Anderson Kiger 9C Range Review
HTML-код
- Опубликовано: 2 окт 2024
- The Anderson Kiger, like its namesake stallion, is an independent, bold, and powerful striker-fired, polymer handgun. Its sleek lines, and short, crisp trigger pull, allow the user to be confident, quick, and accurate, even under extreme conditions.
The 15+1 capacity gives you the freedom to discreetly carry wherever and whenever you need to. Compatible with most Glock Gen 3 aftermarket accessories, you'll never run out of ways to customize your Kiger to fit your unique personality.
You can shoot these in our range or shop them on our KYGUNCO website!
The best Glock 19 Gen 3 clones are made by Bul Armory in Tel Aviv, they have rectified all the shortcomings of the original Glock 19 Gen 3 including sights far superior than the standard Glock factory sights, your clone has Failed to do so and as such you should rectify that flaw ASAP or your pistol will sink into the abyss of Failed Knock Off Glock Clones
Frame is from SCT. Love the double undercut.
SCT 19. 42 doll hairs (stripped with locking block) from Aim Surplus to ARFCOM members. A lot of guys are already running the Kiger 9C / SCT 19 frame with a Compact Dagger slide assembly. The frame has been well-received. 👍
Yeah I own two of them 😅
@@whytehunter50504
They dropped the ball by not making it optic ready with an RMR cut! The logo is gaudy too. I like the look of the frame. I think the PSA Dagger will outsell this though for the price.
Just ordered one and an assembled frame. Hoping has a less cheepo feel than the PSA. Will run it through some drills before I add these to stock at the store. Anderson has been a great line for us and the DLC coating at this price point speaks well.
Think there a little late.
PSA has had the Dagger for a while same firearm based off Gen 3 Glock-19
1-15rd PMag same crown barrel front & rear seration Stainless Slide,barrel DLC Coated Steel site’s & Steel Guide Rod (Not Plastic)and great ergonomic polymer frame. Start at 299.Doll hairs. Wonder what this basic Anderson cost?
I believe it’s 379. No thank you.
And the dagger comes with an optic cut for 300
Well you're likely going to be spending whatever difference between the Anderson and the PSA by replacing that S&W-style hinge trigger that almost no one likes.
@@josephesquivel4066 HaHa if you only knew. 😂
I saw a couple reviews on this Kiger .... I'm liking it ...
I’m diggin it, hopefully it stays cheap and reliable…
Without optic ready??? No thank you
All the scallops on the front slide and frame are nice and snag resistant. I don't like glocks much, but this appeals to me. Just think, glock has been sitting on their ass for decades and could have easily evolved to stuff like this.
Front and rear serrations, top cuts, agressive and well patterned stippling, etc. It has a lot to like.
And it looks great
I'm a certified gunsmith and Licensed FFL dealer, I deal with Anderson Guns alot the Kiger is a awesome gun.Any Glock 19 Gen3 part will fit this Frame, The same with the Palmetto state Armory Dagger, parts are interchangeable, the KCI Glock 19 Mag will fit this perfectly. i have Built several variations of the Kiger Pro using all Glock 19 Parts. personally i will take the Kiger over a Glock any day
I bought the Stoeger 9mm for cheaper and love it.
I just got one Recenty at my LGS for $250.00. Got 3 more P-Mags and 2 Glock OEM Mags. Did a Ballistol treatment with it and went to the range and fired well over 500 rounds. Ran flawlessley with the mags and ammo that I have. Very Smooth shooting gun.
I love how everyone trashes the Kiger 9C and never even shot it due to it being from Anderson Manufacturing. I own a Arex Delta M Gen 2 as well as a Taurus PT92. So far this "Poverty Pony" is the winner. Plus for $250 I feel I got it for a steal.
Funny thing is one of the people who works at the Range I train at has a bunch of "Gucchi Glocks" and was impressed with my Kiger 9C straight out of the box and standard as is when he held it and tested it out. He is going to get his "Poverty Pony" now just the basic version.
All in all not a bad handgun to have.
Needs an optic cut. Would look better without the Anderson logo in white.
That is indeed a very nice entry level 9mm with DLC stainless steel slide and barrel. Glock upgrade aftermarket parts should fit it. What’s not to like? Anderson Kiger 9C
It has worse sights than Glock factory sights, if you are going to clone a Glock start with better sights than the original
Nice pistol
Just purchased one yesterday took it to the range with the standard 15 pmag and it ran great no issues. I also tried the 17pmag as well as the factory Glock 33 rd magazine again 0 issues
Awesome! Thank you 🙏🏻
I'm not really liking the ejection pattern on this gun... I have a P80 that I built and had the same weird ejection pattern. I ended up switching some parts from gen3 to gen4 and it solved the issue...
When this gun price drops to 260 doll.hairs then it will be worth buying! At 350+ leaving me wanting more gun or something different in the Glock clone family!
Not been a Glock fan, partially because of the price point (also I can't get guns like the G42 to run right, innmy 'gorilla' hands),
this might just sway me
I dont know how to say this... other than it just looks like its missing serrations on top of the slide.
And missing decent sights!
The only thing I despise is the logo. It just makes it look cheaper that what it actually looks like. We'll at least it isn't as bad as taurus's logo lol.
The Kiger is my spirit animal... 🐈🐅
I’m a buyer at $300. If it’s $400 with 1 mag I’d probably just go for an actual Glock
actual Glock huh =/
A actual Glock would cost you almost twice as much though.
Just get a PSA Dagger Glock 19 clone for $299
@@josephesquivel4066 lol idk where you shop, the shops I know anybody can pay 325 plus shipping for a Glock 22 gen 4 lmao 😂 y’all really do blow gun prices out of proportion, learn where to look for your 2a items. You can get Springfield xd full sizes for 300 plus shipping on gun broker, he’ll… I even found a few Glock gen 5 on gun broker for 455 plus shipping, comon people.. it’s not hard to be a smart shopper
@@DIXONSIDER00 We don't have a variety of gun stores around
“Rapid fire”? 😂
Shoots great, but those front groves are horrible.
What Glock mag is that?
Pmag
Will gen 4 magazines fit inside the kiger9c? Since gen 4 magazines run in the original Glock gen 3?
didn't S&W get sued for copying a Glock?
Yes, before the patent expired.
No manual safety?
What’s a manual safety?🫤
It's a Glock clone. So no.
It's A better GLOCK =) i want one.
What, no ambi controls?
It's a Gen 3 Glock Clone unfortunately. There's not much ambidextrousness to those parameters.
@@josephesquivel4066 yeah, I was expecting too much.
You left handed?
@@finalcountdown7658 I shoot ambidextrous. Mostly southpaw tho
So it's a steel Glock
No polymer lower