Looks like I’ve got the same loader, haven’t been able to find a model number on it but it’s definitely an Ezee-On. Where did you buy your replacement seals from? Mind sharing a link ?
Craig, I pieced mine together. Dust seal: amzn.to/4ar4GYh Cup seals www.mcmaster.com/9411K18 Rod Seal www.mcmaster.com/9514K187 Mine has a 2.5" bore and 1.5" Rod.
I Sold that tractor last weekend or I would. 1. undo the latches at back of each side. 2. Put bucket on the ground and back up. 3. when the tabs hit the front mounts you (lift) the bucket cylinders kicking the frame down as seen. 4. Unhook the hoses and drive away.
Looks like I’ve got the same loader, haven’t been able to find a model number on it but it’s definitely an Ezee-On.
Where did you buy your replacement seals from? Mind sharing a link ?
Craig, I pieced mine together. Dust seal: amzn.to/4ar4GYh Cup seals www.mcmaster.com/9411K18
Rod Seal www.mcmaster.com/9514K187 Mine has a 2.5" bore and 1.5" Rod.
I have the same loader, any idea what the lift capacity should be?
I would say 3500Lbs at full height I have only had about 2500 on that one but it was not struggling.
Do you know what model this loader is. We have an Ezee on model 60. Wondering if these same parts would work on that.
This is an Ezee on 80-90 If the cylinder diameters measure the same then, yes.
If possible could you make a video of removing and installing the loader. Doesn't seam to EZEE to me. :)
I Sold that tractor last weekend or I would.
1. undo the latches at back of each side.
2. Put bucket on the ground and back up.
3. when the tabs hit the front mounts you (lift) the bucket cylinders kicking the frame down as seen.
4. Unhook the hoses and drive away.
I will pay for the withdrawn complaint