This must be the most efficient whip pan transition I've ever seen and the video is straight to the point and easy to understand. Thank you so much for doing this!
Wow this is a really clear and fast tutorial. I appreciate that you didn't add in a ton of filler and just get to the point. (You've converted me to a subscriber)
Thanks for the tutorial! I recently switched from Final Cut to Premiere, and have been looking for a suitable transition for a long time. But it turns out you can do it yourself in a minute!
Great video thank you!! For everybody struggling with the common problem introduced when you render the video that the offset is not aligned correctly I found a solution that works for me! Make sure that your "Frame-size" is the same dimensions as your video preview width & height. (you can change this in your "sequence-settings". Also make sure that when you export the video that your output resolution is the same as the source resolution. This way the correct numbers for the offset actually works the way it is supposed to work. Hope this helps!! @SmertimbaGraphics thanks again for simplifying and explaining this transition!
I'm new to the Premiere, Can you tell me, if i created this Transition using adjustment layer, can i save it as a preset for later use, and if i apply it on an other projects, will it work exactly same as it's working now, please guide me, as First i was doing it without adjustment layer, directly on the clips and was saving it as a preset, but it was not working well on the other project
You can add this project with an adjustment layer into another project, then open the sequence with the transition, copy the adjustment layer then paste it into another timeline
Very nice turorial, quick to the point and the transition doesnt look clunky like many others. But for me it doesnt seem to really seem to work after i pre render it. Everything looks smooth in the preview before rendering but after rendering, it only offsets a little bit and then snaps into place which makes it look super wonky. I was wondering if you have encountered the same problem and/or know a solution?
@@SmertimbaGraphics I fixed it and now also know why that happened. At first I had the offset keyframed so it moved only 480 pixels. The weird thing is, in the preview it looked like that would be enough to do a full cycle. But like I said, after pre rendering it it would just offset a little bit. So i played around with the offset value and found out that it had to offset 1920 pixels to do a full cycle after pre rendering (Which in hindsight is very obvious). Before rendering its doing 3 full cycles though, which isnt really intuitive. Well, turns out I had the preview resolution set to 1/4 instead of Full, which means the values dont ranslate correctly to the preview screen, unless you set it to Full. So moral of the story: Dont trust what the preview is showing you unless you set it to full resolution lol.
@@roadtobufftoni If I could thumbs up this comment a thousand times I would! Been searching for a fix for hours and this comment is the only solution I found on the internet!
Actually, a similar effect can be achieved by VR Spherical Blur under Video Transitions, Immersive Videos. Then set the the Exposure to 0 and Point of Interest Y value to 0 (no vertical shift). You will get a fast horizontal swipe similar to the above.
OK, This is great, but after rendering, the second clip jumps in certain moment while the transitions lasts... i do not know what i am doing wrong.. :(
I've seen people comment about that, but haven't seen the issue myself. I will mention you under the comment where people found the solution though maybe that helps.
Yes, pretty much, but the sequence needs to be 1080 by 1920 beforehand, otherwise you will have black borders. Also the values of the transition will need to be different
The video on the left and right is the same and then just switches. how to i fix that? This might not be visible in yours because you have very similar clips but it does look off if the clips have a very different color setting
Sorry for the noob question, but can you tell me the difference between this and adding gaussian blur to a default push transition? I'm enjoying this method because I can apply it to an adjustment layer and use it as a preset but, I just want to make sure I'm not missing something else as I learn. Thanks!
This way you have more control over the transition, it's quicker to apply, it's a more professional approach overall. But built-in presets are fine to use, they need an overlap between videos though I believe, so not all transitions will look the same based on where video starts or ends
Please review this tutorial! This edit only works during preview. Rendering this edit always results in a split frame for some reason when using the needed aspect ratio value for a full number of cycles. Unless you're using an older version of premiere pro perhaps? Either way, I really liked your succinct style of demonstation. Too bad the edit didn't work!
I had the same problem, and I came back to this video to see if anyone else did. Following the advice of another commenter, I found that the problem was because of two things -- the offset value was slightly off, and for some reason it is also affected when previewing in lower than Full resolution. To fix it, I stopped my playhead on the freeze frame and then adjusted the offset value until it had completed another cycle. I then previewed and rendered it and so far it's working fine. Give it a try!
@@SmertimbaGraphics This was a good tutorial. Thank you for posting it! Might be a good idea to add the advice given by the other commenter 3 months ago into your description as this seems to be a common issue
@@bennetthobbs5989 also saw that comment and checked beforehand. It's not a preview issue. I was already using full resolution preview. Also, my offset value wasn't off, it actually seems like that's what makes it glitch: as soon as i'd change away from the correct value, the frame goes back to its reasonable placement in the cycle. But as soon as i scroll it back to any correct value for a full number of cycles, it jumps to split screen as soon as i land on the exact value. Before rendering, both typing in the correct value and scrolling till you get there will work fine with the frame. After rendering, it's like trying to attach 2 magnets from the wrong ends 👎
*Workaround for anybody facing the same issue:* If you drag your offset value far enough away from the correct value (for me it was about -/+50) and then make the adjustment layer as short as possible on the timeline, then the frame being off is not noticeable as much. It's not ideal but i obsessed over this and found no real explanation or solution to this rendering glitch
Brother! No time wasted, no ego, no bs! Such an impressive tutorial. Thanks!
Thank you too❤
No intro, no BS 10 minute explanation, just straight to the point. I love it
I miss an intro
as someone looks up premier tutorials constantly this is genuinely one of the best most articulate and well paced I've ever watch. THANK YOU
Appreciate that! Glad you found it helpful
No Intro, unnecessary talk, music etc. Straight up to the point quick and easy. Thank you!
It's a pleasure, thank you❤
Shut up
This must be the most efficient whip pan transition I've ever seen and the video is straight to the point and easy to understand. Thank you so much for doing this!
Thank you too♥️
This was quick and easy! I got it on my first attempt and it mad my video so much more interesting.
Wow this is a really clear and fast tutorial. I appreciate that you didn't add in a ton of filler and just get to the point. (You've converted me to a subscriber)
I love straight to the point tutorials myself😁Thank you for the sub💯
Dude. Thank you! You cut out all the fluff and get straight down to business. So many YT creators could learn from you.
Appreciate the feedback😁✌️
I can say the same. Its easy to understand and use these effects after I watched your videos. Thanks for it and thanks for your time to do it!
I appreciate the positive feedback😊 glad you enjoyed thank you❤️
Your tutorials are always easy and to the point without wasting time!!!!!!
Thanks bro! Amazing video, very clear and straight to the point.
You're welcome! Enjoy!✌️
Fantastic tutorial. No intro, no fucking about, just straight in, and it looks great. Props
You are doing very good job.
Its easy to understand and take less time.
Create more tutorials about transitions
thanks!
Glad you enjoy, will do for sure😊
Fantastic tutorial no messing about. Exactly what i wanted, thank you so much! I will be watching a lot more of your videos!
Super glad to hear, thanks for watching❤️❤️
EXCELLENT video. Straight to the point. This is a great transition tool.
I appreciate it, glad you liked it!
thanks for the help!
brilliant, thanks
Great very useful transition, definitely going to try in my next video 📷 Greetings from a Swede in Beijing 🌆🏯😊
Thank you❤
You're welcome! 💖
Fast, easy, cristal clear. Awesome work! Thank you so much :).
No problem 😊
Extremely useful, thank you !
You're welcome!
Thanks for the tutorial!
I recently switched from Final Cut to Premiere, and have been looking for a suitable transition for a long time. But it turns out you can do it yourself in a minute!
Great to hear, welcome to premiere pro, how are you liking it?
Thank you so much, glad you didn't talk bs like any other guys out there. gj
Glad I could help😁
best premiere tutorial ever, thanks a lot!
I appreciate it❤️
Go straigth to the point, easy to understand, tysm !
Welcome❤
This was smooth. Thank you for the tutorial.
Glad it was helpful!
Thank you for this tutorial and including the project file!
You're very welcome!
This is great!!!!
Ty
Good, thanks
thank you! working in vertical videos too
You're welcome!
Great video thank you!! For everybody struggling with the common problem introduced when you render the video that the offset is not aligned correctly I found a solution that works for me! Make sure that your "Frame-size" is the same dimensions as your video preview width & height. (you can change this in your "sequence-settings". Also make sure that when you export the video that your output resolution is the same as the source resolution. This way the correct numbers for the offset actually works the way it is supposed to work. Hope this helps!! @SmertimbaGraphics thanks again for simplifying and explaining this transition!
It's a pleasure ♥️ thank you for the feedback, it is much appreciated 💯
Omg you saved me. I was going to remove the effect from my assignment. Thanks
yo yo yo yo ! THis amazing!!! thank you thank you thank you bro!!!
Enjoy✌️😁
@SmertimbaGraphics Thanks!!!
Nice effect and amazing explanation ♥
Thank you♥️
That was amazing. Thank you so much :))
No problem 😊
I'm new to the Premiere, Can you tell me, if i created this Transition using adjustment layer, can i save it as a preset for later use, and if i apply it on an other projects, will it work exactly same as it's working now, please guide me, as First i was doing it without adjustment layer, directly on the clips and was saving it as a preset, but it was not working well on the other project
You can add this project with an adjustment layer into another project, then open the sequence with the transition, copy the adjustment layer then paste it into another timeline
this is better than a simple push transition
This guy gets it.
Great video! Very well explained and the transition goes straight to the point. Thanks!
Thank you
Great video thank you, this will save me a lot of time!
Glad to hear it!
Thank you! You´re so good explaining
Glad you think so♥️
King!!!
Hi, thank you so much very much for your teaching the transition. Liked subbed ❤
Thanks for the sub♥️
Big up Brother cause your technic its so nice🤩🤩🤩
Thank you 🙌
Really helpful! Thanks.
You're welcome!
Brilliant
Thanks😁
holy smokes how do you guys figure this stuff out id never in a think of that to make a transition, so sick actually!
It's actually very simple once you get familiar with how effects work 😁
Good stuff. Thanks!
Thank you so much! I was looking for this transition, and is so simple to do! Thanks so much, this save me!
Happy to help!
BET!!! Straight to the point let me go ahead and subscribe baby!!
Thank you😁✌️
Thank you!
Welcome!
I used for a vertical whip on tiktok and it looks great. Thank you
You’re welcome 😊
Awesome man thanks a mil!! Top Baller right here
Any time!🔥
Very nice turorial, quick to the point and the transition doesnt look clunky like many others. But for me it doesnt seem to really seem to work after i pre render it. Everything looks smooth in the preview before rendering but after rendering, it only offsets a little bit and then snaps into place which makes it look super wonky. I was wondering if you have encountered the same problem and/or know a solution?
keep doing what you do btw!
Thank you ❤
I don't think I have, it rendered fine for me when I edited the preview clips, what settings do you use for export? What's the bitrate?
@@SmertimbaGraphics I fixed it and now also know why that happened. At first I had the offset keyframed so it moved only 480 pixels. The weird thing is, in the preview it looked like that would be enough to do a full cycle. But like I said, after pre rendering it it would just offset a little bit. So i played around with the offset value and found out that it had to offset 1920 pixels to do a full cycle after pre rendering (Which in hindsight is very obvious). Before rendering its doing 3 full cycles though, which isnt really intuitive.
Well, turns out I had the preview resolution set to 1/4 instead of Full, which means the values dont ranslate correctly to the preview screen, unless you set it to Full. So moral of the story: Dont trust what the preview is showing you unless you set it to full resolution lol.
Truee, previews are weird, especially in premiere😁
Glad you were able to figure it out ❤️
@@roadtobufftoni If I could thumbs up this comment a thousand times I would! Been searching for a fix for hours and this comment is the only solution I found on the internet!
exactly as I expected
thx
thx bwo good video
Any time✌️
Thanks, Simple Tutor
Welcome
Thank you so much!
You're welcome!
Great tutorial will use in my videos
Enjoy♥️
merci from france
thanks
You're welcome!
its 22:26p.m.
you saved my life
I got you dw😂
amazing video, you have my subscribe and like
Thanks for the sub!
very nice. Thanks
Thank you too!
thank you
Welcome!
thanks you so much
Happy to help
Actually, a similar effect can be achieved by VR Spherical Blur under Video Transitions, Immersive Videos. Then set the the Exposure to 0 and Point of Interest Y value to 0 (no vertical shift). You will get a fast horizontal swipe similar to the above.
thanks !!!
Welcome!
can't belive i didn't know how make such simple effect 🥲 Thanks, it was very direct and simple
My pleasure❤
amazing tutorial thanks
You're welcome!
Is there a way we can save this?? And just keep using it in different videos?
You can copy paste the adjustment layer to different projects and quickly re use it that way
does the adjustment layer need to be above the 2 clips?
Yes, an adjustment layer affects every layer that's under it, that's how the transition is made
Looks simple
Legend! ty
It's a pleasure
Amazing tutorial
Thank you
10/10
OK, This is great, but after rendering, the second clip jumps in certain moment while the transitions lasts... i do not know what i am doing wrong.. :(
I've seen people comment about that, but haven't seen the issue myself. I will mention you under the comment where people found the solution though maybe that helps.
Same, sometimes it works sometimes it doesn’t.
👍👍👍
if i want to export my video to 60 fps, do i set that 60 fps for highest quality and do 1080 by 1920? thank you
Yes, pretty much, but the sequence needs to be 1080 by 1920 beforehand, otherwise you will have black borders. Also the values of the transition will need to be different
how about show what it looks like before we go to work?
The video on the left and right is the same and then just switches. how to i fix that? This might not be visible in yours because you have very similar clips but it does look off if the clips have a very different color setting
Either add more blur to the middle keyframe or make the movement faster by dragging the blue keyframe handles inward
Sorry for the noob question, but can you tell me the difference between this and adding gaussian blur to a default push transition? I'm enjoying this method because I can apply it to an adjustment layer and use it as a preset but, I just want to make sure I'm not missing something else as I learn. Thanks!
This way you have more control over the transition, it's quicker to apply, it's a more professional approach overall. But built-in presets are fine to use, they need an overlap between videos though I believe, so not all transitions will look the same based on where video starts or ends
how to do it vertically?
Animate Y value instead of X
Please review this tutorial!
This edit only works during preview. Rendering this edit always results in a split frame for some reason when using the needed aspect ratio value for a full number of cycles.
Unless you're using an older version of premiere pro perhaps? Either way, I really liked your succinct style of demonstation. Too bad the edit didn't work!
I have just confirmed that everything works fine after rendered. I am using latest premiere 2023
I had the same problem, and I came back to this video to see if anyone else did. Following the advice of another commenter, I found that the problem was because of two things -- the offset value was slightly off, and for some reason it is also affected when previewing in lower than Full resolution.
To fix it, I stopped my playhead on the freeze frame and then adjusted the offset value until it had completed another cycle. I then previewed and rendered it and so far it's working fine. Give it a try!
@@SmertimbaGraphics This was a good tutorial. Thank you for posting it! Might be a good idea to add the advice given by the other commenter 3 months ago into your description as this seems to be a common issue
@@bennetthobbs5989 also saw that comment and checked beforehand. It's not a preview issue. I was already using full resolution preview.
Also, my offset value wasn't off, it actually seems like that's what makes it glitch: as soon as i'd change away from the correct value, the frame goes back to its reasonable placement in the cycle. But as soon as i scroll it back to any correct value for a full number of cycles, it jumps to split screen as soon as i land on the exact value. Before rendering, both typing in the correct value and scrolling till you get there will work fine with the frame. After rendering, it's like trying to attach 2 magnets from the wrong ends 👎
*Workaround for anybody facing the same issue:*
If you drag your offset value far enough away from the correct value (for me it was about -/+50) and then make the adjustment layer as short as possible on the timeline, then the frame being off is not noticeable as much. It's not ideal but i obsessed over this and found no real explanation or solution to this rendering glitch
What about the panning from right to left?
Works in the same way, just need to put in different values, that will make it go to the left
1:00 That's called right
When I play in playback it works perfect but when I export it is wrong. glitches weirdly
I resolved the issue. I deleted the offset effect and just moved it using the x value. There is some bug or something with offset
Make sure that you're viewing full size in the program window. If not it messes the offset effect up.
@@barnydillarstone Thanks!
ok cool, and how to do it in the other way?
Change the values to move in a different direction
jesus mf christ, amazing. subbed.
Much appreciated!♥️
i dont have the offset pannel in the effects why ??
Not sure, it's a built-in effect
The blur still continues after the whip pan transition.. any clues what am I doing wrong?
You probably did not set blur amount to 0 at the end keyframe
@@SmertimbaGraphics That fixed it, cheers!
i don't have offset panel why?😢😢
Offset effect you mean? Or effect window where you search for effects
w mean?
My slide got so messy I gave up
Why is that
Why premiere has to make everything so complicated? Vegas was so much easier and simpler to use. No need to spend 3 minutes for one simple transition
You can make a preset and waste less time
thank you!!
Welcome!
thanks
thank you very much
You are welcome
Thank you
Welcome♥️
Thank you!!!
Welcome!