Things I used: Gorilla Glue: amzn.to/31nW6oi BUT USE THIS INSTEAD, Barge Cement: amzn.to/2OUZioH 3m Painters Tape: amzn.to/2qc5GxB Vans Authentics: amzn.to/2qc5WN5 Camera: amzn.to/2nSiBnN Thanks for watching! I hope this helps.
Lol...the main point in mentioning that was because the sole separation, which is a common trait with beat pairs, started to happen way earlier than they should be. I never claimed mine were actually beat. Have a good day folks!
When I saw the thumbnail I legit thought you were going to keep the tape on and just paint over it 😂. I will follow my fellow commenter’s advice and use a different type of glue, but nevertheless this was really helpful.
Without a doubt i would recommend barge cement for a long term solution but this was made with the intentions of using things around the house. Dont goof up like me and remember to take the tape off before it dries. Good luck!
Good job, unfortunately in a couple of weeks the super glue will break the shoe fabric in several cracks, first of all use industrial glue for canvas shoes with rubber so the shoe will last a little longer with flexibility.
the most durable technique is going to a cheap shoemaker and asking if he can double stitch that all around like 2 line of stitching amd here you go a vans shoe that can old 5years or even more
Flimsy as fuck, I got the all black high tops and the toe of my shoe looks like a flat tire, havent worn much only 2 months old, pretty much just for skating. I got some older chuck taylors that have held up much better.
Thanks bro. My brother gave me a old pair of vans beacse he didnt want them i couldn't were them in that condition but now that theres a way to fix this problem i will have vans that i can rock a school whooohooo
Try a much stronger glue if possible! That way itll last much longer. This was meant to be a temporary solution but with the right glue it could hold a good while.
I've using this method in the past on my chucks they hold up good but after long time what happened is the canvas upper got ripped because the part with super glue became hard and now I'm using barge cement glue or shoegoo or kind of glue similar to that.
For those saying cup soles don't have this issue.. I assure you they do after some time. I'm fixing my kyle walker pros with this method, only with contact cement
this video is really helpful tho. do you mind to share how you clean (and the cleaner) your vans especially the midsole? because mine will be beaten and dirt af till the sole separate like in your vid
Gorilla glue does not flex at all. Soon as you take a step does it not come loose? Seems like you would recover a rubber/ flexible type glue like shoe goo
My converses separated right on that spot lol. Why I’m here and hell I got to replace an eyelet as well,, but like your shoe here. Mine has life left and I don’t feel like spending another $70 on a pair of shoes yet
For the price i dont complain. But when i bought the weatherproof mte i didn't believe the weatherproof part so much bc when i walked in the snow for 30 minutes i felt water inside. But i expected at least for the sides to last longer, hoping for better glue. But that was the last time i bought expensive vans.
I think this glue dries the rubber a little bit and makes it less flexible, maybe there's a better glue for this, if you've found one let me know:) So far I am using the same CA type glue for the same fixes but I have this concern!
so I have a pair of suede high top vans, would this work? the separation is a bit more severe... idk I just love them and don't want to have to throw them out
I've worn Vans since the 80's and finally got tired of this separation problem. Happened on every pair I owned. Wear Sperry boat sneakers which are built way better and I don't look like Bart Simpson anymore.
If they make a solution for this problem, people will need longer time to buy vans again. They keep their product like this to make people buy vans again in shorter time
@@priamasak6104 That's the exact reason why I'm considering other type of shoes now. Got my vans sides stitched up when it started to tear. But it looks a little funny with the stitching (although still all right).. But I'm still considering spending my money elsewhere on the next shoes.
so my jordans mars 270 i just got then today and then wore them for like few a hours. Then when i got home i noticwd the toe tip got separated a bit. what do i do or what glue should i use plz tell me. Also it was snowing, i think thats what cause it maybe
My only pair of Van’s have been a old pair of Social Distortion Sk8 Hi’s and I’ve never had this problem. Idk why RUclips’s algorithm decided I should watch this
This happened to my Nike blazers and I haven’t even had them for a year and last time my converse had this problem and I put glue and it ruined the shoe
So... idk if i did something wrong but after waiting 4 hours for the glue to dry, they bubbled up in giant yellow bubbles all over the vans. Has this happened to anybody else?
This happened to me after a year. I contacted Journeys where I purchased the shoe. They only honor the shoe after 60 days. I contacted Vans and they only guarantee after 6 months. I will not purchase another pair.
Yeah but the fix was meant to be temporary using whatever was around the house. Barge cement or e6000 is definitely the way to go if you have it around.
![[ASMR] Clean & restore "VANS" "Suede" "slip-on" -4k](http://i.ytimg.com/vi/Elb2pw75vFs/mqdefault.jpg)
Things I used:
Gorilla Glue: amzn.to/31nW6oi
BUT USE THIS INSTEAD, Barge Cement: amzn.to/2OUZioH
3m Painters Tape: amzn.to/2qc5GxB
Vans Authentics: amzn.to/2qc5WN5
Camera: amzn.to/2nSiBnN
Thanks for watching! I hope this helps.
Nice tape technique
Which one is much effective?? Gorilla glue or barge glue??
Vans need to stitch that together and maybe cut out a v on that part to add a softer material and it might even go well with their brand.
Look up vans cup sole
The thing about shoes with stitched soles is the stitching gets torn up even quicker than the rubber when skating
FullmoonEffects89 no bro he need to clean the area that took of with acetone reapply bonding cement and then clamp together and he’s done
I think any changes to the old shoe model would anger lots of people. I think they should try that but for a seperate model.
@@Kevin-hp2zx that and the soles are thicker and clunkier. No board feel
Four years after you posted this originally, you’ve helped me save several pairs of canvas shoes. Thanks so much!!
I have that same pair and just noticed the separation, I haven't even had them for that long. I'll try this, thanks!!
I have white one i juss notice my mom told me 🙁
him:the shoes are not dead yet they have some times(they seem brand new)
Skaters:Am i a joke to you
I know right? Those look fucking brand new!
I skated some shoes till half the sole tore away
Skaters always pull up with giant holes in the canvas and sometimes even the soles are ruined too
“Yeah these are fine a little beat up ya know”
"I wear this almost every day" yeah right
Lol...the main point in mentioning that was because the sole separation, which is a common trait with beat pairs, started to happen way earlier than they should be. I never claimed mine were actually beat. Have a good day folks!
When I saw the thumbnail I legit thought you were going to keep the tape on and just paint over it 😂. I will follow my fellow commenter’s advice and use a different type of glue, but nevertheless this was really helpful.
Without a doubt i would recommend barge cement for a long term solution but this was made with the intentions of using things around the house. Dont goof up like me and remember to take the tape off before it dries. Good luck!
Good job, unfortunately in a couple of weeks the super glue will break the shoe fabric in several cracks, first of all use industrial glue for canvas shoes with rubber so the shoe will last a little longer with flexibility.
the most durable technique is going to a cheap shoemaker and asking if he can double stitch that all around like 2 line of stitching amd here you go a vans shoe that can old 5years or even more
0:22
you: its inevitable
me: i'm iron man
I am IronVans....
@@eatmytimeinternet8423 ironvans: *snap*
every single vans in the world: *sole seperation*
I love this meme 3000
Tip: If you bought a new vans, go to a shoe repair for stitching the sides to prevent sole separation.
Nice idea, I just got my vans, where should I stitch it? Top,mid or bottom?
Can you give more details about this
This happened to me so I contacted Van's and they replaced my shoes for free.
This needs more likes so people know of this.
The fuck
I thought these were skate shoes not literal waffels on my feet
Flimsy as fuck, I got the all black high tops and the toe of my shoe looks like a flat tire, havent worn much only 2 months old, pretty much just for skating. I got some older chuck taylors that have held up much better.
@Owen Mcilvain yes, you have to send the shoes back. Once you send it back they will send you a new pair.
One of my favourite shoes a vans flames is doing this exact thing right now!!!! Wish me luck buddy👍🏾
howd it go?
kevin. Well i just tried it and imma let it dry for a day. Let the glue and the shoe get to know each other.
Khidnin any updates
Thanks bro. My brother gave me a old pair of vans beacse he didnt want them i couldn't were them in that condition but now that theres a way to fix this problem i will have vans that i can rock a school whooohooo
Try a much stronger glue if possible! That way itll last much longer. This was meant to be a temporary solution but with the right glue it could hold a good while.
That happened to my vans but around all the front part
the method should work for that area too!
I've using this method in the past on my chucks they hold up good but after long time what happened is the canvas upper got ripped because the part with super glue became hard and now I'm using barge cement glue or shoegoo or kind of glue similar to that.
Barge cement is the best.
@@stoneyjosephine super glue
I also tried using school glue and it actually worked but it’s on the mild side btw
Went and did this to my pair of chucks right away 😀 thanks for the vid 😍
Glad to help! Use barge cement if it comes apart again
Loctite superglue works too.
Even better if you can clamp the area, leave it to set o/n.
Ill probably try this next thanks!
I put mine in the washing machine... WORST MISTAKE OF MY LIFE.
what happened
You wash them with towels, put some on the bottom and put the shoes in the middle, cleans them safely
Just did this lol, Shits are pretty much ruined :/
I saw a mexican brand sew the sole to the shoe, i thought it was smart and since they make their shoes out of leather it looks cool
Crazy how simple it is but I never knew about this
glad to help. I'd recommend a stronger glue but this was all i had at the time.
Good job. How long does this hold until you need to repair them again?
This is ridiculous I didn’t even wear my platform vans that much and I have complete sole separation on one shoe. 🤦🏾♀️
This happened to me too!!
This actually helped a lot o my right shoe the rip in the sole that was 1.5 inches long.
super glue dries really hard and brittle. when it cracks the canvas cracks as well.
Samriddha Tuladhar so need to use what type of glue?
@@jingyang6248 synthetic rubber based glues.
Jing Yang contact cement.
For those saying cup soles don't have this issue.. I assure you they do after some time. I'm fixing my kyle walker pros with this method, only with contact cement
this video is really helpful tho.
do you mind to share how you clean (and the cleaner) your vans especially the midsole?
because mine will be beaten and dirt af till the sole separate like in your vid
Yeah Ill make a video on it soon
Use a magic eraser/sponge abd some suds on the sole to get it nice and white again ;)
This video was very helpful even though i didnt even do the masking tape and its super easy
this is great help esp. now that im about to buy the same model. thanks!
Gorilla glue does not flex at all. Soon as you take a step does it not come loose? Seems like you would recover a rubber/ flexible type glue like shoe goo
My converses separated right on that spot lol. Why I’m here and hell I got to replace an eyelet as well,, but like your shoe here. Mine has life left and I don’t feel like spending another $70 on a pair of shoes yet
Glad I could help. Use barge cement instead of super glue!
@@im_notta_youtuber Thanks and I get that instead.
kind of offtopic, but could you tell me what you shot this video with? the footage looks insanely good and professional, well done!
Thanks! It was filmed with a sony a6500
Can I use shoo glue or E6000 instead of barge cement? Or which is effective BTW?
Very helpful video!
Man my vans are the only shoes I have and wear 😂
For the price i dont complain. But when i bought the weatherproof mte i didn't believe the weatherproof part so much bc when i walked in the snow for 30 minutes i felt water inside. But i expected at least for the sides to last longer, hoping for better glue. But that was the last time i bought expensive vans.
Looking at buying the MTE now. Did you still have separation on the rubber/sides like typical? Overall review of them?
I think this glue dries the rubber a little bit and makes it less flexible, maybe there's a better glue for this, if you've found one let me know:) So far I am using the same CA type glue for the same fixes but I have this concern!
try barge cement instead! I've had a better experience with this glue amzn.to/2OUZioH
Lmk when you're done with any converse. I'd love to have them
Yeyy, this is really helpful. Thanksss broo 😊
glad it helped!
This is the reason why i switched to converse 70s
so I have a pair of suede high top vans, would this work? the separation is a bit more severe... idk I just love them and don't want to have to throw them out
THANK YOU
Do a video on how you lace your authentics
I think it gives more attitude to the shoe when the shoe has some damage especially vans,converse shoes.
Dude, it's a shoe not a dude.
For functionality along with longevity
It hurts
I've been holding it for 10 days now.
Just saying... this DOES NOT work if you skate the shoes after! Shoe goo does work tho so use that instead. 👍
time to fix literally all my vans 😅
Yes bro thank you
Like your camera settings. What camera di yiu use and is it in flat or log mode?
thereleaseph thanks man. This was filmed on a Sony a6500 with cine4 settings.
@@im_notta_youtuber super love the setting!
Awesome idea! TFS I'll be trying this too!
"its not dead yet" ...youve bearly worn them in
Appreciate this video
No prob! Use barge cement if you want a longer lasting solution.
I've worn Vans since the 80's and finally got tired of this separation problem. Happened on every pair I owned. Wear Sperry boat sneakers which are built way better and I don't look like Bart Simpson anymore.
Can you show me how you get them poxy creases out of the front of the vans that be amazing cause I can't iron them lol
what are poxy creases?
great tip
Bro help, i think in our country doesnt have gorilla super glue gel. Is loctite good for this shoe or do u have any suggestions please reply 😢
Khryss fb yes it should work. Loctite also makes a glue for specifically for shoes too.
@@jmanitowabi thanks broo
Pioneer epoxy...if you happen living in the phillipines..
Barge cement. It's kinda cheap and really does its job.
Krazy Glue works
NICE!!
How did your vans hold up? especially the heel part
Does this glue hold up through a wash cycle?
probably not. I wouldnt recommend it.
All shoes being made in China have the same problem. It's their cheap adhesive that's causing this. Quantity over Quality 😫
Good video man, can I ask for the names of those songs?
Is it gorilla polyurethane glue?
Its not a good solution, this will break easily and will cause more damage.
Almost all using vans shoes having this situation, I wonder why vans doesn't give this a solution for many years now
If they make a solution for this problem, people will need longer time to buy vans again. They keep their product like this to make people buy vans again in shorter time
@@priamasak6104 That's the exact reason why I'm considering other type of shoes now. Got my vans sides stitched up when it started to tear. But it looks a little funny with the stitching (although still all right).. But I'm still considering spending my money elsewhere on the next shoes.
i recomend barge cement for vans sole sip
seven minutes to teach you how to gorilla glue a your shoe
Bro What glue do you use on your video?
@@im_notta_youtuber hmm where should we buy this glue? Is it available in any hardware?
The glue he uses is gorilla glue. You can buy that anywhere like Walmart. I'd suggest shoe goo though
what glue did use? is it available here in the philippines? i had a vans but i rarely use it since it sides are tearing off :(
The secret is to buy a waffle cup Van's like the AVE pro or Kyle Walker pros. They look like Van's but have a cup sole so no fear of separation.
will this work with a bag of cement from my local walmart? I have the kind that you can add water to and it dries
this happens to all my vans im going to try this solution from now on
dont use superglue like I did lol. Use a stronger adhesive for rubber.
@@im_notta_youtuber thanks for the heads up :D
so my jordans mars 270 i just got then today and then wore them for like few a hours. Then when i got home i noticwd the toe tip got separated a bit. what do i do or what glue should i use plz tell me. Also it was snowing, i think thats what cause it maybe
use barge cement instead of super glue
My only pair of Van’s have been a old pair of Social Distortion Sk8 Hi’s and I’ve never had this problem. Idk why RUclips’s algorithm decided I should watch this
My white checkboard pro cant relate to this video.. but my other vans do 🤣
may i ask how do you wash those black fabric/canvass shoes?
Never had that problem, wanna know why, bcs i actually skate vans instead of walking around in them and punishing my feet
my vans are hella beat and i love them. like the whole front is falling off. i gotta use like liquid nails its crazy
Then what if it happen again?glue over glued will not stickying anymore.
Happened after 1 week to my 400$ fear of god vans 😡😡😡😡
Henkka same but mine was after 2 days
You can make a return if you have the receipt I called
CHEEZE MAN the retail was 60 but the shoes are so limited that they are going for 400 so thats why returning isnt an option
tragic...which pair?
ke_vans the red low top fear of god collab
Brilliant!
It will crack
Vans Og classic
This happened to my Nike blazers and I haven’t even had them for a year and last time my converse had this problem and I put glue and it ruined the shoe
So... idk if i did something wrong but after waiting 4 hours for the glue to dry, they bubbled up in giant yellow bubbles all over the vans. Has this happened to anybody else?
This happened to me after a year. I contacted Journeys where I purchased the shoe. They only honor the shoe after 60 days. I contacted Vans and they only guarantee after 6 months. I will not purchase another pair.
I just stop wearing Vans instead started wearing Converse.
This happens too.
the chuck 70s really hold together well, but the plain chucks suck ass
@@onlinexanderw4090 vans ward and converse Fuck 70s are the best options of each brand.
Xeon Leeder The hedgehog the fuck 70s lmao
I'm watching this video to fix my leather converse
I have same problem but there is a small tear on fabric and tear is loose. How it can be repaired please
sorry I dont have a method for that just yet
Nice 🎉
Is that super glue ?
weird, have had my pair for 3 years and no tears or sole separation.
What is your vans?
Is that super glue? Super glue dries hard, not really what you want for a flex point. Try using E6000 or something like contact cement.
Yeah but the fix was meant to be temporary using whatever was around the house. Barge cement or e6000 is definitely the way to go if you have it around.
Hey where did you buy Gorilla Glue?
The store
Nice anaheim ya got there
Thanks! I need to fins another black pair soon
What tape are you using....
Super glue is brittle..try a rubberbase one.
Dude I hate how my vans are all squeaking I got 5 new pairs and they won't stop making a noise
I think gum soles wouldn’t crack.
They do
Yes they do
Hi, what brand of glue are you using?
Any type of super glue will work
🙌🏽🙌🏽🙌🏽👏🏽👏🏽👏🏽🔥🔥🔥
that happened to me.. but it’s in the front and the rubber thing is all gone :(
I want to save my leather chucks sooo bad.
The same thing happen with my Chuck Taylors after a couple of months
The reason I'm here