Видео

@@ooscar7135 thanks mate! Have had a bit on, hopefully have some out soon

Maybe one day. It is currently testing my patience, so wont be getting any presents for a while 😅🤣

They are farm Utes not a race car by any means in there standard form. There is definitely a few around that make an exception. ruclips.net/video/AD0EBi8tJT0/видео.html

I just go look at something and get the fine tooth comb out. Tell them all the problems it has. Leave and then the next day send them a low but realistic offer

People normally think there car is worth more than it is. Or try to hide its problems. Doesn’t always work

Thanks mate!

Thanks mate, I have it’s a pissa! Now I want to make one 😂

They are perfect first cars. Easy to work on and are unbelievably capable off-road

@angryengineering yeah, I got mine from a farmer who had bot taken very good care of it, but the engine still runs beautifully. My dad and I are working on fixing the brakes and suspension and other stuff, but it's still a great car.

Thanks mate!

Awesome mate! It’s great to see them out and about

Yes they do!

@@angryengineering thanks mate, I'll order some shortly!

Thanks Mate! I have a 2 inch lift and currently running 195r14c nankang muddies on 14inch sunnys

And is it?Is the Brumby's gearbox better than... The ej gearbox for Who is the best?? Is it a gearbox? ej Installed without modification to the chassis

@@AbuFleafel I'm still running the brumby 4 speed, clutch and flywheel. The flywheel had to be drilled to suit the ej flywheel. Ej gearbox would great but also more expensive to do

No Worries!

I would if I still had my rex 😂

@@angryengineering Brumby v Brumby 😉

The cheapest craft paint bunnings had 😂 then I went over it with some cheap clear coat

They definitely tests your patience’s 😂 Worth it though!

@angryengineering lol yeah I wouldn't have the skills tbh I'll probably just try find a built one to buy

@@l33tyeet There is a good one for sale currently in qld with all the gear!

@@angryengineering oh nice got a link?

Will an ej25 work aswell of just the ej20?

They are great engines!

Got no idea man 😅😂

@@angryengineering haw did you do with your ej?

@@yusfalassd3897 I’m not sure what you mean?

@angryengineering I mean how did you manage to connect all the wairs and start the engine. Did you have a plan or something?

The truth is I'm currently working on the ej16 project and I've finished everything except the wairs on the motor and I'm trying to shorten all the unnecessary ways and wairs

I didn’t rewire them. All I did was swap around the pins in the connectors. The out side light will have high and low beam. The inside lights will only be high beam. You might have some other issues

@@angryengineering ok thank you for clearing that up would it be possible you can attach a written diagram of how you re pinned it just so I can get a visual thank you Oscar

@@angryengineering is it possible to have the outer light work as a high beam and then when I switch to high beam have all 4 headlights work as high beams simultaneously?

@@oscarenriquez4836 to my knowledge you can’t. You could easy have the outside lights on high beam (instead of using low beam) but when you switch them they will dim to low beam and your inside lights will be high beam. I just have mine set up the same way as factory. Compared to the original, it’s a night and day difference anyway

@@angryengineering so if I am looking at the outer headlight connector face on. How is it pinned ? And how does it need to be re-pinned for the new led headlights?

😂😂

No more restless nights… or days

Hopefully this year is a bit kinder on them 😂

👌🏻

You were on to it quick 👌🏻

I definitely want to do the five stud conversion, hopefully have some more stuff like that in the new year

I’m pretty sure all ejs have similar blocks. If you were the run that engine with the standard gearbox you would need an adapter plate for the bell housing

It done very well but I’m still finding things it broke haha. The lowest tyre pressure I run was 20psi any lower and the diff would of touched the ground

The cheapest 2.5 inch muffler I could find on eBay 😂. It’s not baffled so when you rev it, it blows up your ear drums. I wouldnt recommend I’ll be changing it or adding another muffler

I wouldn’t recommend red back either have seen them rust out in under a year

😂😂

Thanks mate, I think it turned out pretty good 👌🏻

McFacts 😂

It takes a while for it to lose its prime 😂

😂😂

The noise the fan blades make is terrifying. I like the idea of the propane mix. I was just going to run a carby off a bigger cc engine and make a restricter plate for it (to limit air).

@@angryengineering might work though the restrictorplate allso restricts vacuum (unless you put the/another restrictorplate in front of the trottle) less vacuum prevents the extra fuel needed from being sucked up out of the fuelbowl might need to play with the ignition to (think it was advancing it) to get the maximum out of the nitrous it can be done , i seen redbeard garage test it on a go cart , he used one of those small cilinders they use on whipcream canisters ruclips.net/video/Da5xNFDaq34/видео.html&ab_channel=RedBeard%27sGarage

@@watahyahknow was going to run restricter plate in front of the throttle, just to limit the amount air but still have the increased amount of fuel. I’ll have a look at that video, if seen a few of his other videos on building high rpm engines. I’m not to stressed about changing the ignition timing. If I get that into it, I’ll start the whole project again and make the entire thing less shit haha

No I could not 😂

@@angryengineering 🤣🤣👊

I do like BOOST

10 years in a workshop, you pick up some bad habits 😅

Don’t feel like pulling the engine out of that when the nitrous melts the pistons 😂

With the lift installed the cv’s are still at the factory angles. The engine mounts were worn causing the engine and gear box to cock up. Touching the cv on to the steering shaft and cutting the boots off. Before I’d noticed (from driving all day) the cv would have no grease left and the cv joint would be destroyed. I’ve replaced the engine mounts and now the problem is fixed

100%

The never ending story of my life. I’m waiting for parts 🫢

My wife

@@enriqueHndz 👍