Видео

The fact that you haven’t figured out what half links are is driving me nuts😂

Dude honestly ❤there’s no way you actually tried to make a video how much do you tighten the spark plug? What’s the purpose of the drill hole it’s like you literally said” I’ll get you once I drill that hole” and that’s that can’t watch any more umm duuu ummm what that thing called when I can start talking like a man and not a little girl I’ll make a real ytv

How much did all the parts cost to build motor?

My bicycle will do 29 without a motor with just the peddles!! 50mph should be the minimum speed I wanna go with a motor.Thats the whole ides of building a motorized Bike to go a Hell of a lot faster! You forgot to talk about air screw, fuel mixture. Pilot jets Needle adjustment. etc,,,👍

That is the crankshaft not the cam 🤔 You never changed the cam.......

Do you remember what size carb you used?

Where can I find those motor mounts ,

Good info thanks 🤌

Is that an ld100? If so why does the head look so small my gt5 ld100 looks way bigger.

How much stp do you add each change

How long is the chin

is it safe for the engine tho?

Yo bro after like 2 months and $800 later I finally got it up and running bro. I put rubber in between the engine to relief the vibrations it gives off 😂. Ima make upgrades soon as well, I made a spark plug upgrade first though, I got a B7hs spark plug I think it was called. But anyways can you list some upgrades I can make?

Nothing has a chance at life running penzoil jiffy lube uses that thing probably holds less than a quart amsoil is $15 online

Do you have a link to the engine you bought?

You making custom fairings for it aswell or just keeping the tube chassis?

I've almost the same. Build just a bit smaller frame n a 420cc 40 series torque converter

where did u buy that kit

Should have done a before and after top speed

I’m getting no spark my dad and I have been trying to fix it for hours

I don't see how that rebound goes on that motor.. I just don't see how

The Reed valve looks a lot wider than the round hole on the exhaust of the motor anyways

How the hell does a square peg on the Reed valve go into a round hole on the motor.. how does that work and seal

Is this a 29 inch bike?

How much faster to take off the gears did you go

Funny ass dude 😂

what bike is that?

Hey I have a 100cc motorized bicycle and when I turn it on it doesn’t stay on I have to keep pedaling or it turns off and when I accelerate it doesn’t move it just revs can you help me out

Where did you buy that exaust tip add on?

Some one can help

I need too put chaine and my

please make a hydraulic clutch installation and tear down also how to properly refill correctly , I have a yd100 with hydraulic clutch and the hose guard must've moved one day and it melted on my exhaust, it broke so I bought a new line hooked it up I bled it and filled it with magura blood clutch mineral oil and still no engagement and its like my back tire is like stuck now idk wtf to do been so pissed at this ??

What would cause it not to turn on

Chains loose also

Naw bro. You left out the parts that I’m having Trouble with. How did you get your case to go back on because I seen you having problems with it and how did your boat get so long that you can put the nut back on it

I did away with the manual pedal chain altogether. Installed a pull start and away she goes!

I would love to try one of these cross country...I'm building one now to do a cross country run..Ithaca NY to San Diego California...I have rode this on a bicycle four times back and forth ..building a two cycle to try now...there cheap

Hey bud I appreciate your videos and trying to help people out and all but listen you got what you call a little gear for that you screw on your pedal😊 the pool alarm off your bicycle engine gets come with a poor for your pedals and for the gears on your engine you got four motorized bike you're telling me you don't know how to work on you should not be allowed to have one then I'm sorry with all due respect

How do you turn the engine over

Hey man finally somewhat got it up and running. I bought the wrong size sprocket adapter so yeah fuck me. I had to improvise with it. I bought some rubber sheets and cut it out and filled the spacing with it. Also I did the wheel spin test to see if it was straight and it was straight with that a very very tiny VERY TINY wobble on the sprocket. So I’m going to either try to adjust it some more or buy the right size adaptor. Also I have a question when installing the sprocket adaptor does the adaptor hole thing (the holes where the black screws go into the sprocket to connect) have to be more in the back? Or more in between the spokes? Idk how to properly say it. The two metal pieces that I screw onto the hub of the bike. Do those go further back on the hub? Or further up by the spokes? Or in between the spokes?

Just got 4 tickets riding one of these things. Unlicensed, unregistered, un-inspected, and uninsured. Court date is damn near a month away so I’ll try to come back w an update

My engine is also a imaycc 100cc. Runs great haven't really had any issues

Was fun to watch. You did a good job! I need to do this as well someday great video

Nice bike

I have the same bike with the same motor

It probably doesn’t matter now - But- it is pretty necessary for a 2 stroke engine to hav an air filter on it 2 havin’ it run rite. . . Good Show - I’ll b using some of your method for my build. Thanks.

Man I’m fighting constant overheating issues after hopping up my 224. These things just don’t seem to like the high compression and advanced timing. I got about 5-10 min run time wide open. And I keep blowing head gaskets.

I like popcorn

Hi I was wondering witch type of oil I should use on my bike

hey, im a little late but im wondering how big the frame is/ what bike is it? cause it didnt fit on mine so could you please tell me the exact bike and model you have