Видео

Huh, this is a DC-DC converter.

That’s a buck converter capacitor frequency. When I asked Bluetti about it, they replied with instructions for switching the EB3A between 50-60. I've written to them again, asking whether this is a non-issue with DC. @@BrendanHemmings

Hi, this is explained in the description.

Refer to description in video.

@@BrendanHemmings it is a pity that there is no recorded video of the editing somewhere

@@BrendanHemmings Hey, could you find such flashers for me at an inexpensive price because I can't find them like that because unfortunately they are not available in the link?

Water resistant scooters are not at suitable grade for heavy rain. You will eventually get water ingress to motors and controllers electronics.

emove Cruiser perhaps. electric-scooter.guide/guides/electric-scooter-ip-ratings/

@@BrendanHemmings yeah that's what I'm worried about with zero 9. They have the ninebot scooters here for hire, they leave them out in the street here on heavy rain, I know it's not recommended but they seem to survive. I'd never leave mine outside I'm just worried about getting caught in the rain on the way home and having to walk it home in the rain. I did just discover monorims, they have a 48v 500w motor and front/rear suspension so you can modify the Ninebot max, I just need to find someone to do it for me as I don't have a shed with tools here.

I think I described how to in the Facebook group linked in this video.

please i need this aswell !, my front tire is horrible i need a fix soon !

From the Facebook group post linked in description : Repositioning the tyre and placing a counterbalance weight successfully stablise front wheel. Initially I rotated the tyre 180 degrees which made things worse, then rotated a further 140 degrees and almost perfect! I then taped up a bolt/nut and zip tied it to the opposite side of the valve stem and it's now perfect :) On several occasions I skewed the position of the tyre prior to inflating as there is some movement possible regardless of rotation, so several movements in combination are required. Holding a permanent marker to touch the "bulging" parts makes identifying areas to shift quite easy. Note, the slight imperfection remains on the rim, but this is within tolerance as overall the wheel remains balanced.

How to: ruclips.net/video/l7T0mHyGMFI/видео.html

Post remediation video posted here: ruclips.net/video/305jHx6Y6QQ/видео.html

@@BrendanHemmings does "Remediation" mean applying balance weights ? , sorry my english is not the best

@@senkec21 Remedy (to fix) unbalanced wheel.

Yes you could certainty install a switch across the speed limiter cable (typically grey on Mantis Pro from memory) such as a rocker with waterproof hood on the side channel the deck. I've also seen on various facebook groups of remote activated switches for power switching purposes, and same could be applied to speed limiter.

@@BrendanHemmings So lets say, you can simply disconnect grey cable, remove connectors from both ends and solder them to a on/off switch and it will be working without anything else? Since basically connected cable means limited, disconnected non limited, so on/off switch should work in theory same way, just dont know if it wont short anything and if simple waterproof on/off switch is okey or do I need to know anything else.

@@TheChazas Yep that all there is to it! Here are some relevant posts on the matter: m.facebook.com/groups/500807840665963/permalink/892942548119155/ m.facebook.com/groups/1066541750415033/permalink/1199217303814143/

@@BrendanHemmings Thank you very much. I will have a look. Also looking forward to more content of yours and more mods on Mantis. Wonder have you done anything else like changing, upgrading the bolts, sealing waterproofing the deck and such or I missed it.

Etwow is not in our Australian market and limited import options. I have since moved to a Mantis Pro.

Just three usual way. Make sure your controller has the parity switch on correct position and the laser fixture has correct channel.

@@BrendanHemmings Thanks !

Yes with fridge in ECO mode and with a low voltage cutoff on the source battery. No on the switched mode power supply.

Hi, Zero 9 is a lot wider which makes it more stable. Hard to go back to a 365 due to this.

@@BrendanHemmings Sorry, bro. What I wanted to ask is the height of the total handlebar (from the base of the scooter to where you grip). I leave you this image so you can understand me, I do not speak English very well cdn.gethypervisual.com/images/shopify/c520364d-27dd-4b71-a48b-e788c20359d7/w1200_53ba_zero10-measurements1.jpg Thanks from Argentina!

@@augustoabd9130 93 vs 97 cm on Zero 9 when fully raised. That's from top of deck to centre of handlebar.

I don't think they are mounted incorrectly. The video is reversed, but that should't make them appear installed reversed. The grips are these ones, without the "hook": www.meetlocksonline.com/products/meetlocks-bike-handlebar-grip-bicycle-parts-durable-anti-slip-mountain-bike-accessories-rubber-mtb-cycling-bicycle-parts-1-pair

Hi, in the past 12 months I've had about 5 flats. I posted a video yesterday about tyres. ruclips.net/video/l7T0mHyGMFI/видео.html

Yes, big difference and one of the reasons for an upgrade, although at the expense of consuming power. If you have a lot of hills on your journey, you may wish to consider if you have enough battery capacity. A year on I'm chasing a bit more grunt again and going with a Kaabo Mantis Dual or Dual Pro.

No issues with the law enforcement here in Brisbane. No accessories.

Brendan Hemmings ok but questioning rather if there is a safety risk of the charger igniting as found in Singapore that brought in a change to this certification.

@@glennwilliams9941 I've not seen any reports of Zero scooters catching fire, and I frequent as lot of Facebook groups and did a lot of research on them on the internet and didn't come across and fires.

@@glennwilliams9941 I don't think there is a problem with Zero scooters with the certification, it is just a matter of paying the money and getting it certified. I was looking at buying a Zero 10 X in October/November last year, it wasn't certified at that time but it got certified near the end of November. The Mantis I have right now wasn't certified late last year but it is now certified. Between 8 and 9 I would go for a 9 because it has better suspension, better brakes and to pneumatic tyres means better ride comfort.

The sale was quite special, but even when there is no sale Falcon PEV are several hundred cheaper than anyone else - they are the creators of the product.

Nope, the internal diameter is different. I have had some success with using M365 tubes even though the M365 stems stay inline rather than pointing outward like they do on a Zero 9. You can get away with a M365 45 degree on the front of Zero, but will struggle on the rear. The Zero rear really needs 90 degree pointing outwards.

I imported mine from Falcon PEV, not caped. Local sellers tend not to limit speeds on any brands. Easy to remove limit on a Zero anyway.

Brendan Hemmings how would you remove capped speed on the Infinity 8

@@lavarball7538 google search for it, I believe you cut a great wire and ensure you have appropriate p value in settings.

Streaming to mobile phone is only 720p. Footage saved on SD card inside is 1080p.

@@BrendanHemmings thank you and so..is automatic,while have sd card in the camera is autmatic record in sd when u press record and no more on Phone or u got an option to switch ? sorry i am real noob

@@ANTIBATAR It's one of the other - you can't save the footage to both.

@@BrendanHemmings thank you i just bought a best samsung sd for 4k recording so for 1080hp i shoulg get max even we will never got a similar video than an action camera,the problem is when i put an go pro or eken,is already to heavy to fly,,i will bouth the bugs 3 for and put a go pro or eken,the bugs 5 i will use only for pic,as the gps working very fine,when the done not move quality pic are not so bad or even video.thank you again..( when got money i would kike the xiaomi mmi 4k drone,he is is sale at only 400$ right now grr)