DIY Perodua Alza Cuci PCV Valve

Поделиться
HTML-код
  • Опубликовано: 4 фев 2025

Комментарии • 67

  • @mohamadshahriman6950
    @mohamadshahriman6950 3 года назад +2

    Selalunya ramai yang tak tahu pasal CVV/PCV ni, macam Mr. J H kata, salah satu tanda head cover gasket bocor. Seeloknya setiap 30,000km check dan cuci.

  • @jh-ow2zd
    @jh-ow2zd  4 года назад +10

    Ingat , jangan guna plyer tarik nanti pecah. Letak minyak dulu di antara PCV hijau dengan getah itu. Lepas itu goyangkan dulu. Boleh cuba pusing pusing. Kalau PCV hijau pusing dan getah pun pusing makna getah masih melekat. Kena letak minyak dan goyang dulu.

    • @NurIslam-dq5nk
      @NurIslam-dq5nk 4 года назад +1

      Boleh cakap melayu ke.. 🤣

    • @jh-ow2zd
      @jh-ow2zd  4 года назад

      @@NurIslam-dq5nk memang boleh tapi teruk sikit la lagipun tak ramai request 😆

    • @rezzreeve1643
      @rezzreeve1643 4 года назад

      tq boskurrr

    • @sowseng
      @sowseng 3 года назад

      kalau tukar getah, nak pakai glue tak?

    • @jh-ow2zd
      @jh-ow2zd  3 года назад

      @@sowseng tak payah pakai glue

  • @bhwee9890
    @bhwee9890 3 года назад

    Great video. I recently changed my Kenari’s engine oil, from mineral oil (Perodua) to synthetic oil (Helix 15W50 High Mileage). I notice during engine startup, white smoke emitted at the exhaust pipe for the first 3 minutes. An RUclips video shows that it could be due to this PCV valve.

    • @jh-ow2zd
      @jh-ow2zd  3 года назад

      Oh i didnt know that. Why use such a thick oil? Kenari i remember u have to take out the hose that leads from the engine back to the air filter intake. It normally gets blocked

  • @azrir.8610
    @azrir.8610 3 года назад +2

    new knowledge for me..thx a lot

  • @miorkhairi3937
    @miorkhairi3937 3 года назад +1

    Thank you j h for the knowledge sharing.

  • @kahar_diy3955
    @kahar_diy3955 2 года назад

    Nice 👍..tq so much..Nice cloth that u using..hehehe😅..it seem familiar haha

  • @suhaidiKTP91
    @suhaidiKTP91 4 года назад +1

    New knowledge for..thank bro for this sharing...

  • @qieyishak2624
    @qieyishak2624 2 года назад +1

    Dekat sini yg depa boh toyol angin tu kan..

  • @thequeue3482
    @thequeue3482 6 месяцев назад

    Hi can help me how to take out the rubber bush? Is there any specific method or can just simply pull it out with a plier?

    • @jh-ow2zd
      @jh-ow2zd  6 месяцев назад

      @@thequeue3482 if u are changing it just pull out with plier

  • @ojongchannel7637
    @ojongchannel7637 3 года назад +1

    Ilmu yang bermanfaat sir..But kain lap yang sir gunakan tu macam pelikla 😅

  • @watiemohamed2596
    @watiemohamed2596 Год назад

    Bila goncang bende ni berbunyi tanda dah rosak ke

  • @corptaxmyautotalk8832
    @corptaxmyautotalk8832 4 года назад +4

    If the pcv is hard to pull out, it means that the grommet has hardened and is no longer flexible. Which also means it can't perform its sealing function and need to be changed.

  • @midinmalay6432
    @midinmalay6432 4 года назад

    Tq info bos...

  • @trxg8249
    @trxg8249 4 года назад +1

    May i know, what is the function of pcv valve?

    • @jh-ow2zd
      @jh-ow2zd  4 года назад +1

      A Pressure Control Valve (PCV) is a one-way valve attached to the engine breather pipe and allows the engine to vent crankcase pressure out of the engine. It is also called crank case ventilation valve. By venting pressure out of the crankcase, an engine's piston rings are allowed to seal tighter against the cylinder walls.

    • @metzmatu8409
      @metzmatu8409 4 года назад

      The PVC release the pressure (with unwanted gases) and send back to the combustion chambe via intake manifold, in order to reduce air pollution. (The unwanted gases, called "blow-by" from the combustion chamber which have leaked and pass through the piston rings into the crankcase create extra pressure inside the crankcase.)

  • @diel_khayal
    @diel_khayal 3 года назад +1

    kain tu mne nk beli

  • @nuhilabdhan6482
    @nuhilabdhan6482 4 года назад

    Tq info

  • @imranhazlan2970
    @imranhazlan2970 4 года назад +1

    hi boss,kalau pakai oct or occ(oil catch tank) nk pasang dekat mana ya? cos i saw some assmble dkt pcv,some assmble dkt hose before throttle body

    • @jh-ow2zd
      @jh-ow2zd  4 года назад +1

      Lepas pcv hose itu kena potong letak sana sebelum masuk trottle body

    • @imranhazlan2970
      @imranhazlan2970 4 года назад

      @@jh-ow2zd okay paham..thank you boss

  • @lokmanhakim6989
    @lokmanhakim6989 4 года назад

    i want to replace the hose .. can i buy vacuum silicone hose for it? and what size yea? 10mm? 8mm?

    • @jh-ow2zd
      @jh-ow2zd  4 года назад +1

      Yeah silicone should be ok. But i dont know the size. Sorry

    • @lokmanhakim6989
      @lokmanhakim6989 4 года назад

      @@jh-ow2zd okay2. Nevermind. Thank you ya boss

  • @sowseng
    @sowseng 3 года назад

    my pcv valve side rubber is leaking, do I need to glue it?

    • @jh-ow2zd
      @jh-ow2zd  3 года назад

      No u need to change it

  • @viraltop7997
    @viraltop7997 2 года назад +1

    ilmu yg baik. tq for info. tapi kenapa awk guna seluar dalam cuci pcv valve? 😂😂

    • @jh-ow2zd
      @jh-ow2zd  2 года назад +3

      Perempuan tinggalkan kat rumah saya nak buat apa lagi!

    • @benjaminazon7492
      @benjaminazon7492 6 месяцев назад

      😂😂😂​@@jh-ow2zd

  • @pasagjujok
    @pasagjujok 3 года назад

    Kalau pcv tu patah macam mana nak cabut bos?

  • @dianzsulongzerotohero6048
    @dianzsulongzerotohero6048 5 месяцев назад

    nak tnya dlm bahasa MELAYU ada tak😂

  • @gbilhamid1317
    @gbilhamid1317 4 года назад +1

    boleh guna throttle body cleaner ??

  • @henrythien
    @henrythien Год назад +1

    omg the cloth

  • @fariuslagenda-xx3kq
    @fariuslagenda-xx3kq 10 месяцев назад

    Klo timing jd x stabil boleh jd ke tersumbat

    • @jh-ow2zd
      @jh-ow2zd  10 месяцев назад

      Timing tak stabil cuci trottle body

  • @faizulb
    @faizulb 4 года назад +1

    sintom2 kalau rosak apa yg jadi ye??

    • @jh-ow2zd
      @jh-ow2zd  4 года назад +4

      Takde sintom. Enjin mudah jadi panas. Enjin gasket senang rosak. Minyak hitam leaking. Kadang kali mekanik tukar gasket baru pun tak check valve ini. Lepas tu gasket baru pun rosak lagi.

  • @hamidrahman3021
    @hamidrahman3021 3 года назад

    Nk tnya benda hijau tu ape nama? Dan getah dia?

    • @jh-ow2zd
      @jh-ow2zd  3 года назад

      PCV valve. Satu set

  • @pasagjujok
    @pasagjujok 3 года назад

    Ada jual untuk waja mmc kah bos?

    • @jh-ow2zd
      @jh-ow2zd  3 года назад

      Jual apa boss? Saya bukan kedai la. Pergi kedai cari ni barang murah

  • @aminmohd-dv1oo
    @aminmohd-dv1oo 3 года назад

    bengkel kat mana bos?

    • @jh-ow2zd
      @jh-ow2zd  3 года назад

      Haha takde bengkel la. Diy je

  • @shakir43shaq86
    @shakir43shaq86 4 года назад +2

    Spender awek mane tu bro buat kain buruk?😆😂😂..

    • @jh-ow2zd
      @jh-ow2zd  4 года назад +3

      Lepas enjoy, awek tertinggal spender nak buat apa? Bolehlah buat kain buruk!

  • @yusrizalbandi5709
    @yusrizalbandi5709 3 года назад

    Spender janda mana ni bos buat lap...hihihihi

    • @jh-ow2zd
      @jh-ow2zd  3 года назад +1

      Tak pasti la. Ramai perempuan yg tinggal spender!🤭

  • @sampck
    @sampck 4 года назад +1

    Omg!! Did u just used a panty to wipe off the grease🤣🤣

    • @jh-ow2zd
      @jh-ow2zd  4 года назад +1

      Thats the best use for panties collected!

    • @sampck
      @sampck 4 года назад

      @@jh-ow2zd 🤣🤣

    • @handcannon9814
      @handcannon9814 4 года назад

      Hahaha. Very perspective

  • @adamkumar2117
    @adamkumar2117 4 года назад

    None of the auto parts store doesn't know about the PCV valve, its really sad

    • @jh-ow2zd
      @jh-ow2zd  4 года назад

      Maybe they call it engine breather valve, or one way valve? Perodua SC definitely knows

    • @adamkumar2117
      @adamkumar2117 4 года назад

      @@jh-ow2zd I appreciate your reply, I think I'm not using the right terminology for the PCV

  • @pasagjujok
    @pasagjujok 3 года назад

    Kalau pcv patah,macam mana nak cabut bos?