How to Install Cabinet Door Handles & Pulls - Decorative Hardware Installation
HTML-код
- Опубликовано: 25 июл 2024
- #woodworking
www.woodworkerexpress.com/
www.woodworkerexpress.com/
Check out our store- bit.ly/WoodworkerExpress
In this video, we will show you how to install decorative cabinet door pulls on your kitchen cabinets. #WoodworkerExpress has all of your Cabinet Hardware Knobs, Pulls, Backplates, and accessories for all of your decorative hardware needs in your kitchen, bathroom, furniture or anywhere a decorative knob or pull is needed. Upgrade the handle on your refrigerator with our selection of appliance handles. Our selection doesn't stop at the interior cabinets, we even have items to dress up the exterior of your home such as house numbers and door knockers and door knobs and levers. View our full selection of decorative hardware products at www.woodworkerexpress.com/Dec... 
Хобби
That handle looked mighty crooked 🤔
lol all of them actually lol
Lol I thought I saw it crooked and then boom I saw the commentaries confirming
All of them 🥴
Parece que las instalo con el culo
Same.
Yep!!! That TP jig is an awesome jig!!!
Thank you so much. I never put handles on before and I’m building a tiny home and you were a great teacher.
Create tips! Thank you!
Nice work! You made that look like a pretty easy project that I could do myself.
This worked perfectly for me. Thanks!!
Thank you. Very helpful info.
Glad it was helpful!
Thank you! 😊
You are very welcome! We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART
Pocket Blow Gun- FREEAIR
Fastcap GluBot- FREEBOT
Knee pads- FREEPADS
Blum tape measure- FREETAPE
Blum Screw driver- FREEDRIVER
Blue Light Safety Glasses- FREEVISION
Thank you!!!! 🙏
Great video
Thank u 🙏
To the point. Good video
Appreciate it!
Great work. plz can you tell me what is the bit size you used for hole
Nice job
No it wasn't! That first handle was crooked, or are your eyes out of alignment?!
Great job
Thank you!!
What size was the drill bit? How do you know which size is the drill bit to be? Great job!
Thanks! You can use a 3/16" drill bit. Here is one -www.woodworkerexpress.com/bosch-b14602-brad-point-bit-3-16-dia-3-1-2-overall-length.html
All that measurement, number and math to drill and screw it crooked 😳
The first one you did looked crooked to me. That would drive me crazy.
I dont think it was but you never know! Also, We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART
Pocket Blow Gun- FREEAIR
Fastcap GluBot- FREEBOT
Knee pads- FREEPADS
Blum tape measure- FREETAPE
Blum Screw driver- FREEDRIVER
Blue Light Safety Glasses- FREEVISION
it's the shadow/light reflection on the top that makes u think it's crooked. It's brighter at the top and dark at the bottom
I see that too
It's not crooked. The set came from a studio used to film episodes of Batman.
How do you know size of hole and how deep to drill?
Great video! Does it have to be the blue tape? Also, I only have a sharpie with a thick point end. Can I use a pencil instead?
Great questions! You can use any color tape that your heart desires and a pencil is probably a better choice actually.
Ty
YW
How about a right handled ruler & a jig?
شكرا
Tank for help me
Installing cabinet hardware is not an emergency. Even if your wife says it is. Just buy a $20 jig. Even with a speed square, a level and drilling slightly larger holes to make adjustments it's too time consuming and level of precious too high. Even if you measure perfectly your drill holes can not be off in any direction. Consider your cabinet s might not be level horizontally and vertically. Same with the doors. Especially for a vertical
it is an emergency, I'm pulling the cabinet drawers off track 😆. But I guess my husband agrees with you.
You think if I put a laser line on it it would be more straighter🤔
How do you know how deep to drill? What drill bit size did you use for the holes?
You would drill all the way through with a 3/16" drill bit like this one- www.woodworkerexpress.com/bosch-b14602-brad-point-bit-3-16-dia-3-1-2-overall-length.html
I hold my bits up to the hardware and just eyeball it. If it fits inside of the handles screw holes snug it’s a little too small
3:30 is it out of plumb?
What size drill bit did you use?
3/16" drill bit and We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART
Pocket Blow Gun- FREEAIR
Fastcap GluBot- FREEBOT
Knee pads- FREEPADS
Blum tape measure- FREETAPE
Blum Screw driver- FREEDRIVER
Blue Light Safety Glasses- FREEVISION
That's the same question I had... Had to fish thru the comments, like I assume many others did as well...
This will change your life.
I am trying to reinstall the same bar handles. The company that sold me the house put screws in that are too long so the “housing-the two legs attached to the handle”from the handle separated and you can’t get the screws out so you can install new handles correctly. Any quick fix?
not sure if i understand the question.
I used a template on my install
I was gonna say…;-p, a few of em looked crooked! The jig is the secret, but use a square versus the tape when possible and never ever drill a door that is closed!!!!
You didnt show what you used to predrill the holes.
Nice job but your door pull is crooked, why not make or use a template? Much, much faster and more accurate.
What is crooked?
Fail to see why people are suggesting a level for a handle. It'd be crooked to the cabinet using a level, unless the cabinet is fine in which case a level isn't needed.
good job. those are HUGE handles! lol
Yes they are!
His wide angle lens did that 😂
Bruh, that handle was crooked as shit. Fail…
I blame the webcam! LOL. The camera stretches the room to get a wide angel shot and distorts everything. I looked at it in real life and the handles are all pretty much perfect. But they doo look crooked in the video, you are absolutely correct!
Handles are crooked. Also, the main thing I needed help with was what drill bit is used. He passed right by that.
why measure every time instead of making a jig that is exact
Never been more Confused ever
Buy a template. No need to waste your time measuring.
But if you do decide to get a templete, We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART
Pocket Blow Gun- FREEAIR
Fastcap GluBot- FREEBOT
Knee pads- FREEPADS
Blum tape measure- FREETAPE
Blum Screw driver- FREEDRIVER
Blue Light Safety Glasses- FREEVISION
Ahh it’s crooked!!
No level?
Damn, those handles are crooked as Hell! I'm thinking he should have used the fancy pull guide! Too funny.
Came over from the Funny Carpenter.
Thanks for coming!
This doesn't show the inside of the cupboard which can loose facia as the drill comes through. So too much being clever on the outside, not thorough enough on the inside of the cupboard.
No level on it?
No, i haven't tried that! We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART
Pocket Blow Gun- FREEAIR
Fastcap GluBot- FREEBOT
Knee pads- FREEPADS
Blum tape measure- FREETAPE
Blum Screw driver- FREEDRIVER
Blue Light Safety Glasses- FREEVISION
Use a square or atleast a level next time lol
Why did they use floor tiles on the wall. That doesn't look good.
You made it too difficult for me
Ha! It wasn’t even! Use a level folks and be sure to line your holes up. Make sure your door is also level.
Is it just me or did that handle look super skew?🤣
Re-title the video to: How to ruin a cabinet door
😂😂😂
I dont think people will search for that though 😑
@@Woodworkerexpress LOL! I'm just playing, it's not a difficult task but a crafty one for sure. Just the thought of poking the hole wrong is nerve wracking🫣 😂
Those drawer handles look super wonky!😅
Which ones?
This is what not to do. You got a measuring tape and no square? Guessing is dumb
Learning shit like this, gets you laid!!! Ladies love this shit for some reason lol
Lol!!!! Let me guess you do not have a girlfriend? 😅
Actually women like it when men do physical activity!!!!!
Absolutely it does!!
3:19 is crooked… I thought it could be the camera but the tape is off and both holes are in the middle of the tape.. it’s definitely crooked
Hmmm... I'm beginning to think this video should be added to a #flatearth playlist
bro WTF was that first handle lmfao
Why demonstrate and put the handle on crooked 🤔 .....😅
Crooked handles are the new trend, didn't you know?
Always use a level people, and get a pics of cardboard, cut it and use that as your pilot. Don’t do crooked shet
Whats shet?
Homie skipped the whole drilling part
Bro, it’s crooked. Are you serious????
The guy below has money to waste 😃
Waste not want not! We are having a few Free promos going on right now as well. Here is a list of items that you can add for free using the coupon codes. Limit one per order: Quart (32oz) Titebond Wood Glue- FREEQUART
Pocket Blow Gun- FREEAIR
Fastcap GluBot- FREEBOT
Knee pads- FREEPADS
Blum tape measure- FREETAPE
Blum Screw driver- FREEDRIVER
Blue Light Safety Glasses- FREEVISION
The blue tape is slanted and so is your pull. Is this a parody? Lol
It’s not straight! 😂
It really is, just the camera was set on wide shot and warped everything. ALthough the video is getting views thanks to that warp so ill take the crooked!!!
Does a how to video, and puts them on crooked.
Incompetence is astounding ...
All of them look crooked probably more of a good salesman than a handyman lol
Crooked as hell.
It wasn’t straight 😂
😂😂😂 right
The handle isn’t even straight
Are you sure?
Crooked
NEVER EVER MAKE MEASUREMENTS LIKE THAT!! Always make a model with hard cardboard, or wood, and practice on scrap wood before on actual surface.
This is so confusing
Lol, that was bad.
Holy cow. You butchered that
Crooked installation lol
Bent as fk lol
Thatz how we roll
Looks like shit. They make jigs for common size handles and pulls. Lowes or home depot have it
Thanks for watching! I really hope this video helped you with your handles
It looked crocked, really and too much mathematical, 👎👎👎 my wife makes it better and faster