Видео

I was scared to death to reshape my fedora. Thank you so much for showing how easy it can be done!

.

Always buy Japan ( TOTO) brand when it comes to electronics or devices. They’re always 100% durable reliable. Japan cars also! ❤

Why remove the inlet valve?

Thanks for posting! This was a great video with simple instructions. I know I need to repaint the porch of my 100+ year old house, but it's intimidating! Can you tell me what that cute little scraper is that you used? We have many boards by the front stairs that need some attention. (They're definitely cupped, but I'm hoping they don't need to be replaced and can do with a simple scrape/filler/prime.) Can you also confirm that the DAP Acrylic Latex Caulk is paintable? Again, thanks so much!

It looks as if the structure is being supported solely by the perimeter footing. That tells me that the builder did a piss poor job of compacting the site prior to framing.

thanks. identifying parts is greatly appreciated

Thank you! Super helpful!

Are the holes standard on all toilets?

Some close-ups would have been better for those of us who have never done this before.

Thanks sir ❤

Great video thank you

What state is this house in?

This guy is adorable.

Handsome man...

What does “hot lead” mean? Positive or negative? Thank you

Whats the name of them blocks?

You care so brave to get in there.

I tightened my fuel cap and the light has now turned off sweet

Walter White did a Good Job, Painting that Porch!

If you wore a ballcap it would cover up your bald spot.

Same thing, light went on after I filled gas tank, just one day after I got my car serviced with a hefty bill. Went back to the mechanic, and they couldn't turn it off. Found this video and got a new gas cap. The light went off about 24 hours later. Guess the air pressure had to adjust. Mahalo nui loa from Aiea, Hawaii.

Gilmour has a lifetime warranty. I just got mine replaced. I tried fixing my old one before trashing.

Wow, he didn't even wear a suit...He is soo brave because a snake, bugs or animals could have been down there... Meanwhile I would run from a spider or roach...I love him already!!! Real man here, definitely marriage material ❤😄

Good find. Those things happen, the wire clamp. When you take it back apart maybe a good idea to place a few drops of oil on the bearings. I keep our 40+ year old fans going with just a few drops of oil that otherwise would render them not functionable and to most folks, trash.

Hehehe, it has been another 3 years, how is the porch holding up? The "Great" at the end almost made me choke on my coffee. Thank you for this video. It is still helpful all these years later. I can't wait to tackle my little porch. :)

How is it your flooring looks so clean, yet it's been there long enough for the earth to have settled so much?

🎉 subbed. Thumbs up. You're clutch my man. Thank you. This method works for newer models also that have keyless start. Just press the button 3 times for 1 second like you did and then turn on the car. Worked for 2023 Chevy equinox

You skipped over the part I needed to see and that was the washers and spacers. You assumed I would know that part. Wrong! That was why I watched your video.

Thanks for the Video. Had a power outage here last week and afterwards, for some reason, the Damper Control wasn't working, so while the Feezer was staying Frozen the Fridge was staying between 45F-53F... Was able to get into "Service Mode" to run various tests (using the instructions in the Technical Diagram Paperwork from underneath Fridge by the Coils from a Plastic Pouch...). The Damper Control was reporting Open or Closed (and I could "command" it to switch) but it was always staying closed... Also didn't make any noise during the "switch". Took a plastic Bread Bag Clip to wedge into the Damper Door Opening to keep it OPEN temporarily and that was able to finally quickly bring the Temperature down in the Fridge. Eventually decided to see if I could remove the damper control to test if the Motor's Continuity was good/bad... While loosening it from the Tabs I think because the door had been open that the Motor (Door Tab) had been able to rotate back around. So when the Bread Bag Clip slipped/fell out, during my removal attempt, the door actually stayed open and cycled again. It does make some obvious noise now (and looking back that has been "normal" for a while, but it didn't do that during the earlier testing (because the Tab/Motor wasn't "under load"?)... As mentioned in the video, maybe the extra loud noise is because the motor is on its way out? It is about 16 years old/original to the Fridge (2008)... So I'm think it might just be best to just swap it out. If nothing else it might be quieter and hopefully won't "fail" randomly because of a loss of a power loss again. If "that one" fails I suppose I can old onto the original as a "backup"...

I bought a heavy duty one by Orbit. Super simple design. Just molded plastic. Lasted a single season with well water pressure. No way to fix it! I guess the lesson is: don't bother spending good money on these things 😂 Fun video!

Thank you 🙏🏾!!! The noise was giving me headaches every day.

I feel like I'm watching the Bob Ross of chainsaw maintenance. Lots of great information. Lots of happy little cutting edges.

Will the check engine light go away eventually? I didn’t tighten my gas cap?

What bout a push start car?

very useful thank you

Is this the Boya BY-WM2G

Very helpful bu it drives me crazy when someone uses an adjustable/ crescent wrench in the wrong orientation. Sorry, but I'm a little anal when it comes to proper tool use.😢

Great video ! Your helper looks a lot like mine .......

Thanks for the video! Quick question: Is it best practices to install the J57 ABOVE the post like this? I was under the impression that while it might work for connections, it’s better to install it below the post when it’s supporting something. A minor point, but was just curious.

I started driving in the freeway this morning and after 10 minutes my check engine light turn on out of no where.

im struggling with the brim shape of my fedora, its gone flat. any way i could put it to that style shape?

Nice video How much you spend doing this.

Regarding the chainsaw, great video! However on the botanical side, that is not yucca, never has been. That is sisal that has fibers.

In Germany the water connection is behind an drywallin 90% of installations..thats an serious problem. Also powerplugs next to watersources are not often to find because of safetyrules. After my Japan travel I want a TOTO😂

You need a portable air compressor to blow all that dust out of them coils from back to front and then from front to back a few times.

Great video. Thanks.

I have pillows by Scott Living? And it says dry clean only. I have dried clean them at home many times but because I’m such a picking cleaning mom, I want to try to wash them in the washer. I’m glad I found your video. I think I’ll try the washer and follow your instructions. Thank you so much. 🙏🏼

Amazing, just what I needed! Thanks so much

Looks great