Видео

great detail on removal thanks!

What about under heavy breaking/turning. The tire will deform during cornering?

When you have to start playing around with the factory placement of sensors and are only left with mm gaps between the tyre and the wheel arch, you’ve chosen the wrong wheel/tyre/suspension setup. You shouldn’t have to do all that to get the right stance if you choose the right spec setup.

Ещё бы проставки для вылета колес, и будет красота

In stead of pulling from the brake can you push from the reservoir with a motive and use the computer? I have a Launch and was thinking for doing this. Also it it say do RR, RL, FL, FR and redo RR?

I so appreciate your attention to care for the parts. Like putting down a towel first. I can not believe how some of these guys just toss parts down on a dirty wood bench, or throw them down on a cement floor, or slamming down a deck lid that has glass in it, like a F430 spider which I own. I’m like you. Careful. It’s one of the reasons I just dread leaving my car with anyone. Nice work man.

You have everything except a tripod to film what you're actually doing instead of skipping it.

One of the best detailed vid I came across just awesome stuff thank u

What TCU version is installed in that 360 to allow you to adjust the PIS? That car should have come with the CFC201F.01 which didn't allow adjustments of PIS or degedation index. Some 2000-2001 cars had the F.03 which may or may not be adjustable. The F.05 definitely are and demand a premium as a used part for upgrade for the 360. I have a 2001 european spec which came with the F.01 and my kevlar clutch is a nightmare without the adjustable PIS. Even with the SD2/SD3 at the dealer. Let me know because I am looking to upgrade and if the F.03 has adjustable parameters in the NCR, then I will get one. Thanks in advance for the help.

Beauty

All that work to take out the engine and did not replace the clutch.?

What a complicated install 😂 double sided 3M tape on mine been holding very strong for over a year now

Is this switch in all Gallardos? Looking to buy one my son can ride in...

I have 1995 Diablo wit electric issue maybe you can help me do you have contact number

Nice video.

Thank you for this video, came in very handy for me just now as the traditional method wouldn't get the air out of the ABS Module, I was able to copy this procedure with my ThinkDiag Bluetooth/App dongle

So it seems like the biggest danger of doing this yourself is making sure that shaft gets back in there correctly like at you talk about @ 23:22 ?

Does it hook from a dig?

Where did you get the computer to talk to the car and how much are they

My AC in my Lambo is not working either, did not work when I bought it. They said it just did not work one day when they went to go somewhere so it would be my guess the Freon is low. Problem is, the connections are under the damn car under a triangle shaped panel held in by 4 screws. I got 3 of the screws out and slowly turned the panel, I could touch the connections but could not get the lines on it. But mine is not making that noise that I can tell, mine is no where near that quiet, when it is running it is like a lion roaring.

Is 10w60 suitable in really hot countries? My Aston Martin Vantage requires this oil and I thought a Ferrari would also

Looks really amazing 😍

What shop did you get the Kevlar clutch at? Thank you

Where’s the second video?

How long did it take to do sir?

Do your corner weighting with you the driver in the car and a half tank of gas. If you have coilovers you can balance that out to zero.

Thanks for sharing your experience with the Leonardo. I’m about to do this, but feel the process would be faster and easier bypassing the Leonardo and just using my motive.

Great video and I just went through this myself on my Scud. A couple of things to note: I believe when you thought you were up to temperature, it was the water gauge you were looking at (on left). Your oil gauge was only at the first hash after 120 which is right at about 140. Filling up to max level with your car not fully warmed means your oil will expand beyond max and potentially cause other issues. Also, I noted you mention putting 7 quarts in and then running it to temperature. I followed a similar procedure but put about 8 1/4 quarts in and it didn’t even register on the dipstick. Next time I will probably go ahead and put 9 in.

Great review, very well done👍

Great video the details and time you take to explain are great tip on the oil they recommend a special Denso oil ND-8 its a more stable longer life oil that the lamborghini workshop manual recommends if adding to a unit with oil in it , they way you did it that you removed all the oil do to compresor change is also correct since not mixing just a tip if someone just changing only a hose or filter and need to add , are you in the lambo forum ?

If that tie breaks over time and the box catches on the tire? You are going to have a while mess to deal with. Especially if it catches and the zip tie is still strapped. Plus, it's going to rub when the wheel bounces. 😅

Do u think I can rock the 305s on stock wheel ??? With out rubbing

Do you have to reset the computer?

Do you have an update on how these wheels and tires are treating you? Any rubbing or issues? Haven’t seen anyone else fitting 325s even on the forums.

These look amazing!

Great work! This car doesn't have lifters? Apparently, 458 with lifters can't drop this low.

Beautiful 🖤

Love the wheels!!

Looks beautiful, what did you lower it with?

You need to pump the pistons out with a grease gun filled with engine oil

The corrosion is where the dust seals sit- repair kits are available from hill engineering in uk.

I know the template says drill the inside holes there, but because plastic, could you drill holes more centered and then just put a cap/plug in them? 4/32" = 1/8" = ~3mm Using light colored (painter's) tape is especially helpful on dark colored cars and/ oe dark/black plastic. Plus, the tape can help prevent the paint (if painted) front peeling/ripping. I realize these templates are for dealers, but they really need to be more clear on what all of the markings (lines) represent. Glad you got it on; looks great.

Bronze looks great. So glad you didn't go w/black wheels (or out of place white wheels). Black wheels have no personality; much like plain black dress socks. A gunmetal or dark silver would look great too. With the amount of driving that you do, how long do you expect these tires will last?

Puedes poner el enlace o decirnos donde has comprado la llave dinamométrica ?

My pooch is 13 now and I’ve been coming to terms with the fact dude won’t be around forever. Couldn’t imagine parting ways by surprise. Thanks for sharing and the spoiler looks killer. Great look

Front 19/9.5

19 by 11 rear

Verry good

There was no leek on mine it was from adding fluid mine was like that also cleaned it and never saw one drop of oil dealers don’t take there time or use the correct funnel to top up

Hey nice video had a question friend has a gallardo 06 would this be need to replace his clutch to calibrate? I know this video is old but figured I ask .