I note with my experience with similar equipment for over 40 years' professional engraving. Not been discussed here: . even with calligraphy skills, you will need to gain skill in using a spinning tip which is cutting into surfaces and will resist cutting tough surfaces including glass. . It is nothing like using a pen/inked nib or a brush, it is quite unforgiving. . Unless good competence is gained (extensive practice needed) as you touch a surface, the tip will want to run off that surface. . On glass, it is best to use scrap bottles --as during initial stages-- spending any money on bottles will be wasted as they will be messed up through exercise work. Be aware of accidents. Keep the supporting hand away from path of any possible slipping --as tip is sharp, including round diamond crusted tip.--. Check warranty limitations with any equipment and whether replacement chargeable batteries are available.
Hi there I am have difficulty getting smooth lines . They feathery and not solid & smooth. And on black or dark bottlle its also not smooth especially Tom Ford and the Pink Klin perfumes. PLEASE HELP
Yes of course! I use the Yokefellow to engrave, all of my tools are available on my Amazon storefront: www.amazon.com/shop/wandercrafter/list/H1P44XB93Q5Y
Hi! At this time, my engraving content is included in my course, The Craft Academy! it may help to use a smaller bur, use bur lube, and slow down your rpm until you get more comfortable with your engraving. All of these are in my Amazon storefront!
such a great question! You can purchase chalk or transfer paper, print it on there, then trace onto the bottle and engrave it! It's in my amazon store and I'll make a video on this :)
I don't sell these bottles, they're gifts for my coaching clients! However, if I were to put a monetary value on it, I charge a minimum of $50 per item engraved!
such a great question! You can purchase chalk or transfer paper, print it on there, then trace onto the bottle and engrave it! It's in my amazon store and I'll make a video on this :)
the only alternative I've found is using acrylic ink + nib/pen to fill in the lines. it's more time consuming, but nothing else we've found has worked.
I have it linked in my amazon storefront and even did a review of all the engraving tools that we recommend! Amazon: www.amazon.com/shop/wandercrafter/list/H1P44XB93Q5Y YT video: ruclips.net/video/8hOZen87Sc8/видео.html
![FendiDa Rappa - Clock Dat ft. Shamar Marco [Official Music Video]](http://i.ytimg.com/vi/3NBU8KHdxYY/mqdefault.jpg)
![OsamaSon - ik what you did last summer [Official Music Video]](http://i.ytimg.com/vi/4DIQDnu3mr4/mqdefault.jpg)
I just found you on tiktok, thank you for making videos. I feel like this might be my next hobby!
Yay!!! I have a course coming out soon with all the details!
Thank you for your insight. Very knowledgeable.
you're amazing Lashay!
How long does one bur last?
Awesome video! I like the way you made it into a 5-step system.
So glad you found it helpful!!
I note with my experience with similar equipment for over 40 years' professional engraving.
Not been discussed here:
. even with calligraphy skills, you will need to gain skill in using a spinning tip which is cutting into surfaces and will resist cutting tough surfaces including glass.
. It is nothing like using a pen/inked nib or a brush, it is quite unforgiving.
. Unless good competence is gained (extensive practice needed) as you touch a surface, the tip will want to run off that surface.
. On glass, it is best to use scrap bottles --as during initial stages-- spending any money on bottles will be wasted as they will be messed up through exercise work.
Be aware of accidents.
Keep the supporting hand away from path of any possible slipping --as tip is sharp, including round diamond crusted tip.--.
Check warranty limitations with any equipment and whether replacement chargeable batteries are available.
Hi there I am have difficulty getting smooth lines . They feathery and not solid & smooth. And on black or dark bottlle its also not smooth especially Tom Ford and the Pink Klin perfumes. PLEASE HELP
What is the name of the drilling machine and what is the brand
You can find all of my tools on my Amazon storefront: www.amazon.com/shop/wandercrafter/list/H1P44XB93Q5Y
Is there a way you can engrave the Opposite way especially if your engraving a wine bottle
Well explained madam! Can give details of the device used for writing letters,
Yes of course! I use the Yokefellow to engrave, all of my tools are available on my Amazon storefront: www.amazon.com/shop/wandercrafter/list/H1P44XB93Q5Y
Can you include a trouble shooting page. E.G. Why are you getting feathery line ? Solution -
Hi! At this time, my engraving content is included in my course, The Craft Academy! it may help to use a smaller bur, use bur lube, and slow down your rpm until you get more comfortable with your engraving. All of these are in my Amazon storefront!
You write beautifully - how can I achieve this if I am unable to write free-hand calligraphy ?
such a great question! You can purchase chalk or transfer paper, print it on there, then trace onto the bottle and engrave it! It's in my amazon store and I'll make a video on this :)
I amfrom the natue island of Domonica i want lrarn this art some day i will when to travel to learn it i want formal class for mow looking it
you can reach out to instagram.com/letterthisletterthat to find out when her next class is!
How much would you sell this custom engraved water bottle for at a show?
I don't sell these bottles, they're gifts for my coaching clients! However, if I were to put a monetary value on it, I charge a minimum of $50 per item engraved!
WHAT IF YOU CAN NOT DO CALLIGRAPHY AND WANT TO ENGRAVE USING A TEMPLATE?
such a great question! You can purchase chalk or transfer paper, print it on there, then trace onto the bottle and engrave it! It's in my amazon store and I'll make a video on this :)
Is there something else I could use instead of the "rub n buff" ?
the only alternative I've found is using acrylic ink + nib/pen to fill in the lines. it's more time consuming, but nothing else we've found has worked.
Where did you buy your engraver that’s an awesome video
I have it linked in my amazon storefront and even did a review of all the engraving tools that we recommend!
Amazon: www.amazon.com/shop/wandercrafter/list/H1P44XB93Q5Y
YT video: ruclips.net/video/8hOZen87Sc8/видео.html
Oh ok the only thing I saw was the nail machine so sorry again if I mistaken it for something else
Hi
Love you work
How and where I can make a order?
hi! I dont take commissions anymore, but check out www.wandercrafter.com/directory to find a calligrapher near you!
Where do you purchase the bottles?
I got these on Amazon!!
Looking for your supplies list?!
Hi Alicia! Check out my Amazon list here: Check out this page from Rosie www.amazon.com/shop/wandercrafter
New videos coming soon!!
@@wandercrafter is the pink engraver on your Amazon page the one you use?