Видео

Big thank! I have been looking for this egzactly!! Thx!

gracias..... como lo configuras en ableton... genial esto gracias.

Just what I needed. will see if this works with ipad

Thank you so much for this video, very helpful! Im using Ableton live 11 and cannot get my RC600 to work. In the preferences it comes up with error messages under Driver type, audio input device, and channel config. Ive downloaded the driver off the boss website for Mac os 14. In my mac system settings the audio is coming through loud and clear. Ive configured the pedal basically the same as the output settings shown in this video. But in Ableton it doesn't want a bar of it. Any help/wisdom would be greatly appreciated! have a great day!

in ableton, none of the routing works, chose asio as driver, rc 600 as input and output device, activated all the input and output ports of rc 600 in config. No matter which port I chose in the audio track ext in and ext out, the track records all the instruments and uses main output to throw sound out.

my pc shows ins1, ins2, mic1 and mic 2 in output options; and in input options it shows main output, sub output1, sub output2 and phones. why is my pc recognizing inputs in rcc 600 as outputs and vise versa in vendor mode?

Hey! Thank you for this amazing video. I have a question I'm having difficulty routing the output. Can you give a bit more info on how you do it? I have a PA system I use that is usually connected on the Main (mono) of the RC 600. Since the main is noe used for the mic, only that comes from there. I would Ideally like to have audio out directly from the program ( Cubase pro) to the PA. I tried using the inst2 for that but doesn't seem to work. I can use the headphones as an out for getting all of the sounds live, but if I want to mix/ edit afterwards I need to switch drives and connect the PA through bluetooth to the laptop. Do you have any suggestions?

Awesome. Just awesome man

How did you get the different tracks on the rc600 to correspond to the daws tracks?

How do you connect? What cables do use? Regular usb-cables, or do you need some unit between? Thanks for help. 🙂🤘

On my 300, Instead of setting 2 tracks to Auto I set 2 tracks at 1 measure and one track on Free… I start with the simple rhythm and then play my chords on the free track for 4 to 8 measures. I wonder if this would allow the free track to actually be free on the 600? I’ve been considering upgrading to the 600.. so this workflow is somewhat important to me. Thanks for the useful video

thanks for sharing, great way to mix the levels in the DAW.

Hey french boy lost around here, got the driver and all working, but i'm lost with the routing on my DAW (I use Ableton), was wondering if you had time to help out because there's not that much ressources around. Goal is to be able to have a Guitar -> amp -> RC 600, a drum module in mono, and being able to record VST piano to the RC 600 so it can be recorded on a loop. Was kind of working with my previous setup but i'd like to try yours, it looks like it would solve a lot of problems that i encounter

Just a question for anyone that might know - I managed to get this setup working in Logic Pro (which I'm super stoked about!) but I've notice that the volume level of the tracks that arrives at the computer via usb is substantially lower than what goes out of the main outputs or the headphone output on the RC600. Does anyone know about the quality of raw audio that gets sent via USB vs the quality of the audio when listening through a preamp? Even though this works I'm still tempted to invest in a 6 channel interface so that I can gain in each track in nicely on the interface. Or should this not make much/any difference?

Broo! Thank you for this information! I couldn't find this out anywhere else. What a legend.

Bro question. In the yellow wire for your output. You can hear the guitar put there also or just the vocals? because you have separate output for guitars. Please answer this. Thank you. Such a good help

hii, i dont have this problem... i chek it out when i' m home, whats de difference.. but i found out that its not possible to go dirrectly from rec track one, to rack track 2 and to rec track 3...

Ccan we do that via Ongsong? Anyone?

When using my microphone I have no problems getting an input, however with guitar, I am not getting any input signal at all, no display any sound is coming through on either the RC600 itself, or cubase. It's extremely frustrating, tried for 4 hours now, no luck.

Man, you are the best. Thanks for your video.

Hey great video are you south African?

How have these been live. I broke my custom fit and I need a backup while they get repaired. I need ambient sound isolation because I am a drummer.

Hey. Can you help me with a Rc t00 midi problem?I want to use my Rc 600 as a midi controller. To control some simple things in stage Traxx 3..an lirycs app..the best app. Thanks

Cheers bro!

Any advice using this technique with GarageBand? I can't seem to record a whole song recording each loop within their own respective track. Also, my instruments all keep going to the same input channel.

Well said! Love my boss products as well.. RC500 , and the Bluesdriver… and a OC5 for guitar to bass ..

Just wondering if you have messed around with the sample rate and audio drivers to achieve a better latency since this video and what is the lowest ms you could achieve? Thankyou for the video it's really helpful.

I’m having an Error in my new rc600 system error lc1258 . I updated to the latest firmware and it still give me the same error. In general I wanted to know. Do you have a lot of issues still , with your rc600?

Thanks for sharing this.

Hi! When I select the routing in rhythm it only appears Main Sub1 and Sub2, opposed to your Main L and R, Sub L and R etc, its the latest firmware, what is happening?

I have absolutely no idea what you just tried to show me…

Helpful! Thanks!

Hiya, I've ben trying to do this, and gave up. I'm using the VE8 for harmonies and the few vocal loops I do, and that goes straight to the mixer, and that's all good. I did want to use the delay/chorus on the VE and free up the RC effects for other things, such as dist, boost, etc, etc. However, the noise! The sound coming from the VE8 into the RC600 is so damn hissy and scratchy and so I've just bypassed that completely. I do have a Stymon Big Sky in that chain - Ve8>BigSky>RC600. Noisy even when the BigSky is bypassed. Any clues????

Thanks so much. Super helpful!

I have a question: I have a Boomerang looper that is really nice because I can record one track, and the other track will be automatically any multiple of that track that is really useful for me, So track 1 my ref is 1 bar, track 2 my bass line can be 4 bars and track 3 my guitar chords can be 8 bars, is this possible with the RC 600 ? I have also the RC300 and I cant do it. THANKS

Really helpful video - thanks!

Think I understood you saying that these have a fairly flat tunning. Bass to treble is all close to Same sound level?

Program changes are a breeze in ForScore, if anyone needs help, pls ask.

Nick, You totally saved me on this subject. I do it a bit differently in ForScore than you do (I don’t have a midi controller btw). BB dictates to have 2 lines of hex code for setting tempo, 1 for CC126 and 1 for CC127. There are a couple of examples of what to do right inside BB. For a tune with a tempo of say 100 bpm, the first line of hexcode is B2 6A 00 (my BB is Ch 3 btw) and the second line is B2 6B 64. The examples in BB say to enter the actual bpm at the end of the hexcode, but you have to convert the bpm to hex (100 bpm = 64 hexcode). Works like a dream, it’s mind blowing, esp since I had given up trying to make this work. Until I saw your video, I had no clue about hexcode and how you can easily convert it to what ForScore needs. Now my Forscore is setting the tempo, setting the drum style and setting the tones on The Helix LT. It’s pure magic!!! The next step is figure out how to send a Midi out from BB to Forscore to get Autoscroll working. Thanks so much. Dennis in Vancouver, BC.

I'm using a Boss VE 500 outputs into the RC 600 but will have to experiment how to balance the guitar and vocals..strange there are no videos on this particular set up.

Hey Nick thanks a lot for the video! clarified many doubts. Now the problem I have is that the output comes from the sound of the daw (pc) and the sound of the guitar passing through the pedalboard as if it had no USB. For example: if I use the guitar rig for effects, the sound I hear is the guitar without the effect and the guitar after the plugin effect. Both at the same time. Do you know what it could be? Do you also have this result? thank you again!

I highly recommend using the original asio4all driver, not the boss rc600 driver. It uses smaller kernel buffer so you can go <10ms easily. On top of that if your device crashes or disconnects because you stepped on a cable or whatever, it will automatically reconnect via asio4all while the native driver will force you to reload (reselect) the device in your daw (at least in mine- I use Studio One)

this is misleading, there are 6 inputs and 7 outputs. how is that 8x8?

Hi, the looper is always last in the chain obviously, but where would you put the VE-8 if you have other pedals? I have a harmoniser, big muff and echo that I use outside of the ve-8 effects, (I tend to use the ve-8 vocal effects and guitar presence) any recommendations?

Nick… thank you so much for putting this video up!!! I struggled for longer than I care to admit to get the single tracks to start at the beginning of each one (i.e. Intro, Verse, Chorus, etc.). I had the LOOP/PLAY set correctly to “LOOP END” as described in various other videos. But they forgot to mention that I needed to switch each track mode to “measure”. I had it on “loop end” which I assumed was correct and seemed logical, but it obviously did not work.

Bro just ordered these after 10 years of making music on my 5.1 speakers. I am so excited can't wait to unbox mine!

where do you get the caps that are over the foot switches?

Hi Nicola, you helped me a Lot! Thanx!

Hi Nick, thanks for this video! I used your technique to try to turn the RC600 into an 8x8, but to all intents and purposes, it seems like only 7 'true' outputs are possible. It seems that headphone stereo output cannot be delinked on the device, unlike main output and Sub1 and Sub2, which can be delinked. (When I click ‘menu’, ‘output’, ‘setup’, I can delink the main output,Sub1, and Sub2, but I can’t do the same for phones.) So, I can get tracks 1-6 all outputting individually in my DAW using input 1-6. However, whatever I choose to put through the phones (I’m doing guitar and microphone), comes out of input 7 and 8 in my DAW. Which basically means, I only really have 7 outputs, not 8, because 7 & 8 are identical. Curious to know if you are aware of any solutions? And also looking forward to more RC600 related videos from you :) All the best, cheers.

Hey Great Video! I totally agree with your comment about showing workflows when comparing. So Kudos for doing this. As for how to match the feature between units, it looks like the RC300 (set to Free, Auto, Auto) syncs the 2nd auto to the first auto while the RC600 may need to be bumped 1 setting to the right. What I mean by this is that the RC600 may need to be set to Free, Free, Auto. Have you tried this to see if it matches up with the behavior of the RC300 @ Free, Auto, Auto?