-RC 25 дней назад

      Thank you panda!

    • @pandacrawler6x6
      @pandacrawler6x6 25 дней назад

      You're welcome my Friend! Have a Great Day 🐼👌🏻

  • @warehouse1429
    @warehouse1429 28 дней назад

    Just got this one too! Can’t beat $224.50! I got the blue. Got a driver- GI joe classified series ship wreck. So it will be a build theme around that character. I got the light kit and the motor ESC combo that was on sale. I’m curious about those proline wheels you got, hope they still on sale?

    • @NEO-RC
      @NEO-RC 28 дней назад

      Awesome! Yeah it was definitely a good deal. How tall is that GI Joe? I’ll have to look at those. The wheels I have there are Axe Speed from Amazon and some blue beadlock rings also from amazon. I’ll leave a link below but they were $35 then $10 for the rings. What motor and esc did you use? AXSPEED 1.9inches Metal Beadlock... www.amazon.com/dp/B0CG1Q9T1K?ref=ppx_pop_mob_ap_share 1.9in Wheel Outer Rings Rims,... www.amazon.com/dp/B0B8H9GRH8?ref=ppx_pop_mob_ap_share

    • @warehouse1429
      @warehouse1429 27 дней назад

      @@NEO-RC cool thanks! They are 6” tall for the most part. Just a little small so 1/12 scale. But I got em in my Traxxas k10, and two element crawlers. Very detailed faces and I think look great in crawlers

  • @pandacrawler6x6
    @pandacrawler6x6 29 дней назад

    Cool and Awesome

  • @YARCWest
    @YARCWest Месяц назад

    Well done!

    • @NEO-RC
      @NEO-RC Месяц назад

      @@YARCWest thank you sir 🤙

  • @CustomRcGarage
    @CustomRcGarage Месяц назад

    Cool course 👍

    • @NEO-RC
      @NEO-RC 29 дней назад

      Thank you, gonna be need a refresh before too long

  • @leonelmolinajr2
    @leonelmolinajr2 Месяц назад

    What wheels are you using?

    • @NEO-RC
      @NEO-RC Месяц назад

      They are Axe Speed 1.9 from amazon. a.co/d/eB67jc3

  • @rctd3260
    @rctd3260 Месяц назад

    6:33 those are actually the inside door panels. I had to watch a tutorial on where they all went lol. Its a bit of a prosses. Great video tho! I picked one up for 225 as well. super good deal!

    • @NEO-RC
      @NEO-RC Месяц назад

      Thank you! Someone else said they were door panels as well, and SBG has a video I watched after the fact that said the same. Super good deal on this truck for 225. It’s a fun rig, definitely glad I picked it up. Thanks so much for the info and watching! Really appreciate it 🤙

    • @rctd3260
      @rctd3260 Месяц назад

      @@NEO-RC yessir man! The Gen9 is actually my second trail truck. I have a gen7 that I had for 4 years

  • @pandacrawler6x6
    @pandacrawler6x6 Месяц назад

    Performance Top and Good Looking to😮! 🐻‍❄️🥇🐼👌🏻 Nice rc my Friend!

    • @NEO-RC
      @NEO-RC Месяц назад

      Thanks you Panda, much appreciated sir 🤙

    • @pandacrawler6x6
      @pandacrawler6x6 Месяц назад

      You're welcome my Friend ❤

  • @pandacrawler6x6
    @pandacrawler6x6 Месяц назад

    😮Cool New RC and Up-grades! Great Unboxing and Review my Friend,.lots of very usefull info 🐼🥇🐻‍❄️👌🏻 share!

    • @NEO-RC
      @NEO-RC Месяц назад

      🤙 Thanks Panda! Not as good as your videos

    • @pandacrawler6x6
      @pandacrawler6x6 Месяц назад

      😊Thks my Friend. I totally I don't agree 😅 whit you, my Vids are at amatuer level HéHéHé

  • @RcDungeon
    @RcDungeon Месяц назад

    I like your style Neo! Looks sharp and performing very well I'd say for a bigger body crawler.

    • @NEO-RC
      @NEO-RC Месяц назад

      @@RcDungeon thanks dungeon! It’s does really well with just wheels, tires and little brass. I really like this truck, it’s definitely a little bigger than 1/10 but I’m really digging this truck

  • @staysmallrc
    @staysmallrc Месяц назад

    I think the stock electronics are really good. Tires and wheel upgrade, and it's surprisingly capable. If you're a scout fan, you should have this for sure

    • @NEO-RC
      @NEO-RC Месяц назад

      The servo is good but I’m putting the brushless motor in right now. The stock brushed motor is fine, the 1040 is pretty crap lol if I didn’t already have a brushless system ready to go, I’d get hw 1080 and call it good. I wouldn’t say I’m a scout fan but I certainly don’t hate them and this one, I just really like. This is really fun truck.

    • @staysmallrc
      @staysmallrc Месяц назад

      @NEO-RC for sure.. I'm about ready to upgrade the Suburban gen7. Gen8 axles and shocks hw 1080 Holmes 550 and gen9 servo. More than I've done so far! Got 40 and 60wt oil. any suggestions? It's gonna be heavy

    • @NEO-RC
      @NEO-RC Месяц назад

      @@staysmallrc nice! I’ve yet to try a Holmes brushed motor but I’ve never heard anything bad about them. Sounds like it’s gonna be a nice setup. On the shock oil and suspension, it’s subjective, what I like may not be what you like, and I’m certainly no expert. I favor lighter weight oil for quicker response and let the springs handle the weight. Others like heavyweight oil with slower response. You can mix the 40 & 60wt oil to get 50wt if you want something in between

    • @staysmallrc
      @staysmallrc Месяц назад

      @NEO-RC right on, thank you

    • @NEO-RC
      @NEO-RC Месяц назад

      @@staysmallrc probably wasn’t much help but you’re welcome 😉

  • @SCRedneckRC-Tony
    @SCRedneckRC-Tony Месяц назад

    Got it looking good, pretty scale similar to what I had in the 80’s

    • @NEO-RC
      @NEO-RC Месяц назад

      Thanks SC! That’s awesome you had a real one. Bet it was a super capable.

    • @SCRedneckRC-Tony
      @SCRedneckRC-Tony Месяц назад

      @@NEO-RC it was, but it was also ugly as sin 🤣

    • @NEO-RC
      @NEO-RC Месяц назад

      @@SCRedneckRC-Tony 😂

  • @DavisShopworx
    @DavisShopworx Месяц назад

    Awesome man! My wife and I really like the setup you have through the yard, truck looks like it handled it all very well!

    • @NEO-RC
      @NEO-RC Месяц назад

      Thank you so much, really appreciate it! I’m pleasantly surprised how good and how fun this truck is. Thanks you for watching! I really appreciate the support!

  • @SevenWelt
    @SevenWelt Месяц назад

    Hello, Very nice Video, great Crawling adventure!👍 Greetings Seven🖖

    • @NEO-RC
      @NEO-RC Месяц назад

      Greetings Seven and thank you sir 🖖👍

  • @KPtain_RC
    @KPtain_RC Месяц назад

    Nice video, good job! 👍

    • @NEO-RC
      @NEO-RC Месяц назад

      Thank you sir, really appreciate the support.🤙👍

  • @jjm2948
    @jjm2948 Месяц назад

    Carisma has some crawlers with counter rotation drivelines along with boom racing

    • @NEO-RC
      @NEO-RC Месяц назад

      Thank you! I’ll have to check them out. I’ve heard of Boom racing but haven’t heard of Carisma. Appreciate the info and thanks for watching!!

  • @AdventureTimeRC
    @AdventureTimeRC Месяц назад

    Well you didn't wait to upgrade this one lol cool rig bro

    • @NEO-RC
      @NEO-RC Месяц назад

      Thank you Brent. Yeah I just got the lights and two front brass with the truck, then the wheels and tires because proline was having a sale too…lol that’s “probably” all I’m going to do with it. Oh and the motor/esc I had picked up a month or so ago. You know we can’t leave things well enough alone 😂

    • @AdventureTimeRC
      @AdventureTimeRC Месяц назад

      @@NEO-RC lol that's the nature of the hobby

  • @KPtain_RC
    @KPtain_RC Месяц назад

    Wow, that's a awesome crawler course! Nice video, good job! 👍 👍 👍

    • @NEO-RC
      @NEO-RC Месяц назад

      Thank you so much, really appreciate the feedback and thanks so much for watching!!! 🙏🤙

    • @KPtain_RC
      @KPtain_RC Месяц назад

      @@NEO-RC You welcome, like and subscribed 👍

    • @NEO-RC
      @NEO-RC Месяц назад

      @@KPtain_RC awesome! Very much appreciated!

  • @marklarsen-ne2ws
    @marklarsen-ne2ws Месяц назад

    The gmade gs02/f models have the anit torque transmission with opposite rotating drive shafts , the Carisma sca-1e 2.1 trucks also have the anti torque transmissions

    • @NEO-RC
      @NEO-RC Месяц назад

      Thank you and good to know! I don’t have either of those but the gmade seem to be really nice and I’d like to try one eventually.

  • @patrickkerns2022
    @patrickkerns2022 Месяц назад

    the course looks like 1 10 not 18 not so good these trucks are not for 1 10 lay outs but they will perform but not so good

    • @NEO-RC
      @NEO-RC Месяц назад

      You are correct. My course is for 1/10 trucks. I only have the two 1/18 trucks and yes they do struggle on the course. I don’t run the 1/18 trucks often.

    • @patrickkerns2022
      @patrickkerns2022 Месяц назад

      @@NEO-RC but they still do ok .thanks for the reply take care

  • @RcDungeon
    @RcDungeon Месяц назад

    Nice mail haul!!! I love the the redcat scouts gen8 and gen9. Great rigs. Redcat has an awesome sale if I could I'd snap up the Marksman. The Recats are always fat cats lol! The blue inserts should be about perfect 👌, great video Neo! Thanks for the shout out, the Gmade is the only one I know of has the anti torque twist transmission. You can elevate the Gen8 gen9 torque twist running DL shocks in full droop, they are a completely different animal with a good DL shock setup heavy weight oil with softest springs in full droop👌 Also the Redcats do significantly better with a closest to 60/40 weight bias from what I've found

    • @NEO-RC
      @NEO-RC Месяц назад

      Good to know! I love DL shocks anyway lol I’ve been wanting to try a Gmade and a RGT but never seem to for some reason.

    • @RcDungeon
      @RcDungeon Месяц назад

      @@NEO-RC The Gmade are totally underrated by everyone. I don't know much about RGT like to have that cheap CJ Jeep they make though

    • @NEO-RC
      @NEO-RC Месяц назад

      @@RcDungeon every video I see on the Gmade are good, don’t think Ive seen anything negative about them

  • @staysmallrc
    @staysmallrc Месяц назад

    Love my gen9. Decals for the hood are NOT forgiving, so be careful. Tore mine and saw others tear it. Just say'n and shift while creeping, or you'll burn the tiny servo. Just my experience, you know way more about it 😂

    • @NEO-RC
      @NEO-RC Месяц назад

      Thanks for the heads up on the decals! I’ll try and be careful. Normally I don’t shift while moving, but the shift servo is micro so yeah, won’t take much. 95% of the time I’ll just leave it in low. Those aren’t bashers anyway lol

    • @staysmallrc
      @staysmallrc Месяц назад

      @NEO-RC exactly and yah I burned mine fast. The body looks way better tucked in the sliders. Doesn't look so tall

  • @YARCWest
    @YARCWest Месяц назад

    24:05 oh wow what a huge difference in deformation

    • @NEO-RC
      @NEO-RC Месяц назад

      Definitely, a good set of tires is a huge improvement.

  • @YARCWest
    @YARCWest Месяц назад

    17:53 Good thing Nathan Drake had his rubber band on

    • @NEO-RC
      @NEO-RC Месяц назад

      😂 Definitely! I might have to find a RC Ambulance

  • @YARCWest
    @YARCWest Месяц назад

    For the decals I had to look at Scale Builder's Guild video on it since he put almost all of them on. The interior decals require a lot of disassembly so I said screw it and left most of them off.

    • @NEO-RC
      @NEO-RC Месяц назад

      SCredneck helped and let me know those were door panel stickers. Yeah I’m not sure I’m gonna take the whole interior apart to put stickers on but the led kit did come with dash lights but you have to, at least, partially take the interior out to put those in. So maybe I will and do both, the stickers and dash lights.

  • @YARCWest
    @YARCWest Месяц назад

    I love the scout, for $225 it is an absolute steal

    • @NEO-RC
      @NEO-RC Месяц назад

      Yea it was over $100 off but I really debated between the gen9 and the marksman, which is super nice too. 👍

    • @YARCWest
      @YARCWest Месяц назад

      @@NEO-RC That's why I got them both ;)

    • @NEO-RC
      @NEO-RC Месяц назад

      @@YARCWest did you?! Im really tempted to grab the marksman before the sale ends.

    • @YARCWest
      @YARCWest Месяц назад

      @@NEO-RC Yeah I have a vid up on it that you commented on lol I also put up a vid of both of the trucks trailing together. Edit: Ah you meant the Scout, you knew about the Marksman. My bad

  • @Sparroh
    @Sparroh Месяц назад

    What about putting another rider to balance the weight?

    • @NEO-RC
      @NEO-RC Месяц назад

      I will try that but it does the torque lean without the figure in there. Might work though! Thanks and thanks so much for watching!

  • @Sparroh
    @Sparroh Месяц назад

    What does sensor motor mean in the brushless?

    • @NEO-RC
      @NEO-RC Месяц назад

      The motor has sensors that detect rotation positioning and the esc (electronic speed controller) reads the sensor and applies power smoother on start up, better drag brake control, better temperature control and just efficient operation. I think. That’s the first sensored motor I’ve ever had and I haven’t even used it yet. lol I’m still learning too

  • @Sparroh
    @Sparroh Месяц назад

    Driver is great, I’ve been looking at this, thanks for the review. I only have 6 inch figures, hopefully they will work

    • @NEO-RC
      @NEO-RC Месяц назад

      Depends on the truck. This is scaled a little incorrectly. Seats way too deep and head room way too short but you make do. I’ve had to get several figures for one fit properly. Even had cut legs off lol

    • @YARCWest
      @YARCWest Месяц назад

      I'm using the 7inch Inigo Montoya on mine and he fits pretty well, has his feet are on the pedal. Like Neo mentioned though, there isn't a proper amount of head room for him and his head is basically touching the roll cage.

    • @NEO-RC
      @NEO-RC Месяц назад

      @@YARCWest I’d love to find some Metallica figures. Get the whole band in there .

    • @YARCWest
      @YARCWest Месяц назад

      @@NEO-RC That would be sick! My son is named after Cliff Burton. I know he's on amazon but I don't think he articulates well enough to fit.

    • @NEO-RC
      @NEO-RC Месяц назад

      @@YARCWest no kidding! That’s awesome 😎 the first song I ever learned how to play on guitar was nothing else matters. Second song was Thank You by Zeppelin

  • @SevenWelt
    @SevenWelt Месяц назад

    Hello, Very nice Model, have a nice Sunday! 🍀 Greetings Seven🖖

    • @NEO-RC
      @NEO-RC Месяц назад

      Greetings Seven🖖 thank you so much sir. You have a great weekend too 👍

  • @hellorc7678
    @hellorc7678 Месяц назад

    Sounds like a good buy! Nice neo!

    • @NEO-RC
      @NEO-RC Месяц назад

      Thanks! I like it so far, think it’ll be pretty fun rig.

  • @SCRedneckRC-Tony
    @SCRedneckRC-Tony Месяц назад

    I picked the silver one Monday and the Ascent Fusion, proline dual stage foams and Tusks for both 🤙

    • @SCRedneckRC-Tony
      @SCRedneckRC-Tony Месяц назад

      The black stickers are door panels, you have too remove the inner door handle and window crank, then reinstall 🤙

    • @NEO-RC
      @NEO-RC Месяц назад

      Right on! The ascent fusion is probably the best truck of the year or the runner up next to the vanquish H-10. Fantastic choice. I’ve never tried the tusks for some reason but like all JConcepts tires, they have to be good. You’ll be happy with what you got there!👍🤙

    • @NEO-RC
      @NEO-RC Месяц назад

      Oh thank you! That helps. Not sure I’ll mess with that but we’ll see. If I take all the door panel screws out I might as well take the whole interior out and put in the dash lights that came with the led kit. Which I wanted to do anyway

    • @YARCWest
      @YARCWest Месяц назад

      Waiting for your vid on it!