@@megapiston23 bhai maine ek kaam kiya ...... Bike k chabi off postion pe battery point p multimetr lgya.....charge show kiya 13.10 Fir.... Chabi onn kiya ( without starting) aur multi meter ko lgake hand and rare brke ko press kiya bahootbar aur press karke vi rkha dia.......fir vi no change in reading 13.10 ...... back light kholke rakkha hua hai. Kya bolskte hai.....brake line pe koi current leak nhi hai. As no change in multimeter reding
@@fisabilillah786 chabi on karne ke baad thora voltage drop hona chahiye, q ki meter, tcu power leta hai, then ek break ko press karke rakho, 15-20 second, then see the reading, then do the same on other break.
@@megapiston23 brother i disconnected the fuel meter,rpm meter......headlight,upper beam,indicators,bck light etc....... only self ,horn is connected. After chabi onn....13.10 se 13.04 mei aakr rukh jata hai multimeter reading....i press the brakes for 20 sec each but no drop in voltage in meter without starting the byk Byk is bs3.
bro i have these fake brembo they have screw adjustment inside the lever just open the brake lever and adjust it accordingly it will reduce the free play according to your preference
Good info vdo bhai.
Nyci editing .
I have been researching on skyboys brembo lever practicality and fond this video very nice👌 bhaiya nice informational video keep going🎉🎉🎉
thanks bhai
sir agar rare brake light bulb khol de.....lkin uska wiring connection rehega ....toh kya rare brake dabane se battery se charge ghatega???????
wiring me problem hoga to ghatega
@@megapiston23 bhai maine ek kaam kiya ......
Bike k chabi off postion pe battery point p multimetr lgya.....charge show kiya 13.10
Fir....
Chabi onn kiya ( without starting) aur multi meter ko lgake hand and rare brke ko press kiya bahootbar aur press karke vi rkha dia.......fir vi no change in reading 13.10 ...... back light kholke rakkha hua hai.
Kya bolskte hai.....brake line pe koi current leak nhi hai. As no change in multimeter reding
@@fisabilillah786 chabi on karne ke baad thora voltage drop hona chahiye, q ki meter, tcu power leta hai, then ek break ko press karke rakho, 15-20 second, then see the reading, then do the same on other break.
@@megapiston23 brother i disconnected the fuel meter,rpm meter......headlight,upper beam,indicators,bck light etc....... only self ,horn is connected.
After chabi onn....13.10 se 13.04 mei aakr rukh jata hai multimeter reading....i press the brakes for 20 sec each but no drop in voltage in meter without starting the byk
Byk is bs3.
@@fisabilillah786So Wiring is Good
bro i have these fake brembo they have screw adjustment inside the lever just open the brake lever and adjust it accordingly it will reduce the free play according to your preference
Ye to achchi Baat hai