Видео

Yes but does it keep the same concentricity with differing diameters of stock?

Merry Christmas 🎉

Good work mate. I hope to pop in and see you for a beer at some point.

I made my own gears but before I could do that I had to make an indexer. So I cobbled together the indexer, then I made my first ever single point gear cutter that was a bit of a challenge. I then cut the gears which turned out ok-ish they’re not perfect and will be a bit noisy. The cam was a bit of a pain because I don’t have a rotary table but I managed to make something that looks like a cam sorta. I really like the fact that you shared this video because I was getting a bit lost as to how to fasten my gears to the flywheel and the cam. I’m a bit of a beginner so a lot of this stuff is new to me. I figure if my Webster runs when it is completed I owe you a bit of thanks. If it doesn’t run then I’ll just have another go at it and pay more attention to the details and watch your videos again.

Gday Paul, that’s a bugger with the gears but I’m sure you’ll get it sorted, have a great Christmas mate, cheers

Nice as always. :-) You know they say “ if you don’t make a mistake you don’t learn anything. So it’s ok. 😊

Merry Christmas to you and yours 👍👍

Hope your doing ok, hate meds these goof ball Dr's give out, probably better off not taking it in first place, but you have a Merry Christmas too sir!!!!

That's a bit a s**t situation with the gears. But I'm sure you will figure something out. You always do.

Bad luck with the gears. Such is life. At least you caught it before things got worse. Been there, done that ;) Cheers Rob

Coming right along. Santa brought me a shaper for an early Christmas present. Trouble is I had to pay for it and go get it. Thanks for sharing the video.

Hi As allways nice video keep going till next video from Brian w.germany have a happy Christmas and a good new year

As per usual I'd like to welcome my new subscribers 🙏, I hope you enjoy the content on my channel, if you enjoyed this video, please smash that Like button, it helps me to get my videos viewed by others and if you haven't yet subscribed, please consider doing so. 👍

Coming along nicely! 👍👍

Yep gudgeon pin in UK. Nicely done sir 👍

Looks awesome. Nice work. ;-)

You'll always get a like from me, mate. Keep making videos! Greetings from Kentucky, USA!

RIP end mill. That's the price of admission to the machining hobbysphere. We've all done it. Regards, Preso

Gday Paul, great job so far, I know the feeling when you bust an endmill like that, done that not so long ago 😂, won’t be long and the engine will be running mate, cheers

Absolutely correct, it is a gudgeon pin in English, rather than the American wrist pin. Great work looking forward to the next instalment

I know what it is to struggle with a taper cutter lathe. My USSR lathe has the same problem.

Coming right along. Thanks for posting the video.

Wow. Looking good mister

As per usual I'd like to welcome my new subscribers 🙏, I hope you enjoy the content on my channel, if you enjoyed this video, please smash that Like button, it helps me to get my videos viewed by others and if you haven't yet subscribed, please consider doing so. 👍

Another great video The build is coming along nice.Cheers.was it 0.2 8thou taper or 0.02 just under 1 thou taper?

Very nice work. Looking good.

Looking awesome. :-)

Unusual to see you looking at a plan. Great finish with those tips

Nothing to add just boost for the old algorithm 👍👍

That's looking brilliant! Looking forward to the next episode !

Gday Paul, the fly wheel and cylinder turned out good, I found making the conrod took some nutty out but I’m sure you’ll get it spot on, great work mate, cheers

Coming right along. I can almost hear it running.

Coming along nicely, don’t worry about the piston it’s easier than it looks, just keep an eye on the O ring groove depth and width, sneak up on the final size by trial and error to get some good compression, good luck 👍

As per usual I'd like to welcome my new subscribers 🙏, I hope you enjoy the content on my channel, if you enjoyed this video, please smash that Like button, it helps me to get my videos viewed by others and if you haven't yet subscribed, please consider doing so. 👍

Always turn towards the chuck on the lathe… that’s standard practice…. Otherwise looking good.

I’m new to the world of machining and I’m truly in love with it and am amazed by what a bit of time and brainpower what can be achieved I’ve been in the market for a two stage jack and the few I’ve found are way too expensive to justify for a hobby purchase and I’m not anywhere near the level of tooling or skill level to make one myself since it seems like you can’t sell anything that that you make yourself I was wondering if you would consider gifting a project to someone if so that would be an amazing addition to anyone’s shop for sure they turned out amazing you did and great job

Hi Paul, i have exactly the same saw, i have made some similar mods to mine, i havent done the outfeed table mod, great job tho 👍

Build the webster. Your steam engine was a good series.