![Angrybeard](/img/default-banner.jpg)
- Видео 89
- Просмотров 256 357
Angrybeard
США
Добавлен 15 ноя 2011
Emptyatlas@gmail.com
Airstream Frame seperation? Or Maybe not !
There is a seperation between the camper shell and the rub strip holder. This is a classic firt sighn that you have frame seperation issues. Is that what I have too???????
Просмотров: 104
Видео
New! Duromax 13000 Backfires and ruins itself. Fixed!!!!!
Просмотров 1,6 тыс.4 месяца назад
This is a brand new out of the box duromax generator that isnt right. It started backfiring right out of the box. This ruins the stepper motor for the choke. WHich makes the choke quit working. It all just gets worse from there. This is it and the fix.
Forchens 12volt portable oven. Tested,,,Link in description
Просмотров 2254 месяца назад
Testing the 12 volt portable oven from forchens. Link to oven: amzn.to/3UlV5dV
Duromax 13000, Bad electric choke stepper motor!
Просмотров 534 месяца назад
Showing the inside of the electric stepper motor and what has failed.
Okai Neon Pro Battery Install [ how to ]
Просмотров 5294 месяца назад
link to battery removal ruclips.net/video/Z4q3j23jFQ8/видео.htmlsi=dT2982ZcIz12kH4d Link to batterry replacement drama. ruclips.net/video/GyYQ0NOArcU/видео.htmlsi=Uh3DPZEJrLRU_S8x
Okai Neon Pro batterry removal
Просмотров 1,3 тыс.4 месяца назад
The batterry on this scooter has failed at around 6 months and 91 KM. This Part of the journey of getting a batterry as well as how to remove it. Link to Video discussion on the obtaining a new batterry from Okai and that journey. ruclips.net/video/GyYQ0NOArcU/видео.htmlsi=PR8CQ5w1rpIFnPeJ Link to Battery installation video ruclips.net/video/5lDwMFugkiM/видео.htmlsi=KjD2c3y7vgOV7dpd
Okai Neon pro is not Okay.
Просмотров 1444 месяца назад
I talk about my troubles with the Okai neon pro. It is troubling.
Build an electrolysis tank. Cast Iron cookware.
Просмотров 815 месяцев назад
Casual discussion on electrolysis tank for cleaning cast iron cookware. Here is the link for the power supply I use in the video. DC Power Supply, Bench Power Supply with Encoder Knob, Adjustable Regulated Power Supply with 5V 3.6A USB & Type-C Quick-Charge, Variable Power Supply with Overcurrent Protection (0-30V 0-10A) a.co/d/dlNYKKL
Building a 12 Volt power system for overland fridge etc...
Просмотров 1295 месяцев назад
I build a 12 volt powerbox that recharges off the vehicle inverter. Charging happens automatically with the noco genius charger. The powerbox run the fridge while the vehicle is parked for many hours. The option gor more hours is just a matter of batterry choice. In my case I went with a 22 ampbhour battery.
Wesonorus 52QT overland, camping, freezer/fridge. unboxing and first impressions.
Просмотров 1216 месяцев назад
I unbox and struggle to understand how this thing is working. My initial impressions, and some specifics. wesonorus 52qt freezer fridge 12volt or 110ac
Champion 5500 inverter generator. Unboxing, compare to predator 5000, and why buy inverter
Просмотров 3,2 тыс.7 месяцев назад
Unboxing and set up of the champion 5500 dual fuel electric start inverter generator. I didscuss why buy this one over the predator 5000. I also discuss why we have inverter generators and when and why you might want to buy one. I also explain why whole home generators are not inverters and why they dont need to be.
OKAI NEON PRO....We have a problem!!!!
Просмотров 1,8 тыс.8 месяцев назад
This video highlights a newly developed issue with a new electric scooter. 56 miles, a few months old and appears to have a failing battery. Help from OKAI's tech support is pretty much non existance.
Rocky Mountain Vertex Jr 24". Unboxing and assembly overview.Awesome bike!
Просмотров 1398 месяцев назад
Rocky Mountain Vertex Jr 24". Unboxing and assembly overview.Awesome bike!
The Cheap chinese FAT Tire bike chit show. Build and insight.
Просмотров 1999 месяцев назад
The Cheap chinese FAT Tire bike chit show. Build and insight.
Witamats, lexus GX470. Are they any good?
Просмотров 2,3 тыс.10 месяцев назад
Witamats, lexus GX470. Are they any good?
lexus GX470, FN wheels and tire set up. Eibach lift. Rub or not!?
Просмотров 33211 месяцев назад
lexus GX470, FN wheels and tire set up. Eibach lift. Rub or not!?
Aliexpress dash cover for Lexus GX470
Просмотров 48011 месяцев назад
Aliexpress dash cover for Lexus GX470
lexus GX 470, Eibach stage 1 lift install.
Просмотров 82311 месяцев назад
lexus GX 470, Eibach stage 1 lift install.
okai neon pro, loose headset bearing. Fix!
Просмотров 1,2 тыс.11 месяцев назад
okai neon pro, loose headset bearing. Fix!
Okai neon pro, rear wheel removal
Просмотров 4,3 тыс.11 месяцев назад
Okai neon pro, rear wheel removal
lexus GX470 headlight assembly removal
Просмотров 75111 месяцев назад
lexus GX470 headlight assembly removal
Giant mouse Reo or Acta Non Verba? Which one to buy?
Просмотров 366Год назад
Giant mouse Reo or Acta Non Verba? Which one to buy?
Acta non verba A100 magnacut, Sog and Benchmade.
Просмотров 71Год назад
Acta non verba A100 magnacut, Sog and Benchmade.
Ram 3500, rear end clunk. The reason why!
Просмотров 7 тыс.Год назад
Ram 3500, rear end clunk. The reason why!
Flagstaff E-pro 20FBS camper. Discussion
Просмотров 965Год назад
Flagstaff E-pro 20FBS camper. Discussion
okai neon pro scooter brake adjustment and discussion
Просмотров 2,3 тыс.Год назад
okai neon pro scooter brake adjustment and discussion
Camper slideout floor support when traveling
Просмотров 76Год назад
Camper slideout floor support when traveling
BIG AGNES spicer peak 6 & Thermarest mondo king
Просмотров 653Год назад
BIG AGNES spicer peak 6 & Thermarest mondo king
My scooter just shuts off after 30 seconds even at full charge
Having the same issue have replaced the spark plug just waiting on a back ordered carburetor. Thanks to reassuring me with this video I feel confident with the new spark plug and carb my problem will be solved 🎉
Thanks for the video!! Did you ever try the 12v plug instead of the inverter? Could it achieve 0? :) Just got one myself, wondering how it's done over time?
@@snowbeardCO Great question. If you search around on my channel you should find a video of me making a 12 volt batterry box to run this thing. 12volts is the way I run it and it runs great. Just used it a few days ago and I use it quite a bit. Probably once every 10 days. I can't remember if I've seen it hit zero or not. I know my memory recalls an 11 and maybe even a 9. Just can't remember. I am disappointed however in the way the fridge compartment works. It doesn't have any temp control really. It just ends up being whatever it manages to get down to while the freezer is working. It's a little lame. But it does work
My Okai scooter is broken too. It wont power on, the weird thing is that it turns on whenever it wants 🤦🏻♂️, i have tried to turn it on for the last 3 weeks and not working. I went to my garage at 2 am, and its ON. Wtf, OKAI freakinnn sucks! Customer service is not helping me.
@@eddiefogerty The fact that you can't order any of the components off of their website is a dissapointment. Because it makes it so you have to call their customer service. Which is it's own dissapointment. Everything on the scooter with the exception of the batterries management system funnels through that speed controller. That or the on off button itself are the 2 most likely options for this problem. But you can't get those parts without going through customer service. I'm surprised we havnt arrived at the point yet where you could just buy parts and build your own scooter. Like radio controlled cars and airplanes from the hobby shop. Mountainbikes etc. .. Heck, you can buy the components to turn a bicycle into an electric bike. There's a market for this is scooter land it seems.
Thank you for honesty review. I oredered a set for Yukon. 😊
@@Yukon4life you bet. I still have them in the GX470 and they are great. No complaints
I never saw him put oil in it.
@@richardhenderson8667 lol
I have the exact same problem and symptoms as you described on this and previous video. I’m trying to get them to fix it for me because I don’t have the tools and the handy hands as you do. Apart from replacing the battery, do you think if there is any other ways to resolve this? Mine was shutting down and I was able to turn it on the next day and then it shuts down again. Repeat the same thing the next day 😢
@@ttrieu21 no. I don't beleive there is. The batterry management system is built into the batterry. It's a very sophisticated circuit system. It's likely unhappy with some information it's reading from the batteries and is shutting the unit it down for safety. In other words. To prevent a fire. It is possible that there is something else going on. Impossible for one to really know without seeing it in person. Your best resolution will have to come through OKAI. Good luck
@@angrybeard4673 Thank you, seems like an intermitten issue, today I got it charged to 100%, I will take it for a ride a see how it goes. have a nice one!
Where u get the wheel from?
@@christopherdiaz9546 I assume you will only be able to get it from Okai. I didnt change mine. I just removed it and put it back on. I've never had to buy one.
Great video! One word of caution though: Watch out boy! That oscillating tool will cut you real good!!HeHeHe
@@GregMcDowellq No doubt!
What about any locktite on the screws?
Have you use it in colder days?
@@nunodeazevedo I have not used this tent in colder days because I have a Kodiak canvas tent with a wood stove.
Ok thanks, but do you think she can retain heat? I'm talking about cold days like 10°C/50°F. I have other 3 season tents but they tend to have to much air flow and on windy days I can feel a breeze inside. Where I'm from the worst we get are nights that go down to 8°C/46°F. I really liked this one and was thinking that she's good enough to maintain a good warm air inside without creating too much condensation.
The spicer peak tent would not be a tent to consider for the cold. For one, it's a big tent. All the open air space will be working against any warmth inside. Secondly, it's baisically a screen ceiling that is covered over with a rainfly. The material is the typical thin nylon tent material. There is nothing about this tent that suggests it should be considered for any cold temperatures. Quite the opposite in fact. Kodiak canvas makes several canvas tents that would be worth looking at for that. Unless your hiking with it.
Thank u @@angrybeard4673
@@nunodeazevedo well. To be honest. I think you could sleep on the ground with a good sleeping bag at 50 degrees. So. Yes, you could use this tent in 50 degrees.
Have you use it during colder days?
@@nunodeazevedo I have and it is not cold
Did it take the full bottle of oil??
@@mikesterloc can't remember. I have another generator video up to. Different generator. I think I recall one of the generators coming with good oil. Usually I never use the oil supplied. I just use my own. In the case of the generators I usually read what the book says the quantity is and then I measure that amount of good oil and dump it in. I dont know what I did on this generator
I was being lazy when I asked but I did read through the manual and added 600ml of oil. So far so good. Thanks for the quick reply
Cool video, I will keep this in mind for when my airstream starts coming apart.
@@737mechanic fo sho
where would i be able to purchase a replacement battery for my okai neon? i’ve looked online and nothing seems right? any help would be appreciated thank you!
@@jaydendelgado1482 you will have to contact okai and have them sell you one. They are around 500 bucks. Sooo. Just saying. Might just consider getting a new scooter unless yours is still under warranty.
When some random dude on RUclips does a better job of showing people how to do this than Okai. Okai should just pay him to make videos for them.
@@ZenCloud9 🤣 Well, for the record. They dont!!! That was great.
Have you had any charging problems with their proprietary charger? I contacted okai and they no longer sell the charger. Currently have a $900 weight.
If you want to see how REALLY fast ANY saw cuts; get a full chisel chain for it. You will be amazed! I've converted most; (seven of the the ten); of my saws to full chisel. These full chisel chains are somewhat 'delicate'; they won't stand the abuse that a semi-chisel chain will. Hit the ground once; and you are done! The chain will need sharpening. The semi-chisel chain that comes on most saws cut reasonably well and are very rugged. They are very forgiving of a lot of mistakes. But if you have clean wood and are careful to keep from hitting the ground; a full chisel; oh man!
That's NOT cutting WITH the grain. It's cutting ACROSS the grain.
I’ve been having the thing start accelerating on its own through traffic. It was dangerous. I couldn’t stop it. I had to power it off to get it to stop. Couldn’t brake it or anything
butt ugly tent, but good quality
@@OPSteel97 yea, it is pretty ugly!
Question,i have the same play on my 97 tj with a dana 35,,i noticed you did the right rear bearing is the a left side as well that also needs to be done at the same time? thank you!
@@markboza6215 The left side is done the same way as the right side. Just because one side is bad doesn't necessarily mean the other side needs to be changed. It's a judgment call. I would change them both. It's not a hard job and they are not expensive.
@@angrybeard4673 I agree i have all the needed seals and koyo bearings hopefully my axle shafts are not run down, thanks for the help!
Excellent. I think you had the most precise non waste of my time how to video I have ever watched! You got right to it and got it done. Thank you!!
Awesome. Glad to hear. All my friends say I talk to much. Lol
This worked like a charm! Thanks for the help!!!
Awesome. Glad to hear it!
Thanks for the video...I just purchased that exact model. Can't wait to get it unboxed, and give it a try. I plan on making a well ventilated shed, to protect it from the elements when in use.
you seem to know your way around this scooter, I bought the same one but in Switzerland it is limited to 12 mph... Do you have a solution to remove the speed limiter ??
I don't know this for a fact, I've never tested my theory. But my theory is that the small blue wire that is attached to the middle of the circuit board on the speed controller is the speed sense wire. Not the big blue wire under there but the small blue wire. Clip it and see, if it was wrong, just put it back together. Roll back the grip tape from the front, remove the speed control unit, clip the small blue wire. If I'm correct, it will no longer know how fast it's going. You'll most likely lose your speedometer and possibly the front regenerative braking. Over here in the USA they are limited to 20mph, 12 is a selectable option. We just cycle through the speed options by double tapping the power button. Though I have never actually tested my theory. I can tell that it is capable of over 20mph because I feel the computer holding it back. So, don't be surprised if it goes stupid fast when unlimited
We need a video on how take off the front wheel 🛞
K
They turn into REAL chainsaws when you put a REAL battery in them. Like a 7.5ah. I run an 8ah and a 12ah in my 24" CSX5000.
Nice video, me and my fiancé were just saying that they should make the batteries interchangeable.. this is a great sub however we will most definitely not be doing this
Thank you Sir, I just confirmed that the backfiring killed the stepper motor on mine as you showed in the video. I don't really have faith in this generator anymore as it seems it's reliability depends on some tiny, plastic teeth... Will be returning to Home Depot for another brand at this point, very disappointing.
I hear ya. I get it.
Thank you for the video. I just bought one and I am expecting it to arrive in the mail soon. What do you recommend I do? Return it, purchase another brand and stay away from this company? Get an extended warranty?
Yea. Thats a good question. And I'm not sure really. I had a problem and what shouldve been an easy resolution was a shit show. I think that the best path forward would be to buy it from Best buy and pay for the extended warranty. Then if you have problems you vould just return it to best buy and avoid dealing with the manufacturer. There was no way I was just going to be ok throwing away 900 bucks. So my own arguably immoral option was going to be. To buy another one from best buy and then put this junk in the box and return it for a full refund a week later. Sooo. Goodluck. I have repaired mine and it has been fine so far. Regardless, I had to go through to much for me to be ok with it.
Very helpful, thanks for posting this!
glad you put something on the threads. I give a crap.
Will this unit switch over to gas automatically if the propane runs out?
No it will not
Thanks for the warning. I just bought one. I'll have to take it easy on it until I can afford to buy something to replace it
Chinese garbage. You will always have to repair it when it is new. The Chinese NEVER inspect or test products before they go to market. (Does not matter if it was engineered in the U.S ) Cheap Please do not get me started on the cheap knock off Chinese sparkplugs. (It/they are just evil. They know what they are doing) How many hours have been lost to repairing Chinese garbage and trying to work with Chinese parts? If you ask me it is a attack on the U.S. and the West. I blame DC, just as much as the Chinese, for selling us out and ripping us off. Anyone remember Made in U.S.A. parts and goods? DC or China or both have to go. Why the hell should anyone pay taxes? Pay DC to sell us out?
LG Chinese junk spark plug
We're glad the spark plug our Tech Department suggested fixed the issue. Starting at the end of 2023 all DuroMax generators are now assembled with NGK 7131 BPR6ES Nickel Spark Plugs.
I just purchased one from Home Depot, it's backfiring like crazy on propane and the spark plug is Torch F6TC....
having the choke electronic is dumb anyways, make it like plenty of small engines have been where its attached to the governor and throttle assembly
Totally agree. I'm working on converting one of these replacement carburetors over to a manual set up. Trying to figure it out now. I'll make it into a video once I get it done.
WOW! That is fucking loud! Why do people buy these? Your neighbors must hate you? My neighbor has a Champion & it's soo loud it drowns out the sound of mine with me standing next to mine.
Weird how the automatic choke solution used to be a flap in the fan's air flow that would overcome a spring holding the choke closed. Or a bimetallic strip that was calibrated for the temperature. Know how many of those I've seen fail? Zero.
I’ve been on the fence with a 2022 GEO PRO Bunk house. The guy wants 21K. He’s dumped about 3k in upgrades but I’m having a hard time committing due to the huge variance of prices they sell for on the used market. 20’ is pretty small as well.
Good 😂
Thanka for a video, without it i could waste whole saturday to take battery off
Coincidence.
“Fucking Hell”…..then sends it 😅
GET RID OF THE PLATE, IT'S ALUMINUM, which causes NEUROLOGICAL DAMAGE.
on my 2000 dakota it is in the abs module under pinion factor.
Plastic gears never seem like a good idea to me, yet they are everywhere. Good job finding the problem!!
I own a Neon and I am replacing the battery. Thank you for saving me time and frustration. I have en joyed my scooter and have ridden it almost 200 miles I am year and a half. Yesterday after riding it twice it failed to start and run. I did find that if I pushed it and pressed the power button it would give me error codes 2 and 13.
That's great to hear. I'm glad the video was useful to someone. Goodluck with your issue. It is the battery, you are in the right path.