Видео

I wanna see foccacia cooked in a 3d printer that would be fun

Asking the real questions here! :D

So you need a laser cutter, 3d printer, 3d resin printer, to upgrade your P1P?

When steak. LOL

You have just earned youself a new Subscriber... :) ... with an Mk4, some eggs, rice and a high electricity bill :D Worth it! (und Backpapier ;)

when is the baking vid coming out

missed opportunity of 3d printing a fork

Fantastic video.

I think you took the lay in layer lines a little too literally!! 😀🐣

I love this video! Very funny and underrated! It was very interesting to see how the food was cooked, and whisking it with the nozzle was smart. I also found it very funny how you changed the site.

Can you paint after acetone smoothing?

The plastic bin is important. Do not use a bathtub

here in Brazil the cheapest filament is around 18$ (the Elegoo),(obs: the creality one is 25$ +10$ of shiping)

Where do i find that test print?

Well, i have a lot of PP because i drank 2 gallons of water.

Brand new out the box - both homing switches don’t work

I expected that all wires will be white... for the sake of insanity

i bought a filament for like 7 dollars it was good I have some videos of the prints they are good a

Looks very cool

I just got elegoo pla+ having trouble with it warping and leaving thick springs hanging I'm areas

What's stopping you from just using q dremel?

I use elegoo exclusively for PLA as its a great price and it prints really well also easy to get it off Amazon next day 👍

I've bought something similar, though from what mine showed we need to print it using ABS due to heat resistance properties. thus far using PLA is there any issues?

Shhh your gonna drive the price up

I would like to make a cosplay. But i fear some parts will scrape to each other, and at the "contact" paint will be removed. Any idea how to make more durable? More clear coats. Like matt varnish? Also do you have experience with spray putty? Will it scrape off easily? I need smooth surface. Thanks for any help!

Awesome video mate, love how it turned out! My workspace looks the exact same when I'm working on something haha. Cheers

This is so helpful

Why did you put a comma in the price? You should have used a decimal point. Not a comma. Commas separate thousand, millions, billions, etc. Like this 100,000. That is read as One Hundred Thousand. Hope that helps! :)

recently i tried different filament other then the bambu . I was suprised how well sunlu , giantarm, and polymaker pla print. I was especially impressed with the Giantarm silk pla . very shiny and smooth prints. I tried the blue gold and silver. The silver did not print as nice as the gold but very close

I'm still learning about slicers and have only just got my first printer, now I know my way around my printer and fixed a fault from factory I'm able print from start to finish now and I'm just about to get through my first reel of the anycubic standard pla , I have got through approx half a reel of the sunlu matte white pla and they both gave me good results. My printer is the anycubic Kobra 2 neo and apart from a tensioner nut that serves one of the guide wheels for z axis being put the wrong way around my Kobra is performing well, I'm impressed with it so far I was going to send it back until I diagnosed the fault

I bought Elegoo Rapid PLA for my Creality K1C -- It works better than the creality filament. Usually I don't need to gluestick, and the prints adhere nicely to the bed, and it pops off the bed with no residue. Residue should have been part of the test as cleanup is essential too.

This "OK" review could have been GREAT, IF ONLY you used a honeycomb mat that would ACCURATELY show the good cutting performance of this unit. IF I were to take the time to review a laser unit, you can be damn certain that I would want to publish a video that I could be proud of and that would show the best results it was capable of... So there....

Thanks for this, i'll try the acetone route since i have some. I've read many bad reviews about PVB filament so i'm not eager to try it.

Very helpfull, thank you I am new at working with 3D printing so this was a big help.

Does the acetone method work with PLA?

cool build but that print quality as absolute dogwater wtf... this thing prints worse than the cheapest ender 3 clone in existence

How about sand blasting the PLA?

Where did you get that particular torture test piece from? I've seen variants, but not one with spikes.

you can mix uv resin and baby powder too uncle jesse shows this and i do like it

Is that filament tester available for download somewhere?

Geeetech is really cheap stuff I don’t know how you managed to pay that much for it. It’s good for the price but it’s not great.

What is this ABS, PLA, or PETG type of filament the fish one

so whats the tldr?

I always assumed this was more due to the 3d printer and settings used. I don't own a 3d printer.

If i look around atm Geeetech is the cheapest filament you can buy. ABS, Petg and pla are all around 10-12$.

the build plate. never knew of such glue. but looking at the price $35. I'm glad i bought the gold build plate $20 and the prints adhere well and come off with ease.

Do you put the motherboard fan ??

a) the beeping can be turned off under Settings b) print one of the available brackets and move the CR Touch sensor to a zero-Y offset. This is a MASSIVE game changer in terms of first layer quality. c) use a PEI bed. If using a PC bed, remove it before spraying glue.

Does the acetone approach work with PLA?

I have used IIIDmax, polymaker, Jayo, Sunlu, Esun, Ziro, Hatchbox, Paramount, Inland, Eryone, and Novamaker. All were acceptable.