Видео

You have the link to these exact ones?

Great video bro , I love the energy 🤞💯

Best remove spark plugs to relieve pressure before spinning engine

Other videos show the belt itself is marked for each pully position so you won't be off a tooth. Maybe some belts don't have that feature. If the one I buy doesn't, I'll return it.

The weight of the oil totally trips me out! 0W-20???? My wife's Tundra says it needs 0W-30. I put it in it once until I decided to give it some extra vitamins and minerals every IC Engine really needs and put Rotella T6 15W40 diesel oil in it. If it's good enough for my new Duramax, it should be just fine for some little gasser! In process of the oil change on my daughter's Rubi now and doing this research for it after getting the T6 oil for this job now.

Great video! Thanks!

The word you were looking for is non interference. The 3.0 is a non interference engine and will not get damaged from being out of time.

Do you have the Mopar link? I can’t find it anywhere

Thank you. Very informative.

Just did mine last week changed all 6 and coils too with oem parts. P0300 came up again yesterday for random misfire not sure what to try next. It started in September and went away and started again 2 weeks ago. I have 107,000 miles on mine. Might try the o2 sensors. Hard to pay for diagnostics when it does not happen a lot.

The driver's side No. 6 cylinder is pretty much the only place the head gasket fails on these. The passenger side never fails nor do No. 2 or 4 cylinders. That pesky crossover . . . .

So I have 20’ JT that came with stock halogens, I bought the same LED headlights + DRL (ring) wiring kit for them. Everything works except the passenger bulb projector when cars turned on. Can I take it to the dealer and have them flash it to fix it? Is this what you did, If so how much? Thanks!

Do you have a pdf file for the instructions to install

The wrangler is the easiest oil change I've ever done. Filter up top and easy to get to. You dont need a lift to drain the oil pan. And everything is easy to access.

Great review!!

13 mm

Isnt there a notch on the crank sprocket and oil pump that needs to line up and that means its at TDC?

You are a brave mechanic… gutsy … good job

Super easy until I can't get the oil drain plug off because the last idiot overtightened it.

Thanks for the video!! Very helpful. I am about to buy tools and change oil myself from now on since dealership charges me $115 + tax for mine.

Just did this on my 1990 today. And yes, the 3VZE is a non-interference motor, so you won't damage the top end if you're off a tooth or two. P.S. is that a 458 Italia behind you?

thank you for the video!!!! much needed help, trying to fix vibration in plastic piece.

Not sure man. But according to their website , you don't have to drill anything. Unless this is older version.

Best review of this I’ve seen. Thanks

Volume not loud enough and video is dark

almost like you know what you are doing...almost. JK...good to know how this could be approached without custom tools.

My weekend "to do " list !! Thanks for the video!!

wow!!!!! what great camera work!!!

Note to self: Don't waste money on a Craftsman torque wrench.

I love New Hampshire bro. "Live Free Or Die" is the best State motto in the USA! Thanks for taking the time to post this video. -Fellow Gladiator owner in Vermont.

Mine broke second day I used it

Did you have to get the dealer to do flash code?

What bumper is that?

For a 2021 3.6L 24 MM for filter 13 MM Drain plug 6.0 Qts for oil with some sources. 5.0 shows almost Qt low. It looks like 5.5 to 5.6 showed full. This is what I got. It may vary for you depending on drainage. Thanks for the effort. Don't know about other years, but this is for a 2021.

Good video. Do you know how can I reset the programming in my Jeep and go back to factory setting if I don’t have the flashcal?

You didn't over fill this one did you like your Jeep, right?

JL 3.6 take 5 quarts. You over filled by 1 quart.

Chrysler should just sell all their vehicles with a check engine light on.

😂you have me and a master degree in chemical science? 💀

Did it hold up to water well

For the front you can just put the transfer case in 4wd to lock the front axel so it dosent spin, parking break won’t do anything

it’s too much work 👍

Correction 15/16

Its not a 22mm for the oil cap its a 1 in or 25mm

A few things everyone should know. Before pulling the plugs, blow all the dirt and small rocks out of the spark plug wells (you can damage the engine, if this trash drops in). Never drop a spark plug in the plug wells, (plugs could be damaged) use a good plug socket that holds the plug or a piece of fuel hose to hold and start the plug. Just because it takes so much work to get to the plugs out, I would of change them and the coil on the cylinder that was misfiring. One last thing, only use OE plugs, these were made by NGK and are Laser Iridium plugs.

😅Did he just say this Jeep is RWD? 4:50

What was the offset of those wheels? Are they around a -12 ?

Couple of observations 1) should’ve removed the oil fill cap before removing the drain plug to promote to oil drain circulation. 2) after adding the oil you should’ve left the car on the ramps then run the engine up to temperature then shut off the engine go back under the car to check the drain plug and oil filter for leaks

So did that work?? Haha!

I have their solo mat for my Bronco. It's literally half the size of the one in your video so you still have room for an ice chest and other gear. I've used it twice so far on single night camps. Super comfortable. I'd absolutely recommend their products.