Видео

Anything you put in the signal chain is going to add to the delay however you may be able to find a splitter that has less delay than the transmitter, or the monitor, then at least they are receiving the signal at the same time. It could be a good idea :) you'd just have to test it out!

@@AnotherCameraChannel do u think its a good buy today in its particular price bracket? I also looked into pyro h but its not upto the mark and currently mars 4k is available for $520

Pyro H isn't good enough because it's only HDMI? There's also the Pyro S which is SDI and HDMI. So the closest to the Mars 4K at In and Out. From my understanding the Mars System will only have 5" screens, like the Mars M1 Enhanced. There will never be a 7" size. Where the Pyro system has the 7" screen. I also have the Pyro H. I think if I would invest in more I would go with the Pyro as they have the larger screen. I personally really like 7" screens. However, I also really like Accsoon, and they are releasing a 4K system soon I think from their teaser video so I'd at least wait for that one to come out before buying anything. Tech improves so fast so it's always good to check out what's coming out :)

@@AnotherCameraChannel yea because of being only hdmi and S is more addition to the price so it goes upto the next bracket. I am not into M1 and i prefer getting exclusive monitor(s) relatively bigger screen size so i dont think 5 or 7 inches screen size are the deciding factors here. Accson is another good option and cant agree more with the rapid evolution of the tech. It would be interesting to compare different models within specific price brackets

Web Presenter 4K upscales the input to 4K for streaming.

Thank you! I'm pretty sure for this it was just a 600d with a 105cm Selens Lightdome +grid going through a Matthews 4x4 White Artificial Silk (Yellow) and as a backlight there's a 60X up on the ceiling!

I believe the 85% brighter stat is in use with the F10

​​@@AnotherCameraChannelthe funny thing is, on sidus link app on the illumination handbook section there's a bare bulb lux reading at 1m and 5600k, 600c pro II gives 21610 lux vs 22150 lux from 600d, there's no reading for reflector on 600c ii pro so I don't know what is going on with that information

You're welcome!

Depending on how strong the stabilization needs to be, the more it’ll crop, and yeah you could lose some quality but if you’re using a 6K and exporting at 4K you probably won’t notice at all! The only other thing may be motion blur bumps from shutter speed!

I used exFAT so it can be used on both PC & Mac. You never know who might need to plug in your drive! :) I believe HFS+ is Mac compatible only.

Did you watch the review from Middle Things? ruclips.net/video/vdrzfuV61pU/видео.htmlsi=mgezUpIpEG4-XS1O they make their own controllers and devices for this kind of thing, not sure if they have done for this exact camera though. Worth maybe looking and checking out their website :)

The 600D Pro is the first 600D? 🤔

@@AnotherCameraChannel No it’s not. There’s a 600D (non-pro).

Pro was first, then they released the 600 non-pro. They are the same chip, same outputs etc. Just the Pro has Weather Sealing and more pro Wireless like Lumen Radio and it’s ballast is heavier because of it. From their website: “When we released the LS 600d Pro, we also made a promise to create a tool that was more accessible and would revolutionize the amount of output most creatives had access to. The Light Storm 600d is a perfect light for any demanding lighting situation you may encounter as a cinematographer or photographer.” I have both, they’re the same so no need to add it to this comparison.

how effective is the LS 600c Pro II compared to the LS 600x and 600d? I was planning to buy 1 LS 600d and 2 LS 600x for filmmaking purposes. Can I change them with the LS 600c Pro II, and will it get the job done? Thanks

Definitely love the side-by-side comparison. Very professional even if does take a while to setup and really get the data correct.

Yes, you connect an ethernet cable in the back and you stream from the Web Presenter 4K.

@@AnotherCameraChannel Thank you very much for the information!! and thanks for answering my question!! Greetings from Argentina!!

Did you know they have the new PYRO system now? It supports more devices than the MARS system does. 4 devices instead of 2.

I just watched a review from Think Media and it compared the GVM Pro 650 B to the 600X. It only beat out the 600X on CRI in one of the three tests (2700K, 4000K, 6500K) so while I can agree that $1000 cheaper is obviously a better price. I can't really agree on colour accuracy unless you have some data showing the GVM Pro 650 B vs 600C Pro II? And not just an average CRI number given by the manufacturer but actual testing at different CCTs. Since the 600C Pro II can do green and magenta shift because of the RGB chips, and Aputure also have Tim Kang who is a colour wizard I'm thinking that Aputure wins this round, other than price of course.

that's a real good idea! maybe I can try borrow it again and do this

@@AnotherCameraChannel nice one. Yeah, I find that a really good way to test and compare actual output (removing all beam angle variables), and also the way that I’m most likely to use them

Here you go Robojim! ruclips.net/video/iUaubsrtUWs/видео.html Thanks for your suggestion

Thank you for commenting Mr Judd, always a fan of your work :)

87 % with the included reflector....

😍

I haven't done it even once since getting it, maybe I should! haha! We picked up a second one a few weeks ago, and I think in comparison the wheels are a bit more firm so it's probably time I topped up the air inside the older one! Thanks for the reminder 😂

Glad it was helpful!

SDI is only HD :( So HDMI only for 4K!

Just like the new PYRO system

I don’t know because I don’t have the rode one, but it’s a possibility, since they are very similar

My pleasure 🫡

My pleasure!

Web Presenter 4K upscales it at the end.

@@AnotherCameraChannel it is still full hd signal. upscale, but still full hd. It is not full 4k resolution. To have full 4k you have to have camera with 4k output, mixer handel to receive 4k signal and 4k encoder.

Yeah I know that... ..but RUclips receives a 4K stream so, it's still a 4K streaming flight case. Never said the full signal was 4K. Stop getting upset over the title not meaning what you want it to mean.

@@AnotherCameraChannel Just because a chicken has wings doesn't mean it can fly like an eagle. You have one device in your case that can produce a 4K signal. This doesn't mean you're actually streaming in 4k. You output a 4k signal, but you don't achieve that quality. And yes, I have a problem against the title because it misleads the viewer.

I like the Sandisk 4TBs, there were some dodgy ones maybe a year or two ago but I think they’re all good now. I have four of them!

It happen the same problem in Saramonic proudct. now Hollyland intercom best

Undo all the velcro, and try pulling out and also bend the pole a little so it'll come out of the hole easier

Thanks so much, I haven't shimmed them, so I'm going to try this week

I like the 45mm for its width. But I feel the 65mm just has a special feeling, ya know? Looking forward to seeing the new 33mm when it comes out. I also hope there’s a 135 or something later too

Yeah, that's an aspect about these lenses I'm not in love with.... good luck!

I've had the 45mm on pre-order for 3 weeks now at B&H - no word on when they're actually going to be available. Must be a lot of demand for them.

B&H is getting them in 5/09/24 and will start shipping it out then I believe.

Glad I could help!

It's ridiculous 😂 but I'm glad they are so affordable! Later you can connect so many, I'll have to order some more!

It'll change your life, no more chasing people down. just speak directly to them. Would have been great for that Crypto livestream event we did last year!

Truly an incredible price for such a great piece of kit!