- Видео 445
- Просмотров 428 165
Holly Hill RC
Великобритания
Добавлен 17 дек 2012
6 Year Old Project Gets a Restart
I've been working on this on since 2018 and it's been a stop start type of project over the years but now I feel Im making some positive progress.
Просмотров: 260
Видео
Axial UMG Kit - Building & Fitting The Body
Просмотров 8114 дней назад
It's been a long time since I worked on this but after buying it two years ago it's finally finished, well almost ..... Link to the chassis build video ruclips.net/video/XfDHsMAj61M/видео.html Spec: Hobbywing Quicrun Fusion Pro 2300Kv Motor ESC Combo Reedy Power 1523MG 15KG Water Resistant Metal Gear Servo Spektrum™ STX2® Transmitter & Spektrum™ SRX200 Receiver
Traxxas TRX-4M Bronco Upgrade Run
Просмотров 111Месяц назад
This run features one of my 1:18 scale TRX-4M Broncos. I bought this one used from a friend who installed most of the upgrade parts listed below. I added the pro light kit, a set of 3D printed inner fenders & full 3D printed interior, and a driver. I also put some Losi Green Slime inside the shock bodies to make them smoother. This is my new favourite small scale RC. Thank you for watching and ...
MN82 LC79 New Metal Upgrades For The Rear Suspension & Test Run
Просмотров 958Месяц назад
I bought the latest upgrades for the rear suspension of my MN82 LC79 Toyota. This video includes a brief summary of those parts, a test run, and my views about whether they are worth buying or not? MN82 LC79 Toyota 1/12 Scale. Upgrades & Mods: Front & Rear Metal Axles with Metal Gears and Metal Bearings Metal Steering Links Metal Upper & Lower Front Suspension Links Metal Axle Truss (for front ...
Tamiya Hotshot - Off Road Adventure 2024 re-edit.
Просмотров 2612 месяца назад
I sold my Hotshot last week so I thought I'd upload one of my favourite videos of it I originally made in 2018. I was sad to see it go but it wasn't getting used so it was time to move it on. Music: Broasted or Fried by King Hector & The Soul Dynamites
Traxxas TRX-4M Testing Different Motor Options
Просмотров 1433 месяца назад
In this video I try three different motors in two 1/18 scale Traxxas TRX-4M Broncos.
MN82 LC79 Installing Mods & Metal Upgrades
Просмотров 9 тыс.3 месяца назад
MN82 LC79 Toyota 1/12 Scale. PLEASE NOTE: I made a mistake in this video. The Grub Screws I used for the prop shafts are M3x4mm NOT M3x5mm Upgrades & Mods: Front & Rear Metal Axles with Metal Gears and Metal Bearings. Metal Steering Links Metal Upper & Lower Front Suspension Links Metal Axle Truss (for front suspension links & servo) Metal Shocks (front only, not oil filled) Metal Front Shock T...
MN82 LC79 Toyota Trail Run (My first MN RC)
Просмотров 7084 месяца назад
MN82 LC79 Toyota 1/12 Scale filmed in real speed. Upgrades & Mods: Front & Rear Metal Axles with Metal Gears and Metal Bearings. Metal Steering Links Metal Upper & Lower Front Suspension Links Metal Axle Truss (for front suspension links & servo) Metal Shocks (front only, not oil filled) Metal Front Shock Towers Metal Gear Set (gearbox transmission) Metal Prop Shafts M3x5mm Stainless Steel Hex ...
Farewell my RC friends.
Просмотров 4244 месяца назад
This is a little homage to some of the RC's I've sold over the past few years. If it's a photo, I didn't run it while I owned it. Tamiya Blitzer Beetle #58122 Carisma Scale Adventure MSA-1E Coyote Pup Tamiya DF-03 Dark Impact Axial SCX24 1967 Chevrolet C10 RTR Tamiya DT-02 Street Rover Carisma M48S Porsche 959 1/8 Scale Tamiya DT-02 Holiday Buggy Carisma Scale Adventure SCA-1E 1976 Ford F-150 T...
Traxxas TRX-4M Bronco Upgrades & Test Runs #traxxas
Просмотров 1694 месяца назад
Holmes Hobbies Torquemaster 180 Size 87T Brushed Motor for TRX-4M #110100123 Traxxas TRX-4M Low Range Transmission Gear Set #TRX9776R Traxxas TRX-4M Ford Bronco Pro Scale Light Set #TRX9783 Injora 1.0" CNC Metal Beadlock Wheels #W1022 Injora 13g Brass Internal Beadlock Rings Rock Terrain 57mm x 25mm R1.0 Soft Crawler Tyres Fastrax Inner Fenders 3D Printed Interior from Thingiverse designed by a...
FMS RocHobby Mashigan: Hobbywing Fusion SE System: Mods & Upgrades Part 2
Просмотров 1,1 тыс.4 месяца назад
In this video I upgrade all the electronics. I also take apart the gearbox, transfer box & diffs and grease all the gears. Music: "Reborn Me" - Artist Unknown (Wondershare Filmora Music Library)
FMS RocHobby Mashigan Mods & Upgrades Part 1
Просмотров 4455 месяцев назад
This is my new FMS Roc Hobby Mashigan which I got for Christmas, and some changes I've made to it over the past three months. Thank you for watching.
Axial SCX24 Deadbolt Metal Wheels & Tyres Upgrade Ramp Challenge
Просмотров 1045 месяцев назад
Axial plastic wheel and glued tyre (without foam) combined weight = 11g each Axial "Nitto Trail Grapper M/T" tyre = 54mm dia & 16mm wide. Metal beadlock wheel, metal inner ring, hardware, and tyre (with foam) = 25g each. Injora "S3 Super Soft Crawler Master All Terrain T/A" tyres = 61mm dia & 21mm wide.
Insta 360 GO2 A Different Perspective
Просмотров 1236 месяцев назад
Insta 360 GO2 A Different Perspective
RC4WD 1/18 Gelande II RTR Black Hawk Winter Run #rc4wd
Просмотров 2638 месяцев назад
RC4WD 1/18 Gelande II RTR Black Hawk Winter Run #rc4wd
Tamiya CC-02 Ford Bronco 2021 Kit Build
Просмотров 2,3 тыс.9 месяцев назад
Tamiya CC-02 Ford Bronco 2021 Kit Build
WPL C34-KM with WPL C34-1 Conversion Kit
Просмотров 19210 месяцев назад
WPL C34-KM with WPL C34-1 Conversion Kit
Tamiya Midnight Pumpkin - First Run
Просмотров 42311 месяцев назад
Tamiya Midnight Pumpkin - First Run
Axial Yeti Can-Am Upgrade Fail & Fix - Did I really need all the hop ups?
Просмотров 25611 месяцев назад
Axial Yeti Can-Am Upgrade Fail & Fix - Did I really need all the hop ups?
Axial Yeti Jr Can-Am Maverick: Repairs & Upgrades
Просмотров 1,1 тыс.Год назад
Axial Yeti Jr Can-Am Maverick: Repairs & Upgrades
Axial SCX10ii Unimog Kit Part One - Building The Chassis
Просмотров 426Год назад
Axial SCX10ii Unimog Kit Part One - Building The Chassis
Axial SCX10-3 Early Ford Bronco Summer Run
Просмотров 210Год назад
Axial SCX10-3 Early Ford Bronco Summer Run
7 Year Anniversary Run with my first RC - New Bright Dodge Hemi
Просмотров 215Год назад
7 Year Anniversary Run with my first RC - New Bright Dodge Hemi
looks awesome. i really like this rig , shame axial seem to have abandoned so many unique cars like this and the ford f50 as well as the old wraiths , etc
Hello mate. Thanks very much. You probably know I'm an Axial fanboy but I think the brand started to go downhill when Horizon Hobby took over in 2018 as far as their sales technique is concerned. They still produce good RC's but they discontinue them so quickly now which is something I just don't understand. Even my SCX10iii Early Ford Bronco has been discontinued and that was only released 3 years ago! All it does is create over inflated second hand prices which doesn't benefit Horizon in any way as far as I can tell? The 2.2 Wraith was probably among Axial's best selling RC's before Horizon took over and replaced it with the Bomber, and Horizons 1.9 Wraith looked like a Wraith Spawn and Deadbolt mash up which I didn't understand at the time. But why they discontinued the UMG 4X4 will baffle me for the rest of my days because it's quite unique in the RC world, and it's one of the only Axial kits that wasn't also released as an RTR which was a massive mistake in my humble opinion. Rant Over 😁👍🏼👍🏼
@@hollyhillrc i agree mate . they use to have a huge range now it’s mostly jeeps . The sad thing is i just don’t really see much of their stuff i actually want . I wish i had got that ford f50 agmonst others but oh well 🤷♂️
🙂👍
Thanks Jan 🙂👍🏼👍🏼
Hi Derek and good to see you are getting your RC mojo back with this fantastic project! I think we all have a couple of projects on the back burner! Loving that Raptor body and so nice to see you endeavour to find a solution that doesn't involve hacking that lovely body. Also nice to see you being frugal with the spend, something I always do! Can't wait to see it finished, but don't rush, it's been a long time coming my friend! Cheers! :D
Thank you very much Mark. Frugal is my middle name mate 😁👍🏼👍🏼
Great car and project Derek👍
Thank you very much Dirk 🙂👍🏼
Nice project, this may end up a very nice rig mate
Thank you very much Julian. I hope so 🙂👍🏼
Nice project, I was thinking when you did not like the shock kit, same they did not do a flat suspension conversion and then you get the BOM chassis out 🙂I agree not taking the killer body off the other BOM and buying a second kit. Selling on the body is they way to go, using those electric good way to use items you have just collecting dust. Looking forward ro seeing it finished and out for a run.
Thanks Mal. I did look at the newer GMade chassis kits but this one was only a few ££'s less after the discount and will hopefully work out a lot cheaper if I can sell the body set etc.
@@hollyhillrc Funny thing been working on the Bedford and finally got the cab painted. That chassis is a GMade and it broke, a screw pulled out it was the panhard link and suspension hoop. Not pleased, but managed to trim the plastic and get a not on the end. Because of the weight I have put longer screws and nuts everywhere on the steering.
Should be worth the wait.......get-r-done!
Thank you very much my friend 🙂👍🏼
Good deal. Some real thinking going in to it.
Hi Gary. Thank you very much my friend. Hopefully it will be worth the long wait when it's finished.
Nice project I am waiting to see part 2 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
Thank you very much my friend 🙂👍🏼👍🏼
big thumbs up!
Hi Martin. Thank you very much my friend.
Is Mn 82 fully proportional like hobby grade ?
Hi yes it is 🙂👍🏼
Nice run mate 😎 Love the little Traxxas rigs 👍🏁
Thank you very much 🙂👍🏼👍🏼
Hi... the 8:33 5mm screws are M3? Thanks!
Hi. Yes the grub screws I used for the prop shafts are are M3, but I made a mistake in the video. They are M3x4mm NOT M3x5mm. Thank you very much for watching 🙂👍🏼👍🏼
@@hollyhillrc Thank You!
You're welcome. Happy to help 🙂👍🏼
Great work Derek. Can't await to see it run
Thank you very much Dirk 🙂👍🏼👍🏼
Great paintjob i think.looking very nice the UMG 👌😊
Thank you very much Jan 🙂👍🏼👍🏼
Looks fantastic! I can't wait to see it running!
Thank you very much.
Cool rc
Thank you very much.
Nice it's finally finished. I do not know why they stopped making it, they could have put this body on a later chassis.
I agree Mal. It was very popular and I think it's the only Axial kit that doesn't have a RTR version? Very strange.
That looks awesome Mate.
Hi Sean. Thank you very much my friend.
Lovely build and a nicer truck than that cross Unimog i had, you done well Delboy
Thank you very much Julian. I love my Axials and this was an excellent find.
Great channel & love the build of this, Think i might be getting one myself as love the Unimog's.
Thank you very much 🙂👍🏼👍🏼
Wow just wow. I'm so glad it's finished Derek. You done a fantastic job and I'm glad it went to a home I now know was the best place for it. I'm gutted I sold it but glad to see it finished. My mk-07 has similar fixings for the body on rear hinge and front locators. Keep up the good work bud.
Hi Rich. Thank you very much my friend. I'm happy you like it and it will be well looked after.
Very nice details looks like a hard body 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
Thank you very much my friend 🙂👍🏼👍🏼
does it lift the body to accommodate 70mm tires?
Hi. Thank you for watching. No these upgrades do not lift the body.
nice run mate👍
Thanks Dom 🙂👍🏼
1:12🎉🎉🎉
Thank you
Nice 👍
Hi. Thanks very much 🙂👍🏼👍🏼
i have same rc and im wanna know how you make the body to long. can you spill in another video ?
Hi. Thank you for watching this video. I didn't build the Troopy but I give a brief explanation how it was done in my other video ruclips.net/video/nCDNQzXDz3s/видео.html
Wow nice looking truck awesome video truck looks like 1/10 tires and wheels are sick ✝️😎🙏🏽☮️
Hi Lou. Thank you very much my friend 😃👍🏼👍🏼
Nice rig and music 🔥👍 I subbed
Hi. Thank you very much, and thanks for the sub too 😀👍🏼
Hi Derek, it looked like Harry was enjoying his ride! I gotta say, for such a small scale truck, this looked to float along over the terrain more like a 1/10 scale! Very impressive and lots of lovely details. Great video mate. I hope you are doing well, all the best. 😎😎👍👍
Thank you Mark. It's a nice RC to drive stock but the Injora motor is smoother.
Nice run Derek. This thing has had a lot of upgrades added. Cool little truck matey 👍
Hello mate. Thank you very much. This was the first time I've run it properly and it went really well. The Injora motor is a nice upgrade and one I'd recommend 🙂👍🏼
@@hollyhillrcexcellent 👌
Nice work man. Btw is the new leaf springs (the longest one) have the same length as the default / old one? Really appreciate if you have time to check and answer this. Thank you
Hi, yes they are exactly the same 👍🏼 Thank you very much for watching 🙂
Hi,what grease you use? And did you use grease on the new metal axels?:)
Hi. Thank you for watching my video. The axles came with a little grease but I did put a bit more on the diff gears before I installed them on the MN82. This is a link to my video which shows this ruclips.net/video/At3xmAcosO0/видео.html I've been using a long life salt and fresh water resistant marine grease which I bought from a boat chandlery years ago, but most brands of marine grease online are the same. It's thicker than the usual "RC grease" but it works well and I've had no problems with mine all the years I've been using it.
Thanks😊
You're welcome 🙂👍🏼
Ah yes a great vid and a very nice looking truck but it's a Traxxas so thumbs down I'm afraid mate 🤣
Bwahaha 🤣🤣🤣 Excellent comment 👍🏼👍🏼
Beautiful bronco 😃👍 The black is awesome 👌 Nice landscape ✅️
Hi. Thank you very much 🙂👍🏼👍🏼
Runs smooth like butter! If you don`t mind, wheere is this location, looks similar to ours in Bavaria 🙂
Hi. Thank you very much for watching. The Injora 48T 180 pro motor is a good upgrade. The location is the south coast of England 🙂👍🏼👍🏼
Epic! 'nuff said! 🤠
Thank you very much
big thumbs up
Thank you very much Martin
Nice mii trail mate, sweet little rig
Thank you very much Julian
Nice Bronco, runs very cool Derek
Thank you very much Dirk
M, you build nice rigs...
Thank you very much Gary
Nice bronco 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
Thank you very much my friend 😀👍🏼👍🏼
Nice run with the Bronco, good to get out with an RC. I've been limited with the hot weather and killer sun 🙂
Thanks Mal. I took the Bronco out to the woods with the MN82 last week. It was very hot so I filmed the MN82 going up the trail and then filmed the Bronco coming back down the trail. I wear long trousers and long sleeve tops in the woods because the Mosquitoes love to munch on me so I was sweltering when I got back to the car. I've been sat in front of a big fan sucking ice cubes watching the Olympics ever since trying to recover 😄
@@hollyhillrc I have the same trouble with gnats, I keep covered up. I'm in front of a fan as well, but not sleeping longer than 2hrs at a time at night between 2hrs up.
I was getting ready to paint one orange or mint green and found this video. I’m leaning towards orange now
Hi. Thank you for watching this video. Personally I think orange adds to the retro feel of the RC.
Wooow, awesome and fantastic video 🎉🎉🎉🎉🎉 Thanks for your valuable content 😊😊😊 New friend and subscriber 🇸🇻 🔥 😊
Thank you very much 😊
Hands down the best explanation of repairing or checking
Thank you very much 😀👍🏼
This is interesting. I want a 1:12 chassis on which to build a project, and fsncied this one for the leaf springs. Now I realise that I'd immediately have to upgrade them, I'm wondering whether to get an MN45 instead,, coz that would come with a body I like more. Hmm...
Hi Del. The set of metal leaf springs only cost £3 so not an expensive upgrade. But upgrading this with all the metal parts was a personal choice and not a necessity. Many people run these stock and are really happy with them and the proportional electronics in this are a lot better than the MN45. I don't know the dimensions of the MN45 but I wonder if the body would fit on this chassis? Thank you for watching and I hope you are enjoying the summer my friend 🙂👍🏼
@@hollyhillrc I love your videos - you're the master of the tracking shot!
nice upgrades and video
Thank you very much.
Nice work, I enjoy your depth of knowledge and logic 👍 would love to see an update on the Mashigan sometime. I've disassembled mine getting ready for white paint. Best to you!
Thank you very much my friend. I haven't been doing a lot of RC lately and there are lots of jobs I need to get on with. The Mashigan is on that list 🙂👍🏼