The previous owner of my boat used Copper Coat and I continued....so far, I am impressed. I've been in the water (Florida) for 6 months and when the diver came to clean the bottom, the hull was clean....no growth whatsoever!! When people have issues with Copper Coat not working, I suspect they didn't apply/sand it properly. I spent a week with 320 grit sanding (burnishing to expose the copper)...it was painful for sure but the results speak for themselves.
Hey mate.... this is true! Bad application make the difference.. I got some friends has make disaster with incorrect application of coppercoat... some friends Say in bad word.. always read the fu..k..i..g instructions 😂
Great job! We did it five years ago and I love my Coppercoat more and more every day. Especially when all the other boat owners are freezing their bums off every Spring in Copenhagen and I’m warm and cosy at home!! You’re going to love it for sure 🤗
Great job Gabriel - brave man tackling that single handed. It is a long job that needs a continuous effort. Another pair of hands would have helped enormously - you should have given me a call.😉😀👍
Super nice Gabriel, and don´t worry about the runners. You will have the exquisite pleasure to sand them down, when you activate the Coppercoat! Yay - more sanding hehe
Hi Gabrielle. I have just discovered your youtube site and I LOVE it! I am in the process of buying a HR41 aged 1979 so lots of work for me too! When will you be doing your next video? Robin
Molto interessante. Io ho cc ma devo rifare la chiglia e alcuni ritocchi. Volvevo chiederle se sulla base della sua esperienza per i ritocchi devo togliere tutta l’ossidazione (il verde) e se la chiglia va scartavetrata prima di rimettere la barca in acqua. La ringrazio Alfonso
Salve per i ritorco li può fare irruvidendo la superficie con carta vetrata 80 e poi si ritocca con del nuovo coppercoat grattando con la carta 80 il verde va via
Solitamente quando si stende la AV significa che il traguardo e' vicino... oltre al Rigging che altri lavori ti mancano? E.D.L.? (Estabilished Day for Lunch), can't wait for the last "JOB DONE !"
@@sea4see I mentoned it because anybody else that does it for themselves would need to know this.So many have made the mistake not sanding.And also when haul out, sand each time.This is why the more coats you put on the better.
Great this is true!!! at the end I got 7/8 layer.. the problem is that nobody or very few do for them self...and rely to the marina or shipyard.. not my case😉
@@sea4see I enjoy watching.Everything you, and they do .i can do .I am a carpenter and joiner and a lot more.I am old school.so from the days when there was none of those digital machines and composites..I have worked on 38ft to luxury liners.But hated being in the same working place.So worked a lot on shop fitting.I think you are doing a great job on that boat.
Also wenn ich das jetzt nach ausführlicher Recherche richtig sehe ist Coppercoat nichts anderes als Epoxidharz und Härter mit entsprechender Härtungs- bzw. Verarbeitungsdauer und Kupferpulver, sowie etwas Isopropanol...🤔😉
The previous owner of my boat used Copper Coat and I continued....so far, I am impressed. I've been in the water (Florida) for 6 months and when the diver came to clean the bottom, the hull was clean....no growth whatsoever!! When people have issues with Copper Coat not working, I suspect they didn't apply/sand it properly. I spent a week with 320 grit sanding (burnishing to expose the copper)...it was painful for sure but the results speak for themselves.
Hey mate.... this is true! Bad application make the difference.. I got some friends has make disaster with incorrect application of coppercoat... some friends
Say in bad word.. always read the fu..k..i..g instructions 😂
Another video in a long process of rebuilding a modern classic. Great job !!!!!!!!!!!!!!!!!!
Thx Jim!!!
Awesome work again Gabriele! She's going to the most beautiful HR312 ever. So looking forward to see her splash into water.
Great job! We did it five years ago and I love my Coppercoat more and more every day. Especially when all the other boat owners are freezing their bums off every Spring in Copenhagen and I’m warm and cosy at home!! You’re going to love it for sure 🤗
Thx Clare!!! Nice to know!!!!👍🏻
So few rollers I thought you wouldn't have enough - nice job!
Many rollers!!!💪🏻😂😂
You are a very hard worker, Copper coat looking great.
Thx mate!!!!!
Good news, you get to relax before you have to activate it before you go into the water! Great job, thank you!
I'm definitely putting copper coat. Thanks!
Must do!!!
Great job !! Even the fish will have a look at a job 100% perfect ly done. Thank you for sharing.
Thx friend!!! Hope so!!!👍🏻👍🏻👍🏻👍🏻
Great preparation has paid off to achieve a great result!
Yes lot of preparation but worth the result!😀
Great job Gabriel - brave man tackling that single handed. It is a long job that needs a continuous effort. Another pair of hands would have helped enormously - you should have given me a call.😉😀👍
Next life will be😉
@@sea4see 😂
Now that is punishment but what a fantastic result.... and you managed to pull off a happy caio👍👍
Thx Damon!! Happy now but what a deal.....
Super nice Gabriel, and don´t worry about the runners. You will have the exquisite pleasure to sand them down, when you activate the Coppercoat! Yay - more sanding hehe
Thx! Hope so!!!!!👍🏻
@@sea4see Your videos are well made, getting better and better. You have aquired some new editing skills
I think that makes the hull look so fantastic. Great work my friend!
Thx David!!!
Your boat becomes better than new😜
Looks amazing. You work very hard and it shows how much you care. cheers.
Thx Andy!!!!
It's getting closer to the finish line !
Great job !
George need to be !!
Another nice job done. Looks great! Thank´s for sgaring.
Thx doc!
It's like the varnish, the more layers the longer it lasts! It should last about 15 years or more! Keep safe my friend!
Kind regards.
This is true!!!!like varnish!!! Hope stay for long time
@@sea4see More then 10 years!
Awesome job.
Thx mate
Hi Gabrielle.
Very nice video.
Thanks for sharing.
What is your impression of copper coat after almost one year in the water?
Regards
Coppercoat works greatttttt
Hi Gabrielle. I have just discovered your youtube site and I LOVE it! I am in the process of buying a HR41 aged 1979 so lots of work for me too! When will you be doing your next video? Robin
Thx Robin! Great to subscribe my channel! The new episode will be out today! Stay tuned!!!
great job and it really did look like a ton of work!
Really true Jon! My shoulder are ko
Great job Gabe. That is another job off the list of "things to do". I'm sure you feel good about that. Regards, Solomon
Ciao Solomon! Yes true I catch the last days with warm weather to do this job now I’m relaxing engine is the last thing after that sailing soon
Amazing. STB. Simply The Best.
Thx Bruce🖐🏻
Well done. Can I ask how long did it take for each side? I assume maybe about three hours.
Hello ! I take one day for side 6 am to 18am waiting one hour from any coats ( depend of the temperature..) quite long but easy
Looks good, getting closer to lauch, ciao . .
Yea hope so Rich!!!
Molto interessante. Io ho cc ma devo rifare la chiglia e alcuni ritocchi. Volvevo chiederle se sulla base della sua esperienza per i ritocchi devo togliere tutta l’ossidazione (il verde) e se la chiglia va scartavetrata prima di rimettere la barca in acqua. La ringrazio
Alfonso
Salve per i ritorco li può fare irruvidendo la superficie con carta vetrata 80 e poi si ritocca con del nuovo coppercoat grattando con la carta 80 il verde va via
👍!!!..very nice thank you for the video
Thx for watching!!!
i see you had your through hulls in before painting -
also - what will you do with the space under the keel?
Hey mate I will paint the bottom when in marina ! Now is physical impossible I need the trave lift...
Solitamente quando si stende la AV significa che il traguardo e' vicino...
oltre al Rigging che altri lavori ti mancano?
E.D.L.? (Estabilished Day for Lunch), can't wait for the last "JOB DONE !"
Ciao grazie!! Sto installando il motore e ora tanti particolari... spero covid permettendo il prossimo anno in acqua!!!
Beautiful, thanx for shaming
Are you not to sand the copper coat after painting.?
Off course but the the day of splashing it! You can’t sand too early!
@@sea4see I mentoned it because anybody else that does it for themselves would need to know this.So many have made the mistake not sanding.And also when haul out, sand each time.This is why the more coats you put on the better.
Great this is true!!! at the end I got 7/8 layer.. the problem is that nobody or very few do for them self...and rely to the marina or shipyard.. not my case😉
@@sea4see I enjoy watching.Everything you, and they do .i can do .I am a carpenter and joiner and a lot more.I am old school.so from the days when there was none of those digital machines and composites..I have worked on 38ft to luxury liners.But hated being in the same working place.So worked a lot on shop fitting.I think you are doing a great job on that boat.
Wow thank you very much .. said from a insider is best compliment!!’💪🏻
You need to wait one week “for your shoulders to recover!”
2 days two ibufrofen and all 👌😂
Copper coat is pretty expensive, how many years do you expect from it.
No expensive at least here.. 6 layer for sure not less 10 years!!!
I have coppercoat on my HR36. Applied in 2013. Stil doing an excellent job!
Also wenn ich das jetzt nach ausführlicher Recherche richtig sehe ist Coppercoat nichts anderes als Epoxidharz und Härter mit entsprechender Härtungs- bzw. Verarbeitungsdauer und Kupferpulver, sowie etwas Isopropanol...🤔😉
Yes off course isopropyl need to be used to clean and degrease before apply coppercoat
@@sea4see ...I saw they put some caps of Isopropanol into the resin...
@@newman5901 yes true as ask from instructions
Nice to talk to you...Greetings Dietmar