That's why I allways cut the metal clamp AND also make a small cut (not too deep so the plastic fitting don't get damaged) into the rubber pipe in the same lenght the rubber hose is sitting on the plastic fitting. Never turn od bend the connected rubber hose before cutting is done and the pressure is released from the plastic fitting, those plastic shitty things are allways old and brake easily away. Sorry for your loss ;-)
It happens, David. Don't be too hard on yourself. If you really want to stay on schedule, I'd be surprised if you can't find that pump locally, somewhere.
That is a real shame and I guess a typical modern component problem, I hope the new part arrives soon as the irritation with it will just keep growing... kind regards, Richard.
Don't kick yourself too much over that broken fitting Tush. I can see that happening to anyone, no matter how much care you take. It could have been weak to begin with and better to break now vs. while in service. Motor on!
I notice one of the other BMW mechanics on RUclips who works pretty much exclusively on boxers uses rubbing alcohol for loosening and replacing hose lines. It seems to do the trick. He uses a copper paste on threads for ease of removal the next time they require attention. Especially exhaust fasteners that tend to rust up.
Hi George, yes I have been watching Chris Harris as well. I have seen him use the rubbing alcohol on things like the tubing for the throttle bodies etc to help them slide back. And yes, I am using antiseize compound when I put my fasteners back in as well. Thanks for watching and commenting.
I feel for you, been there with some cooling hoses on a BMW 328i. BMW is getting a bad reputation for using plastic that is prone to early failure or breakage.
I have been getting calls from a company to rent my 2004 BMW R1150RT out. I have not thought about it, but even at $100 a day, wear and tear on tires, brakes, oil changes, plugs, plus the liability and possible loss (or even getting sued) not sure that is worth the risk and effort. I do my own maintenance but still stuff is expensive.
I commiserate with you on snapping that fitting! Who of us has that not happened to? I'd wager even the BMW techs in their white coats have tweaked a few! Good thing the tank is carefully wrapped. It may spend a few more nights out there. PS What's a favorite summertime recipe? Care to share?
I can totally see that happening to me. I didnt like the corrugated hose seems that would add to the complexity. Did you have to trim on the corrugated side?
on the panel along with the temperature marker it has a level marker and it is working well, for this reason I ask you, what makes the tank light on the panel is the float rod, if it is because it is working well, the level marker and the light reserve tank is always on?
@@cheftush are you talking about me? Did my brother tell you about that? It was just a pocket watch. Of course it was his pocket watch, but in my defense I was only nine.
I could be a lot worse, Les could have torn it down in your shop. Had a friends 57 Chevy wagon parked in my shop yard for over 3 years. It's still not restored, but it's all in pieces.
Good Morning I'm from Brazil in Bagé-RS I have a bmw R1150RT motorcycle, year 2002 with only 13000 km, but I noticed that through the oil level display this little oil moisture, how can you solve it? if yes send me if possible a video of how to do it. wait att eng. cláudio soares
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
That's why I allways cut the metal clamp AND also make a small cut (not too deep so the plastic fitting don't get damaged) into the rubber pipe in the same lenght the rubber hose is sitting on the plastic fitting. Never turn od bend the connected rubber hose before cutting is done and the pressure is released from the plastic fitting, those plastic shitty things are allways old and brake easily away. Sorry for your loss ;-)
Blasting cabinet / stinky fuel tank hideout. What a useful item!
It happens, David. Don't be too hard on yourself. If you really want to stay on schedule, I'd be surprised if you can't find that pump locally, somewhere.
That is a real shame and I guess a typical modern component problem, I hope the new part arrives soon as the irritation with it will just keep growing... kind regards, Richard.
Those "disasters" justify planning for Extra days. Extra money and Extra patience. Don't wait till a week before the big trip!!!!!!
Don't kick yourself too much over that broken fitting Tush. I can see that happening to anyone, no matter how much care you take. It could have been weak to begin with and better to break now vs. while in service. Motor on!
I notice one of the other BMW mechanics on RUclips who works pretty much exclusively on boxers uses rubbing alcohol for loosening and replacing hose lines. It seems to do the trick. He uses a copper paste on threads for ease of removal the next time they require attention. Especially exhaust fasteners that tend to rust up.
Hi George, yes I have been watching Chris Harris as well. I have seen him use the rubbing alcohol on things like the tubing for the throttle bodies etc to help them slide back. And yes, I am using antiseize compound when I put my fasteners back in as well. Thanks for watching and commenting.
I feel for you, been there with some cooling hoses on a BMW 328i. BMW is getting a bad reputation for using plastic that is prone to early failure or breakage.
I have been getting calls from a company to rent my 2004 BMW R1150RT out. I have not thought about it, but even at $100 a day, wear and tear on tires, brakes, oil changes, plugs, plus the liability and possible loss (or even getting sued) not sure that is worth the risk and effort. I do my own maintenance but still stuff is expensive.
Gutted for you mate, but still great informative content, thanks
+1 for Bush in the background :)
I commiserate with you on snapping that fitting! Who of us has that not happened to? I'd wager even the BMW techs in their white coats have tweaked a few! Good thing the tank is carefully wrapped. It may spend a few more nights out there. PS What's a favorite summertime recipe? Care to share?
Hmmm, summertime to me means BBQ mostly...how about my famous Rib recipe?
cheftush that sounds great!
BMW: Break My Wallet
How do they run power into that area without a big bang happening !
Bummer. Oh well, just call it job security. The R11 50RT will ride again though!
Awesome vid... how many miles or kilometres on your bike?
Just under 100 000 km
Thanks for your speedy reply...I have 45,000 on my 04 RT. Keep up the good work Cheers 👌
I can totally see that happening to me. I didnt like the corrugated hose seems that would add to the complexity. Did you have to trim on the corrugated side?
I just trimmed either side of the corrugated part leaving enough of the plain area to slide over the fittings.
Plastic and fuel is an invitation to drying and brittleness.
YELLOW LIGHT ON THE FUEL TANK PANEL IS ALWAYS ON WHAT IT MAY BE, THIS IS MARKING FUEL LEVEL ON THE PANEL BUT EVEN FULL LIGHT TANK IS ALWAYS ON.
The Float Could be stuck or fouled on something inside of the tank or the float or sending unit could be faulty as well.
on the panel along with the temperature marker it has a level marker and it is working well, for this reason I ask you, what makes the tank light on the panel is the float rod, if it is because it is working well, the level marker and the light reserve tank is always on?
Aw man, that stinks. I was going to comment "that did not look like fun" before I got to the end. Then it REALLY did not look like fun.
Well that sucks! It's a shame Les wasn't there, you could have blamed it on him. Lol
Oh, I blamed him anyway 😉
@@cheftush Got to keep him in line. How is his project coming along?
Dennis Branam you know those kids that take things apart and never get them put back together again....? 😉
@@cheftush are you talking about me? Did my brother tell you about that? It was just a pocket watch. Of course it was his pocket watch, but in my defense I was only nine.
I could be a lot worse, Les could have torn it down in your shop. Had a friends 57 Chevy wagon parked in my shop yard for over 3 years. It's still not restored, but it's all in pieces.
Good Morning
I'm from Brazil in Bagé-RS
I have a bmw R1150RT motorcycle, year 2002 with only 13000 km, but I noticed that through the oil level display this little oil moisture, how can you solve it? if yes send me if possible a video of how to do it.
wait
att eng. cláudio soares
This may be a first, Tush with dirty hands.
It was driving me crazy 😉
Shit happens....
Benzin Pompasını 3.5 Bar Otomobil den Montaj Yaptım
Benzin Filitresini Dışarı Aldım .