Видео

Thank you 🙌

Thats well good, thanks for your comment. No my steel guy just noes the limitations of holes in steels.

What jobs do you do exactly

I Mainly do civil work - upgrades to commerical and industrial units and spaces things like that. I've had a play with it and although there's is not masses in my line of works there are still sections such as slabs / demo / plant / site previsions etc which are really helpful. The fact that you can update as you go is great too and should work well for me over time. I already have spreadsheets but this should keep things tidy so I going to get. Thanks for your reply still 👍 hope work is well

No because you have to use plastic tubs, on the deck you can use a barrow and tip on the floor. Lastly it's cheaper to get a hard-core muck away than 2 skips

It's sooo bad ain't it. 😁

Depends on depth and width . And what depth of concrete pour.

Usually you have 2 with spacers when it's a cavity wall. So 1 steel per skin of wall

Too many variables to say could be 2k or could be 10k. Best thing to do is send me an email .

We cut T off the rebar brother

@@pauljamieconstruction1871 as in buy a sheet of mesh cut t sections out? Nice. Did they make you keep the board off the bottom of the trench? Never really understand that. Easier to put it to the bottom surely. Saves having to try and hold it up. I’m on a similar job where it was standard footings designed by architect then Struct engineer took a look and now it’s 2 meters with clay board because of a nearby ash tree.

We had to use 2 layers of mesh on this job, so we had some left over. clay master is 500mm off the bottom i think, thats why we cut pegs to hold it,

😂😂. No one wants to watch 9 mins of that .

@pauljamieconstruction1871 👍🤣

It's like anything i guess. Maintenance is required

100%. All you can do sometimes

2 days brother

👊🏼

Yes should form a ball in your hand when squeezed but no moisture coming out. If you have a laser set it up with a pencil mark on the height as a reference

May have been an existing double. Or if can't fix a hanger on. We run another down the side bolt them together and hanger the one. Let me no what minute you saw that

@@pauljamieconstruction1871 16:56 Paul

I no. Andy nocked the laser and cut 2 of em too short. So had to bolt another timber on 1m back 😂​@damianhall4554

It's from leader doors , online, Google magnetic latch and it will come up

You have to look for that yellow logo

It was alot more fun than the other one. 😂. Do you watch many of my you tube videos?

@ sure do, very interesting. I’m learning a lot off you 👌🏽

My pleasure my friend ​@AdamW-up4qh

Thank you brother 👊🏼

Hello, my American friend . Thank you for your comment. All houses in the uk are made from bricks and blocks. Normal for us 😂 hit me up if you need advice

Hi thanks for the comment . Foreman is priced at 200-250 per day it would be unfair to charge that everyday if you are a working foreman. This covers the calls, meetings, managing , pi king materials, basically all the extra hours spent running the project. If you are running the project all day every day then charge it accordingly.

Thankyou brother 🙏

It shows the RSJ (lintel) being supported by 2 acro props. Then we built a pier underneath with engineering bricks and a steel plate to bridge the cavity

morning Tom , thank you for taking the time to comment, its great getting recognition to keep me focussed. Stay tuned for next week we have another structural job.

Thank you. Its difficult to say without seeing it. If you want it sunk in the ceiling needles are required through the bedroom above , heating pipes need cutting and re connecting through the rsj, majority of builders install under the joists. Check out our latest video uploaded 5 days ago it shows the whole process

@@pauljamieconstruction1871 great thank you, I'll check out the other vid as well

If you get stuck please let us no, we can come and sort it. ​@wwelty9272

My pleasure my friend . We got another knock through 4 th november .

Thank you Ben. Centreforce or shine all day long brother.

That's great to hear , thanks for taking the time to comment. We drill up into the steel plate with cobalt drill bits. Goes through steel like butter. Keep me posted on your extension

@@pauljamieconstruction1871 nice one. Unfortunately got a 305 UB to try and raise up, and that's after the engineer backed off the original 356 😂

Youll be fine. Just use same principle . We can come and do the knock through if you get stuck. ​@jarv75 ​@@jarv75

Thank you. 👊🏼

Love that comment. We have another knock through 4th novemer. Goal post and double timber being sunk in ceiling

Thanks for your feedback . If we put the post in first we wouldnt have got the top beam in ceiling void.

Thanks for your comment . The answer is absolutely yes you can. We have just done the exact thing last week. I am currently editing the video to drop tomorrow hopefully. If you would like us to do it , just us know.

That’s great to hear! Thank you for getting back to me. We’re just in the planning stages at present. I look forward to seeing your new video and will be in touch in the near future for sure. Thanks again

I look at it like this. Will you be spending time making phone calls, going out to site to meet your subbies , orga.ising materials, client meetings. Should this is all be changeable ??

😂😂

Absolutely correct. But you have to check that there is no gap above the joists even a small one, as the wall above could drop .

Thanks james. Not much different time wise really. Only cost to move services passing through, once it's sunk in the ceiling there is no boxing to do just plaster board as normal. The answer to your question maybe £500-£1000

Thanks mate. Have you got one to do?

@pauljamieconstruction1871 nothing like that

Thank you brother

@nicholasbaker4404 no I paid some one who takes it and fly tips it

Sorry for delay I was looking for a medal 🏅