HP Envy 17-CH0500SA - No power board repair, One IC and 3 Mosfets has been burned during this video
HTML-код
- Опубликовано: 5 сен 2024
- US Ebay store: www.ebay.com/u...
UK Ebay store: www.ebay.co.uk...
WebSite: sorinelectroni...
Patreon support: / electronicsrepairschool
RUclips Members: / @electronicsrepairschool
Forum: forum.sorinele...
Discord: www.sorinelect...
My tools: www.amazon.co....
PayPal me: www.paypal.com...
21:40 anyone saw the smoke come out when the probe touched the 5volt vdd pin with the 19v cap then after there was a reading 2.7 v?
21:42 exactly
@@Alchemist19 actually this video was very teaching.. a wrong move can cause a lot
And at 22.23 you can see the flux bubbling under the MOSFETs.
woot lol
Yip
The same smile when I successfully soldered EC chip. Fixing devices is lovely
I think one mosfets was shorted and the chip sense short and not drive power . The rest is story . Always check mosfets , voltage drop on gates etc. I love sorin work
21:43 puff of smoke...Great Video...
Yeah! Seen it too!
Hello Sorin When the batery is discharged to 0% laptop is not powerig on on Intelsill 98xx.
This is normall., I fix this model few times.
I charging the baterry on power supply and laptop always is work .
I not removing any components 😊
Yes .battry is dead.only charger
Sorin The wizard of laptops gets there in the end 👏 Merry Christmas to you and your family 👍
I like your style...i'm laughing one hour...when i hear you say i'm getting old..but when it's working..you say "it's working!!!"...when not working...you say "i'm getting old"!!!....you are funny...
Watch your videos every day! Amazing knowledge and patience. Thank you for your videos!
Awesome persistence in fixing this fault. And all without schematics. Unbelievable.
That was funny he was cussing out the chip at 6.00 I love it.
damn what a crazy job ! Nice job Sorin,
32:10 "Pressing random buttons here" - as you should... 😂
It would be awesome if Sorin could make another video to reflect on this error that burned the chip and to analyze what and how it went wrong.
silicon fails in mysterious ways 😂
Dear Sorin, can you please do a video about the types of mosfet,how to identify them and how they work, just like the capacitor one you did? Please
made mistake then sorin goes beast mode, fixed, I cant believe 😂
one of you best videos
Nice! But probably the MOSFETs were faulty from the beginning and the chip was OK all the time. However I like the procedure to revive the battery with the NLBA. Marfa!
Oh Sorin! We follow you all the way to the edge of the slough of despond, and, just as we think we are going to fall in with you, a miracle occurs and you make us all dance with delight and joy at your refulgent fecundity! Bravo!
S is for Sorin…
S is for Smooth 👍
Nice work Sorin.. this one was a challange...
Great video to every person for repair man.
Same Batt as yesterday. You're not getting old - you are! 😆
Magic smoke at 21.43 above resistor behind lead.
nice job , i always like following the suspence to repair such problems on the motherboard . Great video
i cant believe it worked i like that joy
The best of the best.... Nobody can trick Mr. Sorin.....
One of those days :) Excellent Vid!
That's one crazy and more than likely an annoyance to fix for you Sorin, a double fix with the battery as well. I always look forward to seeing a new fix video. All the best for Christmas and the New Year.
Hey Sorin, if you get back to a job after ordering parts and forgot the machine's behaviour, check the vid you made earlier. Thanks for sharing, I still love it.
Haha, you started cussing in Romanian?
Thank you for another video full of valuable information. This one was though, but you always make it. Great job! 💪
crazy job
but, luckily we have a spare! 2pieces bought!
VDDP is the internal LDO and it should always be 5V ift should not drop below 2.7v and chip was shorted because on pin 16 and 17 is VIN so if your probe touch pin 17 and 18 it will pass 19 volts to pin 18 where it suppose to have 5 only. Also check pin 13 ADPS. Which is ACPRES pin in BQ directly coming from VIN through 2 resistors as a voltage divider pin 8 is VDDP should be 5v which is drive high side and low mosfet gates.
Sorin, you're a wizard man! 😳
your videoes are worth watching for and it helps to grow the knowledge thank you soo much
29:49 no keyboard plug in :D .... 48:13 Nice job 👻. Thank you for everything you do for us. Merry Christmas and Happy New Year.
good job...
As always Sorin fantastic video.
Man i think i can solve my problem thx sorin. i learn so much man❤
legend
Sorin is the best. But it is kind of nice to see that it is not just me that goes through many mistakes. I mean 25:26 LOL , I feel like that all the time.
Sorin the chip originally was 💀 dead? I am confused i see the movie 🎥 but you burned the chip or did you only burned the mosfets because the third one was burnt from the beginning…. The smile you have when there is a picture that makes my day . We fixt it in 😊
I suppose sometimes experience can get in the way of logical fault finding. Taking short cuts sometimes makes things take longer. MAYBE (not definitely) the fault was that third FET was shorted gate to source all along?
21:40 - moment when white smoke was released!
Sorin happy like a child when picture comes on the screen....very nice, good job . That NLBA device is overpriced, and with the subscription for the software its like you don't own it, just like apple products.
UNPLUGGED KEYBOARD, SORIN!!!!
So you see you fixed it and it means you are NOT OLD yet !:))
😂😂 I think that the issue at the beginning was the mosfets
great job Merry Xmas
I saw smoke 21:42 near the capacitor.
The battery analyzer always showing 17 cycle can it be wrong ,because in last 3 videos always showing 17 cycle exactly.
the problem was the last mosfet ;) that was primordial issue :d
Good job mate 👍
I love Sorin's work in bringing good experiences. May God bless you on Christmas and New Year.🙏🙏🙏
mendiarapi, yes, i saw, basically 19v goes to pin 18!
Excellent !!!
You're gonna need some fish with all those chips you keep ordering. Get some salt 'n' vinegar while you're at it :)
sorin, before 2022 ends, you promise..
that you'll be more professional in troubleshooting..
but this is more fun.. hahahaha.. "i kant beliv!"
I was waiting for you to make the "Simon Says" joke and you didnt disappoint!
So what was the initial fault? Faulty mosfets around the intersil ISL95338 chip? or ISL plus mosfets...
Probably the mosfet at the end with the gate short was the only problem. But the gate short could have damaged the ISL as well. We will never know for sure 😅
nice repair
I think that the issue at the beginning was the last mosfet you replaced
Sorin >> is Alien Man. laptop is Alien TechnoloGy 👽👽👽👽👽❤❤❤❤❤
Tough couple of days involving AC chips for Sorin.
Very good 👍
Sorin can never believe.. 😆❤
I was just waiting for you to say Simon says...
Amazing as always!
14:43 as my vision there was a solder bridge under the chip.
Niechcący zrobiłeś zwarcie 19v do vdd. Aż rezystor pościł dym.
No, you are not getting old, the devices are more complicated
Hello Sorin, thanks your for educational videos. Would you be so kind to publish somewhere information about pinout of batteries you have to deal with like in this video (battery model, +/- pins, Clock/Data pins) for a reference to be used your viewers.
It can be a simple HTML table (Battery model, Positive, Negative, Clock, Data columns or may be a database LiteSQL/MySQL/MariaDB as backend).
Thank you again for your work
we have picture thats crazy we fixed i cant believe hahaha😁😁😁😁😁
Nlb is great but price is crazy, eho would pay these huge monthly subscription payments
How do you keep track of devices service informations like owner, problem, stuff like that
This was already a hard job😂😂😂😂 love you Sorin❤
Hit the like button !!!!
Another shorted capacitor, but this time Gate-Source capacitor. 🙂
I have a Hp envy 17-ch0xxx laptop. I replaced SSD and after that when I turned on the laptop the power was on put no display, So I removed battery and charger and waited for 5 min and then plugged in charger only but this time no power light and not powering…. My laptop is not powering up again. Mr. technician can you help please.
I think your mind was confused for some reason from the beginning this time (Your wife didn't feed you well). The problem was the third MOSFET from the beginning, and I think the original IC was good
amazing
What was that magic smoke at 21:42 ?
Smoking flux from that resistor. As Sorin mentioned, he shorted the 19v rail to that 5v pin.
If you spot on, smoke came from PD4401 diode. You can clearly see the bottom of that diode roasting while smoke comes from the gap between PCB and diode. Maybe it became instantly shorted (or opened) but its function is not noticeable until the laptop starts to work in normal condition.
AT 25:55 I was tapping on the screen and yelling that the keyboard was unplugged, but you didn't hear me 🤓
when Sorin said " Simon said" I remembered Die Hard with Vengence because all the Riddles in the Movie starts with Simon said.🥸
Hello🤝 good job 👍👍👍👍👏👏👏👏👋👋👋👋👋👋
I hate how complicated these batteries are now days
Where can find laptop shemathic
Anyone knows?
Simon says touch your nose.
hELLO sorin can you give me the ref of the machine to unlock the battery?
👍👍👌👌
👌👌👍👍
You are still using the WRONG DATASHEET, as in the last video of that kind. It's for the ISL95338, not the 9538... Let's see if you read the comments this time or if you'll make that mistake again.
those DY laptops are low quality :D
You still play apex legends?
with age comes experience ,I think you are out of mood or just bored .
Thats so funny to see...its the chip....ordering, waiting - no, its not....always the same. its boring to watch
I have a Hp envy 17-ch0xxx laptop. I replaced SSD and after that when I turned on the laptop the power was on put no display, So I removed battery and charger and waited for 5 min and then plugged in charger only but this time no power light and not powering…. My laptop is not powering up again. Mr. technician can you help please.
I have a Hp envy 17-ch0xxx laptop. I replaced SSD and after that when I turned on the laptop the power was on put no display, So I removed battery and charger and waited for 5 min and then plugged in charger only but this time no power light and not powering…. My laptop is not powering up again. Mr. technician can you help please.